Overclocking E7200 with P5K

[Ekpah]

while overclocking E7200 with a P5K i saw that I could easily get a 3.7g well almost but I am a beginner in this discipline and i am facing the big problem that with the vcore is on auto, no way to change i tried with bios biut i found nowhere option to make it correct . Anyone has a solution for me ????? how should I do to make the overclock properly ??
please help ...

[JAMES_911]

Same concern that overclocking on P5KPL-VM with G31 chipset. I can not find in bios where to change the voltage of the CPU or RAM. So I am limited in overclocking an E5200 to 3 Ghz (240 * 12.5). i have tried with some application but there is no use of that . Is there any way to unlock hidden features bios ? also i ask to my friends but no one knows please tell some on know

[Viceman]

The E7200 is a good processor, it is not easy to get an idea of its potential overclock but some have had good results. For a change of motherboard try to update bios because mostly while overclocking with updating bios is first step , and by updating bios may be you will get solution for your problem. normally bios is locked for armature users so with update bios they provide some more features.

[.:MUNDITO:.]

For the time you can try with this value

Advanced CPU Settings:

CPU Ratio Setting: 9.45
- C1E Support: Disable
- CPU TM function: Disable
- Vanderpool Technology: disable
- Execute Disable Bit: Disable
- Max CPUID Value Limit: Disable
- Intel (R) SpeedStep (TM) Tech. : Disable

Ai Overclock Tuner: Manual
CPU Ratio Setting: 9.5
FSB Frequency: 337 (CPU Ratio Setting x FSB Frequency: 9.5 x 337 = 3.2ghz)
FSB Strap to North Bridge: 333MHz
PCIE Frequency: 101

DRAM Frequency: the lowest (value rises along with the FSB)
DRAM Command Rate: 2T
DRAM timming Control: manual
Primary Info: 5-5-5-15-3-42-6-3 (this value is that I have in my bios it can be different, you touch it)
CAS # Latency: 5
RAS # to CAS # Delay: 5
RAS # Precharge: 5
RAS # Active Time: 15
RAS # to RAS # Delay: AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO
Secondary Info: 8-3-5-4-6-4-6 (this value is that I have in my bios it can be different, you touch it)
Read To Write Delay (S / D): AUTO
Write to Read Delay (S): AUTO
Write to Read Delay (D): AUTO
Read To Read Delay (S): AUTO
Read To Read Delay (D): AUTO
Write To Write Delay (S): AUTO
Write To Write Delay (S): AUTO
DRAM Static Read Control: AUTO
Ai Clock Twister: AUTO
Transaction Booster: AUTO

Vcore Voltage: 1.25 <== OF ME I HAVE TO to 1.29
CPU PLL Voltage: AUTO
FSB Termination Voltage: AUTO
DRAM Voltage: 2.00
North Bridge Voltage: AUTO
South Bridge Voltage: AUTO

Loadline Calibration: Enable
CPU GTL Reference: AUTO
North Bridge GTL Reference: AUTO
SB 1.5V Voltage: AUTO
CPU Spread Spectrum: disabled
PCIE Spread Spectrum: disabled


P5K/EPU AND E7200 cpu

[Bharat89]

I have the same motherboard,
Name of the motherboard Asus P5K/EPU (2 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN, IEEE-1394)

I know change the V-core with the numeric keypad, Finally when I enter I have no table opens

with the 0604 bios
System BIOS Date 06/19/08
BIOS Version 0604

[fastrod]

I have pushed my 3.17Ghz processor by testing with CPU-Z and SetFSB and pushing the FSB from 266 to 333. Moreover I have absolutely nothing else but hit the FSB in the BIOS.

I want to know how to continue to Overclock my CPU a little knowing that the Vcore is on automatic, my multiplier adjusts automatically depending on CPU usage and I adjusted the timings of my memory modules 4-4-4 -12 (initially 5-5-5-15)