Results 1 to 7 of 7

Thread: MSI K9N6GM USB ports not working.

  1. #1
    Join Date
    Jun 2011
    Posts
    84

    MSI K9N6GM USB ports not working.

    I have a line of USB audio interface 6 PODxt Live. Basically, when I connect to my computer that functions as an audio device at first I thought it might be the problem with my POD, but I have tried on another computer and was working fine. I updated and reinstalled drivers tons of times, but did not work. In the end I decided the best thing to do was to reformat my computer. I did, but the problem remained. At the moment the only option I can think of is that the motherboard is not working properly. I hope you can tell me how to check, fix in any way or just give me an idea of what could be.

  2. #2
    Join Date
    May 2008
    Posts
    1,137

    Re: MSI K9N6GM USB ports not working.

    Well, it's an AMD Athlon 64 X2, 2 GB of RAM. I'm not sure what you mean by power, but because it uses a 220 volt source. I tried all the USB ports, front and rear. The POD is correctly identified. I can use my POD program used to load the tones (guitar effects) and store things. Just does not work when I use it to record or play audio. I talked to the manufacturer and I could not help. They did everything possible, but it is not a problem of POD, but PC hardware (apparently) the problem could not do anything. The POD used to work perfectly on my computer a few months ago. The last time I remember the recording was about to July last year, I think. Then, after graduating from college in December, returned to record some things and just did not work.

  3. #3
    Join Date
    Feb 2008
    Posts
    1,260

    Re: MSI K9N6GM USB ports not working.

    P4-520W is a Machtech, functioning for 220 volts. Though, as I said before, I'm quite sure the PSU is not the trouble since I distorted PSU otherwise another PC at home and does not solve anything. There must be something with the motherboard, most likely. In case you need to know, I checked for updates from Live Update tool and none was found. Indeed, the problem started within a month, but I'm sure the date has nothing to do with what is happening. I never wanted were expensive PSU.

  4. #4
    Join Date
    May 2008
    Posts
    1,295

    Re: MSI K9N6GM USB ports not working.

    I just checked my front USB connections to the motherboard. A group of wires that lead to some level pings JUSB1:
    • |GND|4+|4-|VCC
    • O|GND|4+|4-|VCC


    All are connected with the exception of the upper left (white) and lower left one (the one with a circle).


    On the JUSB2 I have:
    • |GND|7+|6-|VCC
    • O|GND|7+|6-|VCC


    are all connected except the upper left (blank).

  5. #5
    Join Date
    May 2008
    Posts
    976

    Re: MSI K9N6GM USB ports not working.

    I have not bought the power supply yet, but I have a question, because I'm starting to doubt that the problem is. I will explain to check the power supply was the problem that changed the one on my PC with another power supply from an old PC at home, a Pentium IV of six (or more) years of age. I should clarify that when I tried both in my line 6 audio interface and the webcam on that computer it worked perfectly. What happens is that when I tested two devices on the computer with the old Pentium PSU did not work. The problem was still there as before. That power supply is also very bad. I think it's even worse than my PC, but I have no problem recording with the team so I wonder if, knowing that, I still think the PSU is the source of all this. Or maybe you have an explanation of why it was that way.

  6. #6
    Join Date
    May 2009
    Posts
    1,010

    Re: MSI K9N6GM USB ports not working.

    It’s up to you whether you like it or not. FYI, a P4 uses 5V, mainly in the use of new plaques mainly 12V. Power supplies are overloaded to all sorts of problems. Can I play heavy 3D games full sound system and options without crashing or funny sounds? That's typical of a test to see if it holds a power supply. And what we've done is replace with another crap PSU power supply what the hell to solve the situation? Have you opened the trash PSU to see how the cover look? Your problem may be anything, but it is useless to try anything else with these fools PSU.

  7. #7
    Join Date
    Aug 2009
    Posts
    922

    Re: MSI K9N6GM USB ports not working.

    Since all you are driving is the processor and motherboard you require 350watts and an elevated amperage rating, but provided that you have a film card weighty and a sound blaster with huge speakers, then you require more. In the event that your capacity supply has debilitated the framework will back off the voltage. Since the voltage is let down small eager parts will pull more current and heightened current parts and smolder, it would be able to particularly well have broiled something on your PC and the just way to root out what is the transform of disposal as Bas declared you might as well begin with a stable supply of great vigor. One thing you are able to attempt depending on if you have a sound card and attempt to evacuate the combined sound yields, you are able to moreover attempt the sound card in an additional PC.

Similar Threads

  1. Ps3 USB Ports not working
    By Unnati in forum Portable Devices
    Replies: 6
    Last Post: 08-06-2011, 03:54 PM
  2. USB ports stop working
    By Rich T in forum Vista Help
    Replies: 6
    Last Post: 11-05-2010, 01:04 PM
  3. SATA Ports Not Working
    By K88 in forum Hardware Peripherals
    Replies: 4
    Last Post: 28-04-2009, 10:30 AM
  4. ASUS P5Q USB ports not working
    By Demeter in forum Hardware Peripherals
    Replies: 3
    Last Post: 03-01-2009, 10:45 PM
  5. No usb ports working !!
    By Salome in forum Portable Devices
    Replies: 6
    Last Post: 25-09-2008, 12:09 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,750,757,470.76994 seconds with 16 queries