DG41RQ on board lan problem

[Who is it]

I buy a new computer DG41RQ motherboard that i use a DLink NIC 100/1000 on board the problem is that i need my DLink card connected to my computer but i do not watch it why when I plug my ethernet wire into my motherboard ( P5K ) I no longer connect. I wish I could but the card plugged into my mother as I am able to use my DLink network card for my computer. Please suggest. Thanks in advance.

[PeterAGASSI]

If you are going to have a look in the Device Manager> network cards .
You should see your two cards ( or more if for example you owns a 1394 card ).
- Wi Fi ( ta broadcom )
- an ethernet ( realtek or another) .

[Baltazar]

In Windows (probably the same on XP) you go to the properties in network and you click on " Advanced ... " menu, Then you select " advanced "and you get a window property of network cards and their links with the services and protocols. Under the above you have the means to raise or lower the LAN interfaces and so defining dictionary stacks priority .

[Sebastian.j]

You will used the service " routing and remote access " to Windows. I'll board this software solution , because it is more compatible with other positions (since they are in windows too) because the VPN equipment demand the same brand of two sides. Afterwards, he will also need a domain control to manage users and access rights. So, there you also need a DNS and DHCP. In fact , you must put an extranet . It has long done, but as you 've finished , you're like in a local area network ( file copy through the export , network play over the LAN , WAN , LAN encryption between the WAN ) . After you have make your LAN pro version, you need to make it accessible from anywhere. Everything depends on your operator. If you have a static IP , no pb, and it gives you everything. For cons , so you have a dynamic IP , you must use services like Dynamic DNS or No -IP. It's free, you can manage up to your own domain name.

[Ernest]

Copy the file from mprsetup.exe directory where you placed the files installation to Systemroot \ System32 folder on your computer Windows NT Server. Running Setup
1. Open a command prompt on the Windows NT Server.
2. mprsetup Run and enter the path the installation files.

[Simond]

In the bios of the motherboard, there are the options for power supplies. In this section you must indicate the port of pci pc which has the right to " wake up ". Sometimes it is just that. The config do this by selecting either the port pci irq or the additional card , it depends on the model of the bios.