Just go the following link and download the driver for you scanner - http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14584&infoType=Downloads. After that use Winrar to extract the file....
Type: Posts; User: RoninBlade
Just go the following link and download the driver for you scanner - http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14584&infoType=Downloads. After that use Winrar to extract the file....
You can try a solution that has worked for many users who have got this same problem with this same card. First connect the drive or memory card to your pc with a card reader. Go to Start and in...
What you can do is simply connect the android device that you have via usb port and then remove the ADB drivers from your computer by going into Device Manager. After that unplug your Nexus device...
Did you ensure that you are connecting the USB mouse on usb 2.0 port and not usb 3.0 port? Another thing you could try is to uninstall the mouse drivers completely and then shutdown and disconnect...
The Antec VP650P power supply is similar to a Corsair CX model, so it will be fine to use it for office purpose or little gaming at stock speeds. But if you consider to overclock your CPU or GPU then...
Yes, go with the Antec HCG M Series HCG-520M 520W which will cost you only $80. It comes with 2 x 6+2 pin connectors and has more than enough connectors for the 8 Sata devices. You can also use the...
If the above solution doesnt work then you can try a couple of things to install the printer fully. First of all unplug the usb cable. After that uninstall the software from the CD. Now you need to...
There is a driver of Atheros AR3002 for Windows 8 that you can download from the below link. It supports this many types of cards such as - Qualcomm Atheros AR1005 Bluetooth 4.0 + HS Adapter,...
I was using an old laptop which was very slow. I read few articles on the internet that replacing an old mechanical hard drive with a SSD will increase the performance of a computer to a greater...
Well, have you tried swapping to another Sata ports? Also you should try to triple check the cables for both the Sata and Power cable. Can you test on another computer to see if the SSD is getting...
If the above solution doesnt work then try changing the power options for usb devices. To do that first remove the usb mouse and then open device manager. After that go to Universal Serial Bus...
You should get the Antec VP650P V2 650 Watts PSU which is compatible with the new generation of Haswell processors. I was previously using another model Power Supply and had overclocked everything...
Try this steps. First log on with admin account in your laptop. After that file the folder whose owership you want to take and right click on it. Then go to Properties > Security tab. After that...
This problem basically happens because of some pairing problems between the computer and the receiver. So, incase you are not able to see the keyboard and mouse settings in the Setpoint application...
The Antec Eco Neo 620 watt power supply is made by Seasonic and this brand uses quality stuffs. The Geforce GTX 750 TI needs only 20A on the +12v rail, which is equal to a minimum power requirement...
Well, you can even try to replace the Logitech K800 wireless keyboard which normally has 3 years of warranty, depending on where you live by the way. You can follow the same routing even if it is...
There is a new low power-state called C7 in the Haswell CPU's. When it was going to launch then there was a warning with this new C7 that it will use very little power which may cause the PSU to...
You can try to eject the disk from the optical drive by soft-pressing the indicators or LEDs for optical drive eject button. You can also try to change the settings such as the display brightness and...
Can you go back to the Repair store and ask them to connect it up and also show you whether there are no files or so. Incase they are also not getting their computer to detect your external hard...
Did you check whether you have the latest firmware version installed for your Kingston HyperX 3k SSD? If not then try to get it from the Kingston website and install it first. You can also try to...
I agree that your Kingston 240gb SSD is have problems right out of the box and it will be good if you replace it as soon as possible. The error that you are getting means that some of the NAND chips...
You can easily disable the tap-to-click feature but for that you have to install Setpoint software. So, after installing the same software launch it and then click my Mouse tab. Now choose the...
I was also having the same issue but I have fixed it now. You will need to install Activesync 4.5 first. Now if you connect your device and it asks you for the generic RNDIS driver then you can...
Well, if you do not wish to use the setpoint then you will simply lose he DPI of the mouse. This software is used to set the DPI of the mouse to 400 standard and hence the mouse is offered at a high...
