Can't connect Logitech diNovo Mini to PS3

[Rishab]

I just purchased Logitech diNovo Mini keyboard for the HTPC and I'm realizing that I hang up the PS3. it is the same case ith my PCIf I remove the Bluetooth USB and PS2 keyboard and mouse connect the computer operates normally, but is to reconnect the diNovo and within minutes my PC freezes. The operating system is Windows 7 x64, I tested with the drivers that come on the disc, downloaded the latest drivers from Logitech and without, in all cases it hangs, sometimes it just freezes and sometimes I even corrupts graphics screen. Can't connect Logitech diNovo Mini to PS3

[Hardwareman]

I think it has something to do with USB ports, it depends on the port in which the place most likely to hang. Try connecting it via USB WiFi adapter, the Bluetooth that came with the diNovo and an external HD. Most probably the problem should be solved by the above solution but anyways if you are not able to get rid of this situation. I would suggest you to roll back the existing drivers from your system and then install some new drivers if possible try downloading it from the logitech website only.

[Maxforu]

This may be because your motherboard has some jumpers to put 5VSB USB mode, I think this is used to power the USB even with the computer off, which would turn the computer from the keyboard and load devices, almost certainly if you are not available to get rid of this situation even after trying this. then there is definitely some problem with the Logitech diNovo Mini keyboard if not since it appears as your Logitech diNovo Mini is still in the warranty period. Such to the nearest logitech service center to get it repaired.

[lorenz]

since I have it within a month and I do not hang up the computer but every time I turn I get error of the process that controls the diNovo and I have to accept him to shut down manually and makes a nuisance (in especially when someone else uses it) because you have to keep pressing alt + tab or minimize the media center and give it to accept having to change how the mouse cursor every time I turn it off

[Camillee]

I think the crashes are caused by the combination of Dinova Bluetooth adapter and wireless USB Adapter SMC. If I put both the two crashes, one of the two removed is well. I'll see if any new driver for the wifi works for me. The ruling gives you you I would try to put the Logitech Setpoint v4.80, which come on the CD are older.

[Praetor]

I tried to put the official SMC drivers, and Windows 7 tells me that the driver is not certified and go to the manufacturer's website (if I have fallen from me there). Ruled that the only thing I can think of is to use another Bluetooth adapter as I can and will match the remote and the PS3 pad, bluetooth Dinova because I think it just goes with the keyboard.

[Deep23]

I solved by disconnecting and reconnecting usb, but I wish someone told me if you have a solution. I have it on a Asrock ION-DB 330HT Windows 7 x64 and I'm not biggest problem when I take a long time using it, the touchpad is as insensitive and no one can operate the cursor. Recovered by closing the lid and reopening.