Huawei 3G modem
I would like to know if anyone using E169G 3G modem . just got it from 3 but EEE does not seems to detect this modem.. Anyone get it working?
THX for the information , I realized that E220 is working out of the box. it seems not so many people out there using E169G tho.....just have to keep digging..
My friend just installed on opensuse 10.3 a huawei 3G usb modem (3.5G actually), and just now noticed that opensuse does have a support page.
SDB:HUAWEI E220 Support - openSUSE
It took him a long time but now he found it simple although he did not follow any of the steps in the above howto.
For those who still like to thinker with the prompt here goes an alternative way that I collected from this link:
[3G_Tutorial] Huawei Card E620/E220 - Techzone
In OpenSuSE 10.3 (64 bits) the kernel version supports the device.
It basically says the following:
connect to the usb the device and then make as root
Bus 004 Device 012: ID 12d1:1003
The ID part is the important one.
now is a good time to for example shutdown ethernet configs ...
Now the important:
rmmod usb-storage && modprobe usbserial vendor=0x12d1 product=0x1003
I made it run with kppp and my config works for vodafone in Portugal, elsewhere some parameters obviously must change.
It is very simple:
The link above shows the wvdial config and it work ok.
In the connection make a new connection with:
- IP : dynamic
- Gateway: default gateway, and check the box :
assign the default route to this gateway
check: Disable existing DNS servers
In Kppp modem section make a new modem with
Line termination CR
Connection speed 460800
Check use lock file
- Check wait for dial tone before dialing
- in modem commands:
if your card requires a PIN then init1 = AT+CPIN=1324 (pin number)
I place one of the clone sim cards I use (one for the Nokia E90 another for the huawei dongle) on the Nokia E90 and removed the PIN protection.
init2 = ATZ
All other parameters in this panel where default.
Before we can dial there was one last problem:
pppd gave an error both on kppp as well as on wvdial
pppd unrecognized option 'passwordfd'
I realized that all peers in /etc/ppp/peers had a call to the plugin passwordfd.so in their files except
So I edited /etc/ppp/peers/wvdial and placed a new line at the top:
And good friends: 3.5G Rocks ... 1.5Mb/s !!!
Re: Huawei 3G modem
Re: Huawei :3G modem
Example :- If current service provider is "A" Now i need to change Another service Provider called "B".
Re: Huawei :3G modem
Unlock huawei and other modems
Do's and Don'ts for keeping your Job
|Tags: huawei, huawei 3g modem, huawei modem, modem|
|Thread Tools||Search this Thread|
|Similar Threads for: "Huawei 3G modem"|
|Thread||Thread Starter||Forum||Replies||Last Post|
|3g modem (Huawei E173) not working with Windows 8||Chung Ae||Operating Systems||3||17-01-2014 10:00 AM|
|Getting error with Huawei 3G modem||Dinapati||Networking & Security||4||16-01-2012 07:02 PM|
|Huawei EC1260 USB modem firmware issue||Ekanga||India BroadBand||5||27-04-2010 12:05 AM|
|Connect HUAWEI ETS1201 FWT modem||Cherokee||Technology & Internet||5||24-04-2010 01:09 PM|
|HUAWEI EC168C broadband USB modem not working||Amogh||India BroadBand||8||26-10-2009 12:23 AM|