Results 1 to 4 of 4

Thread: NetBIOS over TCPIP Disabled Cannot re-enable!!!!

  1. #1
    GTSupport, Inc. Guest

    NetBIOS over TCPIP Disabled Cannot re-enable!!!!

    I have 2 Windows 2000 server machines w/SP4 5.00.2195 both of which are set
    up as domain controllers on a multi-location site. When doing an IPCONFIG
    /ALL it shows that "NetBIOS over TCPIP is DISABLED" even tho it is set to
    [Enable NetBIOS over TCP/IP] in the network properties.

    I have checked the HKLM\SYSTEM\CCS\Services\NetBT\Paramaters\Interfaces and
    set netbiosOptions to 1, I have re-installed the NIC drivers (Intel Pro 1000
    TC), I have disabled and re-enabled NetBIOS, I have installed NetBEUI.....
    nothing works. I am unable to browse the domain, and cannot get into the
    server shares.

    I am assuming to re-install TCP/IP on the domain controller.... I have also
    run the WinSOCK fix. Any help is appreciated!

    David
    GTS, Inc.

  2. #2
    Dennis Procopio Guest

    RE: NetBIOS over TCPIP Disabled Cannot re-enable!!!!

    Are you seeing netbios disabled on both domain controllers? If so, try a
    resultant set of policy on your domain controllers to see if something is
    turned off there. If NetBeui isn't even working on your local LAN I would
    say some sort of policy is forcing NetBios to fail. Have you refreshed your
    IP configuration after making changes (it should automatically, especially
    after installing a protocol, just checking.)


    "GTSupport, Inc." wrote:

    > I have 2 Windows 2000 server machines w/SP4 5.00.2195 both of which are set
    > up as domain controllers on a multi-location site. When doing an IPCONFIG
    > /ALL it shows that "NetBIOS over TCPIP is DISABLED" even tho it is set to
    > [Enable NetBIOS over TCP/IP] in the network properties.
    >
    > I have checked the HKLM\SYSTEM\CCS\Services\NetBT\Paramaters\Interfaces and
    > set netbiosOptions to 1, I have re-installed the NIC drivers (Intel Pro 1000
    > TC), I have disabled and re-enabled NetBIOS, I have installed NetBEUI.....
    > nothing works. I am unable to browse the domain, and cannot get into the
    > server shares.
    >
    > I am assuming to re-install TCP/IP on the domain controller.... I have also
    > run the WinSOCK fix. Any help is appreciated!
    >
    > David
    > GTS, Inc.


  3. #3
    Michael Giorgio - MS MVP Guest

    Re: NetBIOS over TCPIP Disabled Cannot re-enable!!!!

    The never went out but we are leaving this morning at 3:00 AM
    to go tommorrow morning. I'll let you know how it goes.

    <GTSupport>; "Inc." <[email protected]> wrote in
    message news:
    > I have 2 Windows 2000 server machines w/SP4 5.00.2195 both of which are

    set
    > up as domain controllers on a multi-location site. When doing an IPCONFIG
    > /ALL it shows that "NetBIOS over TCPIP is DISABLED" even tho it is set to
    > [Enable NetBIOS over TCP/IP] in the network properties.
    >
    > I have checked the HKLM\SYSTEM\CCS\Services\NetBT\Paramaters\Interfaces

    and
    > set netbiosOptions to 1, I have re-installed the NIC drivers (Intel Pro

    1000
    > TC), I have disabled and re-enabled NetBIOS, I have installed NetBEUI.....
    > nothing works. I am unable to browse the domain, and cannot get into the
    > server shares.
    >
    > I am assuming to re-install TCP/IP on the domain controller.... I have

    also
    > run the WinSOCK fix. Any help is appreciated!
    >
    > David
    > GTS, Inc.




  4. #4
    Michael Giorgio - MS MVP Guest

    Re: NetBIOS over TCPIP Disabled Cannot re-enable!!!!

    Obviously this wasn't meant for this forum.
    My apologies..

    "Michael Giorgio - MS MVP" <[email protected]> wrote in
    message news:
    > The never went out but we are leaving this morning at 3:00 AM
    > to go tommorrow morning. I'll let you know how it goes.
    >>




Similar Threads

  1. How to enable a disabled iPod touch
    By FredyB in forum Portable Devices
    Replies: 17
    Last Post: 11-05-2012, 10:39 AM
  2. How do I enable my disabled itouch?
    By ArielZombyy in forum Portable Devices
    Replies: 1
    Last Post: 13-10-2011, 11:41 AM
  3. Replies: 12
    Last Post: 26-09-2011, 11:00 PM
  4. Enable some disabled function of windows..
    By Mr.Software in forum Windows Software
    Replies: 1
    Last Post: 14-05-2011, 09:55 AM
  5. How to enable Cmd which is Disabled By Administrator?
    By Juany in forum Operating Systems
    Replies: 5
    Last Post: 27-03-2010, 04:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,750,328,653.71942 seconds with 16 queries