Results 1 to 7 of 7

Thread: How to use Multiple Gateway in one Network Adapter

  1. #1
    Join Date
    Mar 2011
    Posts
    155

    How to use Multiple Gateway in one Network Adapter

    I own two gateway in excess of my network provider in order to connect to internet. They are Gateway1="1.1.1.2" as well as Gateway2 = "1.1.1.3". However i have barely single network adapter with single wire. i would like to utilize for instance employ "1.1.1.2" intended for my downloading and utilize "1.1.1.3" intended for my WEB surfing. Currently i am looking for a program to construct "Virtual Network adapter" allocated to my actual network adapter to set 2nd Gateway to it and utilize with that program. Is it possible? My system is right now running with Windows XP service pack 3.

  2. #2
    Join Date
    Feb 2010
    Posts
    530

    Re: How to use Multiple Gateway in one Network Adapter

    If you only have one internet connection (DSL, Cable otherwise Satellite connection) it will not going to make any distinction if you have 2 network cards installed in your computer. What you have scheduled as far as this, it sounds sort of similar to a Y splitter on top of a garden pipe. It is not possible for you to download t2 times as much information from the similar pipe since a PC with only one network adapter, that's manner it functions. The Y splitter does not twofold your internet pace, except it cuts it into half otherwise splits it among those network adapters.

  3. #3
    Join Date
    Feb 2010
    Posts
    533

    Re: How to use Multiple Gateway in one Network Adapter

    I do not make out if this a different issue except what i have is a cable internet connection at my home that goes from modem toward router and afterward toward two computers. I also need to bypass router and make use of single cat5 splitter set out straight toward computers from cat5 splitter. However by seeing this blueprint what I have understood is, the router is slowing downward my internet speed. I don’t know what is wrong with this set up and still I am not to find out the solution.

  4. #4
    Join Date
    Feb 2010
    Posts
    678

    Re: How to use Multiple Gateway in one Network Adapter

    AS far as I know that the cat5 splitter will carry out one of 2 things-
    • It will build your internet extremely slow for the reason that 2 systems are chatting on what they imagine are 2 dissimilar network connections and there will be numerous Tx(transmit) impacts indicating they will hang around as regards .4ms prior to transmitting/requesting packet over again.
    • Otherwise you will not obtain internet access in any way for the reason that the cable modem is not elegant as much as necessary to recognize while it's connected to a fresh MAC address (Media Access Control)

  5. #5
    Join Date
    Feb 2010
    Posts
    532

    Re: How to use Multiple Gateway in one Network Adapter

    I’m worried that perhaps these are just 2 gateways served by means of the equal modem. And if true, there's an excellent possibility you won't obtain extra bandwidth whether you utilize one, the further, otherwise together. In favor of each modem, you typically obtain a utmost bandwidth, in spite of how that's divided up (single public IP, numerous public IPs, single gateway, 2 gateways, and so on.). The barely moment I've seen extra bandwidth is while each gateway is serving a dissimilar modem. The truth you're utilizing simply one network adapter at the client recommend it's just single modem, or besides you'd need to be employing a dual-WAN router, single Wan for each modem.

  6. #6
    Join Date
    Feb 2010
    Posts
    638

    Re: How to use Multiple Gateway in one Network Adapter

    Each PC wants an IP address to operate on top of the internet, whether Private otherwise Public. 192.168.1. X is the most ordinary one you'll notice while utilizing a wireless router. Public IP addresses typically are similar to this- 12.23.345.56 otherwise still 123.45.67.89. A solitary public IP has been allocated toward your cable modem, it merely has that IP address indicating it's merely excellent in support of a lone PC. I hope that it make some sense for your issue and what you are looking for.

  7. #7
    Join Date
    Feb 2010
    Posts
    570

    Re: How to use Multiple Gateway in one Network Adapter

    Barely a single gateway is utilized for each and every one of destinations that are not situated on top of the subnet, still while you configure numerous default gateways. An instance of this is while a PC is connected in the direction of together an intranet through various subnets and the Internet. By means of a default gateway configured intended for together adapters, you can moreover communicate with each and every one of computers lying on the Internet otherwise each and every one computers on top of the intranet, except not together.

Similar Threads

  1. Gateway NV5378u Laptop Power Adapter Beep
    By Leiff in forum Portable Devices
    Replies: 10
    Last Post: 18-09-2012, 06:17 PM
  2. Replies: 9
    Last Post: 03-01-2012, 08:11 PM
  3. Multiple Network Adapter's in Windows Vista
    By Bollea in forum Vista Help
    Replies: 5
    Last Post: 28-11-2011, 04:23 PM
  4. Windows 7 : Default Gateway will not save on any network adapter
    By Elizabeth%allen in forum Networking & Security
    Replies: 5
    Last Post: 17-01-2011, 07:23 PM
  5. Replies: 4
    Last Post: 14-01-2011, 07:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,749,949,823.29538 seconds with 16 queries