Adaptec 2610SA Controller Card

[Character]

Hi all,

I am using dell desktop machine. I am looking for Adaptec 2610SA Controller card. I already bought one on amazon, but had no luck finding support information on it. How can i use this on my dell desktop computers. Please suggest.

[Fabian]

I will give you the technical details of the Adaptec Serial ATA RAID 2610SA
# It is a 6-port Serial ATA RAID controller
# It supports Adaptec's advanced feature set, counting Optimized Disk Utilization, Online Capacity Expansion and RAID Level Migration
# It supports SATA 2 features as well as enclosure management and backplanes
# 64 MB of set ECC SDRAM cache memory.
# The operating system support contain Windows Server 2003, Windows XP, Windows 2000, NetWare 6.5, RedHat Linux and SuSE Linux, SCO UnixWare and Caldera Open UNIX.

[RoninBlade]

You got the device driver install cd for the Adaptec AAR 1210SA SATA HostRAID Controller. This will be the same or very like to the CD that would have been complete for your Adaptec AAR 1210SA SATA HostRAID Controller. These drivers are complete in a special windows friendly format this means that your PC or Laptop will routinely install the Silicon Adaptec AAR 1210SA SATA HostRAID Controller Windows XP driver with barely any user interaction. If you have installed a new windows operating system and half of your Silicon drivers just won’t work then this is exactly what you require.

[deoWo]

A driver typically communicates with the device through the computer bus or communications subsystem to which the hardware connects. The driver issues commands to the device. Once the device sends data back to the driver, the driver may invoke routines in the original calling program. The device ID string for the Silicon Adaptec AAR 1210SA SATA HostRAID Controller is:
PCI\VEN_1095&DEV_0240&...
So if your missing the Windows XP driver CD for your Silicon Adaptec AAR 1210SA SATA HostRAID Controller then it is available via download here.

[Rawko]

You need to test Silicon Adaptec AAR 1210SA SATA HostRAID Controller . You can repair and service your system with restore disk or recovery disk from website. If your laptop or PC won’t boot or start up then you will have a utility to re-boot or re-install your system. If your system is companionable it will give you the choice to create your possess vista recovery migration CD. You can find Silicon Adaptec AAR 1210SA SATA HostRAID Controller Windows XP Device 669171 technical specs and specifications with lots of help and information. Best of luck.

[Killen]

Does your laptop or desktop computer beep when you turn it on? In order on beep codes bleeps on booting, boot codes led flashing flashes 1 2 3 4 5 once twice three times on and off times on boot. Power on self test fail, boot failure. Check and reply.

[Killen]

You need to install the drivers for it. Check the steps to load the drivers:
1.Define your Adaptec PCI device model.
2.Define your operating system to install your Adaptec PCI device.
3.Browse PCI Drivers.
4.Find Adaptec PCI Drivers.
5.Choose Adaptec SATA RAID 2610SA Controller.
6.Download Adaptec SATA RAID 2610SA Controller.
7.Install Adaptec SATA RAID 2610SA Controller.
8 Restart or reboot your computer to finish your driver installation.

[voodoo1226]

You need to install the drivers for it. Check the steps to load the drivers:
1.Define your Adaptec PCI device model.
2.Define your operating system to install your Adaptec PCI device.
3.Browse PCI Drivers.
4.Find Adaptec PCI Drivers.
5.Choose Adaptec SATA RAID 2610SA Controller.
6.Download Adaptec SATA RAID 2610SA Controller.
7.Install Adaptec SATA RAID 2610SA Controller.
8 Restart or reboot your computer to finish your driver installation.

Hi,

Do you know where to dl the driver, or which driver is compatible? I have the DELL(Adaptec card on Dell machine?) CERC SATA 1.5/6ch v4.1.0.7403, and Windows 7 64 bit. None of drivers at Dell website seems to work. Your step 3 above, where can I browse for the PCI drivers?

Thanks.