inking not working well in the Fujitsu Q550

**@nki$achi** · 11-12-2011

As I have bought the recently Fujitsu Q550. This was my first ever tablet and was excited about this. The features of this tablet was just awesum but what I see is that the inking in the tablet is not consistent as the stylus lags when using it in the one note. So for this I would like to know is that are having the same issue regarding this as I facing through it.

**Bhadran** · 11-12-2011

I don’t see any of the issue for this as my tablet works smoothly and there is no lagging while using the onenote.

**DaminiAMD** · 11-12-2011

As I have bought the recently Fujitsu Q550. This was my first ever tablet and was excited about this. The features of this tablet was just awesum but what I see is that the inking in the tablet is not consistent as the stylus lags when using it in the one note. So for this I would like to know is that are having the same issue regarding this as I facing through it.

For this I would like to know have you tried with changing the settings in the tablet for the stylus. if not then you should try changing the settings to the “auto” and the “pen only “in the tablet and see after it whether it lags or not.

**ShaggyBoy** · 11-12-2011

Mine has the similar type of the problem, what happens is that the digitizer does not detect the screen in the tablet. And I have also noticed that digitizer works properly in some of the areas and some of the areas there is no response coming from the some part of the screen using with the digitizer. So I would like to know for this what should I do. Is there any solution from where can I fix this issue.

**Chaaruchandra** · 11-12-2011

Mine has the similar type of the problem, what happens is that the digitizer does not detect the screen in the tablet. And I have also noticed that digitizer works properly in some of the areas and some of the areas there is no response coming from the some part of the screen using with the digitizer. So I would like to know for this what should I do. Is there any solution from where can I fix this issue.

If you are facing with this issue then I must tell you that you should try doing some of the following things and see whether it works or not.

• As you getting this issue and then I must say that you should check that whether N-trig is enabled to Auto.
• As by doing this it will not get interrupted when you touch the screen.
• When you set it to auto mode the touch is disabled and until you click the screen twice by fingers it will not response to it by.
• But when you set it to the “Dual mode” it will interrupt with any touch on the screen.

**HankH** · 11-12-2011

If you are facing this issue then I must tell you that try downloading the N-trig drivers from the fujitsu and see that whether it is able to work or not. As one of my friend had the similar issue and after reinstalling the N-trig drivers was able to fix the issue.

So for this you should also try doing this, hope it gets fixed.