Results 1 to 7 of 7

Thread: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

  1. #1
    Join Date
    Jul 2011
    Posts
    1,484

    Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Hello friend I am having a problem with the updation of the Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 actually this dint created a problem but the problem started when the disconnect and reconnect the power cable and that time it showed something like it is successfully installed and I don’t know anything about that and can anyone tell me that what should I do to know that it is successfully loaded or not? The second thing I want to know is can I replace it with any other flashed Liteon 7485 please help me for this I am waiting? And the last thing is it possible to spoof the Samsung into a Liteon 7485

  2. #2
    Join Date
    Aug 2008
    Posts
    1,238

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Hello friend I would like to say that if you have got the lite_cfw and if it is having a drive key been associated with it then I think you can know that everything is fine, but I would be also saying that in the whole process would be going up with the tits up then I think you would have corrupted the drive key. And talking about the spoofing thing I would be saying that a Sammy as a liteon would be possible and you need to be sure with that you had a correct drive key that is the must to know and I think it would be something like which is associated with the lite_cfw.bin just try out hopefully my comment would be helping you.

  3. #3
    Join Date
    May 2009
    Posts
    640

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Well I would like to start with that the liteon drives have been damn robust and I have never had any failed attempt and then I would ask you to try flashing and it all over once again and see that is it working or not. And I don’t think you have messed up everything I think all is fine. Now I would be saying that the Lite_CFW.bin should contain your key check it out. Now the next thing is if you want to play the XBL I would be asking you to load the CFW as the target and then get a new liteon drive which would be spoofing with the CFW. And I think this would surely help you out.

  4. #4
    Join Date
    Nov 2009
    Posts
    1,002

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Ok guys so what I have thought over it are when you would have been reconnecting your drive again having you saw any golden key? And which must have said verified? And if you have got anything like this then I think the key database has bene going to the firmware 32 tab and then right click has been in the space which it would be saying that the source firmware is hit open to the key database and I hope that you would find your key from the flash and when that key is loaded then you can do anything.

  5. #5
    Join Date
    Nov 2009
    Posts
    866

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Hello friend I would ask you to go through some of the steps and they would be start the jungle flasher first then the power drive with the refresh port now you need to go to the firmware 32 and load the lite.CWF as the source and load the key from the key database which would be done by pressing the dummy from the key database and the third step is to loat it and plus the firmware as the target and then spoof the source target and now the fourth and the last step would be connect to your new drive and then the liteon erase then write then outro and I am sure your problem would be solved.

  6. #6
    Join Date
    May 2009
    Posts
    1,191

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Hello friend I know that these solutions have been perfect and once when you are done with all of them you would be able to carry lots of process, and something what I would be letting you know about it is you would be restoring your drive to the stock and then you can reflash it and then save the files. And the next thing which I would be saying is that tyou can spoof the new drive and I recommend that you do this by reading the JF tutorial and they would be helping you by saying how to do all this.

  7. #7
    Join Date
    Jul 2011
    Posts
    1,484

    Re: Updating Liteon PLDS DG-16D2S rev: 7485 with Jungle Flasher 1.76 created problem

    Hey guys thanks a lot for a nice discussion and i am happy to get so many guys trying to help me out and i am very happy because i dint expected so many of you to come up over this topic anyway this was an interesting and very useful comments and very helpful thanks once again and hope you would keep participating in this always. your help was really needed and you helped me on time so I am very thank full and I have been expecting your help with tough solution in future also so keep going on with me.

Similar Threads

  1. NAND Flasher 360 for XBOX 360 and Windows
    By Chini mao in forum Video Games
    Replies: 5
    Last Post: 06-01-2012, 11:54 AM
  2. Jungle Flasher won't detect com3 port
    By Kim|ball in forum Windows Software
    Replies: 5
    Last Post: 26-06-2011, 10:15 AM
  3. Trojan horse created problem
    By AxelF in forum Networking & Security
    Replies: 4
    Last Post: 01-03-2011, 07:51 AM
  4. How to flash Hitachi drive with jungle flasher
    By John mitchell in forum Windows Software
    Replies: 3
    Last Post: 15-05-2009, 03:42 PM
  5. Replies: 2
    Last Post: 07-10-2008, 05:40 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,750,195,371.62746 seconds with 16 queries