Corsair RAM not running on Asus P7P55D EVO Motherboard

[Yogus_X]

I am using the Windows 7 operating system on my system and the performance was very good in my computer but from last night it created a number of the problems and provided a beep at the start up, i though that it was a RAM problem and replaced the RAM with a new one of Corsair. I plugged in the RAM and restarted the computer but it failed to start in the BIOS mode and in the normal way. So, what is the problem in the RAM or in the system and how i can resolve these issue any suggestion on the topic will be appreciated to resolve the problem.

[Amd Athlon]

The problem that you have mentioned occurs due to a number of the reasons so first you tell me the proper system configuration that you are using in the computer and the exact issue of the RAM or the system that you are facing. These details will help me to understand the problem in an appropriate manner and i will be able to provide the solution in a suitable way to you.

[Yogus_X]

I am using the Windows 7 operating system in the Intel Corei7 870 processor along with the Asus P7P55D EVO Motherboard.In addition to that it had a RAM of Corsair Twin3X4096-1333C9DHX which is two in number. The problem is that when i try to start the system with one RAM it is working fine but when both of the RAM of 4 GB (4 GBx2048) are plugged in and the system is started it creates a number of the problem in the system and the system does not start up, so any recommendation on the topic will be appreciated t resolve the problem.

[PeterAGASSI]

The first thing that you should kept in mind is that make sure that the RAM DIMMs (dual inline memory modules) are set up correctly and are not the reason of your trouble because if the RAM’s are not installed properly the system never going to start in a proper way. In addition to that modify the arrange order of the installed DIMMs (dual inline memory modules). First you need to insert the first set of RAM and try to start the system if not started then insert the same RAM in the other slot and repeat the process and similarly you can try the process with the other RAM and if they both are not working then there is a problem in the RAM that you are using or there is a problem in the RAM slot available on the Asus P7P55D EVO Motherboard. So, in order to resolve these issue you need to check the both the Corsair RAM on other Motherboard of the similar kind and id they are working fine then there is not a problem in the RAM and if they don’t work properly there then there is a problem in the Motherboard that you need to fix.

[Joshua]

The other way to troubleshoot the RAM is that take away all but the minimum number of DIMMs needed to run the any of the Microsoft application, and check to see if the difficulty persists. If it does, substitute the DIMMs you detached and eliminate the others, testing again to observe if the problem persists. If it doesn't, then one or additional of the detached DIMMs are the reason. For help, contact the RAM DIMM manufacturer for further help and support on the given topic, this will resolve your problem for sure.

[Russell]

There are a number of the tools available in the market by which you can come to know that the RAM is working or not such as the Windows Memory Diagnostic test. The Windows Memory Diagnostic inspects the Random Access Memory (RAM) on your computer for faults. The diagnostic comprises of a complete set of memory tests. If you understand the problems while running Windows, you can utilize the diagnostic to decide whether the problems are caused by failing hardware, such as RAM or the memory scheme of your motherboard. Windows Memory Diagnostic is intended to be simple and quick. On the majority configurations, you can download the diagnostic, interpret the documentation, run the examination and complete the first test pass in less than 20 minutes, this is the very effective way to get the issue fixed. So, you need to just download the application and installed it to get the problem of the RAM that you are facing.

[MattyBoy]

Make sure that the memory components in your system are well-matched with the chip set on your systems main board. For more details about how to insert that you need to see to the documents that where given with the chipset. After that you need to follow the given process as first you need to go in the computer option and then in the Properties >> advanced tab and under the Performance select the settings options. Then in beneath the Virtual Memory select the change option followed by the No paging file and then you need to select the OK button. After that restart the Computer and then repeat the same process till you go to the Virtual memory and then select the System Managed Sized and finally you need to select the OK option to complete the process then restart the system to see that all the changes has taken place or not.