Strange Trouble with Intel D102 Motherboard

[Dharamsi]

i have am having strange trouble with my intel motherboard. I have an original Intel d102 motherboard. I had problems with IDE hard drive failure so i bought a SATA hard drive. I also tried connecting the sata hdd to one of the 4 available SATA port on the intel motherboard and tried installing Windows XP professional SP 2 as an operating system on to this new sata hard drive. It started fine but after sometime, the installation got aborted after 75% installation, with an error code:

STOP:0X00000050 (0XF7A0900C, 0X00000000, 0X805CD6C5, 0X00000000)
atiide2k.sys- address F7A0900C base at F7AO8OOO, Datestamp 40bf6f34

Please provide some replies regarding this problem

Your reply will be appreciated

[Amd Athlon]

This issue occurs because a request from the client (SMB Move) is not handled correctly.

Updates and fixes to Microsoft Windows 2000 are distributed in service packs. Service packs keep the product current. Service packs include updates, system administration tools, drivers, and additional components that are conveniently bundled for easy downloading. Service packs are cumulative. Therefore, each new service pack contains all the fixes that are included in previous service packs together with the new fixes. You do not have to install a previous service pack before you install the latest service pack. For example, you do not have to install Windows 2000 Service Pack 3 (SP3) before you install Windows 2000 Service Pack 4 (SP4).

[gygabite]

1. Start Windows in Safe mode. To do so:Restart the computer, and then press F8 while the computer starts.
2. On the Windows Advanced Options Menu that appears, use the ARROW keys to select Safe Mode, and then press ENTER.
3. Use the ARROW keys to select the operating system to start, and then press ENTER to start Windows XP in Safe mode.
4. Restart the computer, and then press F8 while the computer starts.
5. On the Windows Advanced Options Menu that appears, use the ARROW keys to select Safe Mode, and then press ENTER.
6. Use the ARROW keys to select the operating system to start, and then press ENTER to start Windows XP in Safe mode.
7. In the message that states that Windows is running in Safe mode, click Yes.
8. Click Start, click Run, type msinfo32 in the Open box, and then click OK.
9. Under System Summary, expand Components, and then click Display.
10. In the right pane, note the information that corresponds to the INF File item, for example, Nv4.inf, Oem0.inf, or Atim128.inf.
11. Quit the System Information utility.
12. Click Start, right-click My Computer, and then click Properties.
13. Click the Hardware tab, and then click Device Manager.
14. Expand Display adapters, right-click the display adapter, and then click Uninstall.
15. Click OK.
16. Click Start, click Run, type cmd, and then click OK.

In the Command Prompt window, type the following commands, and then press ENTER after each line:
ren %systemroot%\inf\INF file name from Step 5.inf *inf.old
ren %systemroot%\inf\INF file name from Step 5.pnf *pnf.old
Close all open windows, and then restart the computer in the typical manner.
Log on to Windows by using an account that has administrative privileges, and then wait for Windows to detect new hardware.
When the Found New Hardware Wizard starts, click Cancel.

If you receive a stop error after you remove the updated display drivers, restart the computer and use the Last Known Good Configuration option. To do this, restart the computer, and then press the F8 key while the computer starts. On the Windows Advanced Options Menu that appears, use the ARROW keys to select Last Known Good Configuration, and then press ENTER.

[Joshua]

All your errors are 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

As you can tell the definition for this error is quite broad. For clarification purposes, the only two things you can think of that has changed are updates to Windows and AVG, correct?

Second, were you getting any BSODs prior to these updates?

We have seen a lot of issues here concerning AVG. Our recommendation to many is to not just disable it but completely uninstall it and to do so thoroughly one must use AVG's removal tool which you can access from their website.

[Russell]

Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

• First Turn of Automatic Restart on system Failure.
  
• To do that go to Start > Run > type in sysdm.cpl
• Go to Advanced > under startup and recovery click on settings > under system Failure uncheck automatically restart.
  
• Go to start go to run type in Verifier.exe.
  
• Select Create Custom Settings >> press next >> Select Select individual Settings from a full list>> press next >> put a check mark next to everything besides Low resources simulation>> Press next >> Select Select driver name from a list>> press next>> Find drivers associated with the anti virus put a check mark next to them(you can do this by sorting by company name and then putting a check mark next to everything that has the Anti Virus Company Name next to them)>> click on finish >> Restart Computer
  
• Do you get a Blue Screen error message? If you did we found the culprit. If not We will have to try something else.
  
• Ok now that that is done If you get the Blue Screen error message you will continue to get it on restart until you clear the settings in the drive verifier.
  
• To clear the settings Boot the computer into safe mode by turning on the computer and pressing F8.
  
• When you get the advanced Options Menu use the up down arrow keys to Select Safe mode.
  
• When Safe Mode comes up.
  
• Go to start > run > type in Verifier.exe
• Select Delete Existing Settings>> click Finish> confirm and restart.