With the cloning software you will be able to choose what drives you want to clone, it will be obviously C: drive but. Just plug in the SSD by powering off your computer and then restart your...
Do you have any GPU installed on your netbook? If yes then try to disable it and see after that by plugging the Corsair Force GT 480GB SSD you get the same issue? If your system is working stable...
I would say that a 620W power supply would be plenty for powering a single graphics card, even if you are doing some overclocking of CPU and GPU together. But if you want to add another video card in...
What is the temperature you are getting after you installed the new CPU. Anything above 60C is somewhat a hot temperature and you will need to cut it down because it will definitely be rising in the...
Well, if it is a R9 280X Toxic graphics card then I heard from everywhere that it will need a Power Supply of atleast 750 Watt for a single card. If you would like to crossfire with 2 video cards in...
Could you please tell us what is the make and model of the logitech mouse that you have? It might be that you are using an outdated or an old version of the Logitech Control Center program. So I will...
All you need to do is download the audio driver for your Acer laptop from the official website of Acer. Just go to this link - http://us.acer.com/ac/en/US/content/drivers and then Select the product...
I was also having the same issue with this Bluetooth Keyboard. After doing some research I fixed this problem by downloading and installing the Vista drivers. I simply ran its setup file in...
You can try to rename the LOD files which is a safer method to peform the update. This way they will match the corresponding entries in the update matrix and then re-execute the updater. You can...
For this type of problems, the hard drive can be recovered for the error quite comfortably. You will have to check or identify what all sectors have gone bad from the hard drive and then mark them as...
Well, can you try to just reset the BIOS if there were some settings that you have done before which were not correct. If this settings have messed the voltages or something then there could be a...
Can you try to turn off any Power Savings in Windows and the BIOS as well and see if that works. Did you also try to use a different Sata cable and port in your computer? Can you also try to install...
Well, I was running Windows 7 on my computer and having the same problem with the error message. After searching for long, I noticed that the setpoint was executing...
If you dont how to update or manualy install the msahci.sys file to your Sata AHCI controller that is acutally listed under device manage or IDE ATA or ATAPI controllers, then I better suggest that...
Sharp is actually one of the few panel makers in the world, that you cant find around the corners. And having only the panel deosnt mean that you will get good picture quality from it but with the...
Can you tell us what Setpoint version of the program are you using in your computer? Since this is logitech's newly launched product, so you might require to install the Setpoint version of 6.51.8....
RoninBlade
Follow the below steps to connect the Logitech Solar Keyboard to your ipad:
Place your iPad in the tablet keyboard's holding bracket. The lip should fit firmly around the iPad on...
You can go with the Noctua NF-P12-1300 120mm Case Fans. It is a very quiet cooler and also moves a lot of air. The design of if is nicely constructed. I am using it for the past 2 years and still it...
If you want to change the proximity sensor of Logitech mouse then follow the below steps:
First of all you will have to download the ProxiTool from this link.
After downloading it double click...
Follow the below steps and see if that helps you to repair the Non System Disk error:
First of all you will need to download a non system disk error repair tool like Regcure, or if you want other...
If your logitech mouse in under warranty then you can claim for a replacement for a new mouse. You just need to go to their product page and then select your country/region and then check on a label...
You can try to disable the cpu fan error incase you had an actual watercooling loop, you should not have anything plugged in, check in the BIOS settng to disable it. This problem also happens from...
I have gone through this same issue and I would like to suggest you to check the cartridges. The printer giving this error due to the issue of cartridges as well and I would like to suggest you to...
I have gone through this same issue and i have goggled out lots of time to solve this issue but I didn’t have the any solution to mine issue. So therefore finally I have decided to contact the...
There might be several packing stuff contained by the printer. Glance inside the printer, as well as access door carriage. The shipping lock could still be in place on the left side of the HP...
I was having the same problem on my printer also. I've seen the same problem in almost all 64-bit Windows machines. Sometimes I think the real problem is 64-bit, Microsoft should do something to...