Sata is not recognized by windows 7 OS

[Grieg]

Hi, after 2 days of thinking I have given up ego for now. Board of ASUS A7N8X-E mit AMD 3200+ Board is ASUS A7N8X-E with AMD 3200 + XP is installed on 30 GB Samsung SATA Dvd boat loaded win 7 and started win7 find the sata drive and wants the driver. So googled and sata drivers for the board gesucht.Hab also found something at ASUS, but that is 30 MB? Ok, on a USB packaged and win 7 restarted on DVD. USB stick has identified win 7 but no drivers for the drive. I've been looking after me wolf eien right sata driver Formatting the drive I can not neither in XP nor under windows 7. XP starts normally from the sata drive but dance music while also not because I've formatted the low Lavel win7 menu. Manure that only partition can be formatted 1) Sata drive has two partitions c + d Well of course does nothing more. Does anyone have any idea how I get down again? Or a link where I failed this. Drivers get?

[Abhibhava]

Ok, I have drivers, only win 7, the diskette nicht.win 7, I would think the first diskette formatiieren .. ok, then format and just pressed ok no means win7 format I cannot and do not read.Win 7 and cannot be installed so the old xp version also will not boot no problem! Then just play again and the new xp driver disc with the txt setup smashed xp disc is loaded and run from CD. Then install drivers from third-party and already uses the disk to it and then comes: An error has occurred in the txt setup ups but no problem driver loaded down again directly from the ASUS download page and again the same error. And now?

[Balamani]

Have you taken sometimes ne another disk? Alternatively, you can adjust the BIOS IDE and, after installation of Windows 7 back to AHCI. The description and follow links to the descriptions of the same. And in this if you want more information regarding this then you just visit the Windows 7 retrospectively from Native IDE to AHCI site. I think you will get all your problems solution.

[Apple.Mac.Rocker]

I have read all the post which is given here and after reading the previous post I have tried this and visited that site. And here I just want to thank you. But in this the solution which I get is it works on the computer no longer winxp and an IDE drive I have in there either. Strange that the BIOS boot at the Sataplatte recognize? Ah yes, the 4 GB USB Stik when I try to install win 7 somehow shot is not detected all the data gone? Or can you revive the thing?

[Sn0w-Le0p@rD]

And here I do not want to express myself in a wrong way. Actually in this It does not matter whether you have IDE disk installed one, but the reason you win 7 to the SATA drive in IDE mode (BIOS) "Win 7 drive recognizes it as an IDE" install and after successful installation according to the instructions above for the Reset the BIOS to AHCI. "boot from other devices" oder "third, fourth device" , "Boot from other devices" or "third, fourth device", then you should, it can set. Of course there are tens of BIOS versions and the manual for your board, I would first invite, so I'll show you right now even my bios settings you have but adders with certainty.