How to fix IO error in O!Play HD2

[Gwin]

I have just bought a revamped O!Play HD2 and there is the situation that is the situation is with the IO there are IO mistakes in O!Play HD2 and I am not ready to take care of this situation. It would be ideal if you assist em in tackling this situation. Thanking all in progressed for helping me and giving me the suggestions.

[switchblade327]

Alternatively, if you’re O!Play is connected to the network and is a pain to unplug it, if it fails I / S (or any other technical problem). You can restart the unit via telnet from your computer. Start -> Run -> cmd to execute commands -> type in the command Telnet (For example, telnet 192.168.0.103) -> at the bottom of the login type -> after that kind of connection with Windows7/Vista f restart before you must first enable the telnet command. Go to Control Panel -> Programs and Features -> click Turn Windows features on or off -> place a checkmark in the box next to Telnet Client and click OK

[BansiJ]

I suspect that you might as well attempt recently good to go updated of Firmware 2.01 for the Asus O!Play HD2 media player in your system properly. That is why you are enduring the issue. Thus, I could prescribe you to verify that you have performed the overhaul for your media player gadget in a right way. The situation is happening since the introduction of the upgrade was not finished properly, consequently ruining the whole document system noticing the Asus O!Pleay HD2 media player.

[Antonio1]

In the event that this positively is the case Asus ought to send everybody a revamped fan upon confirmation of buy and permit the warranty to blanket a self establish! Alright, then after that attempt the standby issue I´m inquisitive regarding that depending on if it works I don’t give a hoot for the warranty and do the same to mine... Since Asus don’t settle it and don’t give us underpin we need to do something to make it work enjoy it ought to!!! A debt of gratitude is in order regarding the feedback Regards

[Ceesar]

I was additionally having the situation but it solved following I updated my system to most cutting edge 2.0.2 firmware my HDD yet when it is vanished it show up when a few seconds. I reinstated first the hotness sink in addition to I construct some holes to the front precisely above the high temperature sink, now I am planning to put a fan from outside to make more stable the system. Then again now it is working fine.

[Kickapoo]

Recover all you are potentially able to with the assistance of PCI File Recovery. Then, run chkdsk /f on that drive, keeping in brain that the endeavored repair could in fact create more harm to the index system. Yet right now, I don't see too a considerable number of choices by reason of the drive might be headed out. Following it is gotten out, moreover attempt check disk /r to see provided that it will finish and if there are surface deserts in the drive.