Hdmi audio enabled but image not perfect

[bini]

Last month i bought a system that have a media center with an LG HD-DVD and HDMI. The problem is that the quality when playing with my TV, HDMI picture is worse than HD-DVD's, but the audio quality is well. The picture is quite Grainy set in dark. For every suggestion I am very grateful. Thanks.

[Glenny]

I have managed to solve the problem with the image cut off temporarily. The Nvidia control panel has an option called "Resize Desktop" so you can say the graphics card, such as height and width of the screen. This works well so far, the picture is not so cut off. The only downside is that I need to adjust the desktop every time again. You need to turn off all the scaling functions, monitor, then the image output 1:1 pixel accuracy.

[JonathanD]

You need to good HDMI connectors that ensure perfect picture and sound quality - and sometimes for your problems. If you have video or sound problems, you should check first whether the HDMI connectors are firmly in the HDMI sockets. Sometimes it is enough to pull the plug from the socket and then insert. This does not help, you can find out the cause of lightning speed:The prices of HDMI cables go far apart depending on the manufacturer and supplier. is the usual length of two meters.

[Macarenas]

You need to set all cable pictures of the highest resolution of 1080p24 on Blu-ray player to TV. Player worked just as smoothly, the sound transmission from the Blu-ray to the AV receiver using DTS-HD Master Audio (new high-definition sound standard). Differences in picture and sound quality were in sight and did not stop. driven self as a practical check on the tip and the signal with a no-name cable in ten meters from the player to AV receiver headed and was from there with ten meters of television, there were no failures or perceived loss in image and sound.

[ThoMas321]

you need to check with the RCA connectors that are very common and can, the connection between CD player and amplifier to produce. They have two lines that carry the signal. The various channels are marked by the red and white plugs, and to prevent any confusion. The yellow composite input can also be marked in yellow RCA connector for video transmission are connected. In this technique, all image signals are transmitted over a single cable. For this reason, the composite input other video connections (HDMI or YUV) inferior in quality.

[MrChris-]

The problem seems somehow HDMI described to be specific. I have a 40 PFL 9704 and is also the mighty finicky HDMI connections Touching. Since one can do little about it, because HDMI has to be operated on the receiver side for 1.3 rather high cost to transfer all records safely. That means it may only high-quality HDMI cables are used (HDMI 1.3 C, Cat 2) to reduce these effects to some extent can. Then play the sequence (because of the HDMI handshake) has a key role, unfortunately. With such high-priced devices, it should not be any problems, but the magic port "HDMI" is extremely complex and as we see not necessarily the optimal.