Results 1 to 7 of 7

Thread: No Data, how to find WEP

  1. #1
    Join Date
    Apr 2010
    Posts
    80

    No Data, how to find WEP

    Hi all,

    I am using Linux operating system and using internet on it. Actually the issue is that when i open my HTTPS site on my portal it need WEP Keys, and find no data on my portal. So I want to know that how to find the WEP. Please suggest. Thanks in advance.

  2. #2
    Join Date
    Feb 2008
    Posts
    2,635

    No Data, how to find WEP

    You need to connect to the Internet.
    1. Type in your address bar 192. 168. 1. 1 or 192. 168. 0. 1. . Some routers may have a similar default IP 10. 0. 0. 1. Check your router manual or Google to find your routers default IP if necessary.
    2. You may be prompted for a password. The default user name and password - user name: admin and password: admin or password. You should now set the screen for your router. Go wireless tag (or wireless settings), you should see your WEP key.
    3.The COM. In the search box enter "key site." And then scroll down to "wirelesswepkeyview 1.16 ", click it. Click Download. Download, right click and select Extract. To open the file, then click the picture, there is a critical. Then, you will see all the nearby wireless networks and WEP key for your modem.

  3. #3
    Join Date
    May 2008
    Posts
    2,945

    No Data, how to find WEP

    WEP encryption can be said that the most basic wireless encryption, many users are configured through his wireless device to improve safety. We can open the WEP encryption for wireless device features, and then select the encryption is encrypted median length, the shortest was 64, we can enter a 10-bit cipher text, such as 1111111111. Enter WEP encryption turned cipher text only know the cipher text wireless NetCard can connect to our set up WEP encryption for wireless devices.

  4. #4
    Join Date
    Jan 2006
    Posts
    3,792

    No Data, how to find WEP

    WEP uses symmetric encryption mechanisms, data encryption and decryption use the same key and encryption algorithm. Use WEP encryption key (also known as WEP key) encryption on 802.11 networks to exchange data in each packet departments. Enabled encryption, the two 802.11 devices to communicate with the same encryption key required, and are configured to use encryption. If the configuration of a device and another device without the use of encryption, even if the two devices have the same encryption key can not be communication.

  5. #5
    Join Date
    Jan 2006
    Posts
    4,221

    No Data, how to find WEP

    Security mechanism, encryption decryption of data frame encryption process is simple negation. WEP Decryption process is as follows.
    (1) Restoration of the initial plaintext. Re-generate the key stream to and receive information to the ciphertext XOR, to restore the original plaintext message.
    (2) calibration and maintenance. The receiver to restore the plaintext information under maintenance check and will restore the plaintext information separation, re-calculate the checksum and check it with the received checksum match. This will ensure that only accurate data frame checksum and the receiver will be accepted.

  6. #6
    Join Date
    Feb 2010
    Posts
    154

    No Data, how to find WEP

    It is mainly used in wireless LAN data link layer information confidential. WEP uses symmetric encryption mechanisms, data encryption and decryption use the same key and encryption algorithm. Use WEP encryption key (also known as WEP key) encryption on 802.11 networks to exchange data in each packet departments. Enabled encryption, the two 802.11 devices to communicate with the same encryption key required, and are configured to use encryption. If the configuration of a device and another device without the use of encryption, even if the two devices have the same encryption key can not be communication.

  7. #7
    Join Date
    Feb 2010
    Posts
    428

    No Data, how to find WEP

    The address is nothing more than general 192.168.1.1 or .0.1You look at the route the following product serial number of the class. To crack a 64bit WEP in 5 minutes of time to run the replay attack by a few manipulation of time consisting of: scanning with airodump, aireplay with aircrack crack and the use of network traffic generated, nothing more than a place where a lot of luck Sometimes, a 64bit crack the WEP key to collect about 25,000 IV, then it takes even longer time. Try this you need to recover the length of WEP key input to the Aircrack, this length is not a tool which can provide for your own test environment, WLAN, of course to know this information, but in the other you have no heard of network environment, you can use 64 or 128 to try the two key length.

Similar Threads

  1. How to find percentage of columns data in Excel
    By Kungfu Pandey in forum Windows Software
    Replies: 2
    Last Post: 07-01-2012, 06:20 PM
  2. Unable to find Data Counter in Nokia N8
    By Eyvindur in forum Portable Devices
    Replies: 4
    Last Post: 08-01-2011, 10:15 AM
  3. Find data in a string
    By New ID in forum Software Development
    Replies: 5
    Last Post: 17-02-2010, 04:05 AM
  4. How to Use Excel filtering to find data quickly
    By manishdk in forum Guides & Tutorials
    Replies: 1
    Last Post: 31-12-2009, 01:18 PM
  5. Vista, where to find: \USER\Application Data
    By Gobind in forum Operating Systems
    Replies: 3
    Last Post: 06-11-2009, 10:23 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,751,264,642.36317 seconds with 16 queries