Corsair H80 required installation guide?

[Gundugollu]

hi when i having this Corsair H80 i completely installed. so after then when i just see that if i connect the fans to the pump or to the fan controller on CPU fan slot on motherboard that i am thinking that molex connecter is only for the pump so please help me for the installation of Corsair H80 and i appreciate for your help.

[Chahel]

yeah it might be correct that for the installation of the corsair h80. just you want to install on the pump at the full speed, so just hook it on the motherboard that you can be connect the fans controller on the motherboards that if you might be want

[Lisa Boney]

when i am just installed my new h80. that both the fans are connected directly to the pump for the speed increase so i need a clear information about the connection so where i connect this h80 fans which i don't get any good solution. i don't recieve any of the issue after the installation so i think that you can connect the fans only for the fans controller that which it can be pass the connector on the pump so might be you get the advantages to control the temp features only on the pump unit.

[Naq]

it is not so difficult to setup the h80 fans on your computer when my friend having fans issue they i am seem that it is not difficult to install so they install h50 on their PC and it seem that 3-4 degrees cooler that which i can be loaded but on my h80 i am just doing the installation around more then 1 hrs only for the fitting

[Tritanic]

do you know that h80 have a temp controller unit? that must check the speed of the fans. because when i want to check that test of the h80 was have doesn't install correctly on my CPU and also the pump not running with a correct rpm that which i should be run around max 2100 so until so that not be heating of the CPU so how much that rpm must be have on the h80 that should be pump at max?

[Roey]

the fans speed is controlled according to the selected of the unit, so the speed of the h80 is around or it can be high or low according to the uses. that only when the fans will be plugged in to the pump itself. the speed is based on the speed range of the profile on coolant temperature for the pump. which the pump must itself have the 100% have the speed of the fans so that i cannot able to change according to the temperature.

[Mayoor]

while i got a machine which i already attached the h80 fans on it so which fans does have come with and attached the fans on the motherboards so like it is working great that when i am using the PC whole day and also don't have any AC on my room then also PC doesn't have any of the issue and it not get heated. so which i just received the installation guide which that they don't send me but i got it so i need to conform that it is correct or not which i
want to make sure that it is correctly installed. so that fans are plugged into the power splitter of the CPU block.

[DawnSet]

how can i installed correctly which i get the better speed and also don't have to face any of the issue in between that which you can control the speed only with a one little wire that which comes up with power molar is to be plugged into the CPU fan on the fan that have back unit which it will the air blow out and only the one inside case that blowing through out the radiator that i think it will be correct

[Pinlunk]

this might the case you get the big issue if you don't take the correct step for the installation when the corsair installation guide with the help of the diagram that will be that how does the fans will be intake. so think that is the issue about the preference of the individual case setup. that you might be have an idea about that if your fans setup as intake instead of exchast that there might be have change on the temp only on the some cases

[Yistor]

whenever you like to change the setting you may be select the fans setting 1,2,3 which so it might not see any fast movement on the fans so for that i think you must to keep the temp level. if you have more loaded gaming on your PC so it might be get more CPU loaded where the controller will be increase the speed of the fans it come to the level 3 mode only which it will be increase the fans speed. so all depend on the CPU temperature.

[PuffDuff]

so can anyone tell me what is the correct way to plug this h80 in motherboard? which i still unable to find it.right now having 2 fans that will be plugged and through via pump and with a molex to psu. so that is working fine but still so this is correct yeah i want to take some another step for this so appreciate for your recommend?