Xbox 360 wireless headset not working

[Custidio]

Hi,

I recently bought a Wireless Headset. The problem is that Xbox 360 wireless headset is not working. I mean to say, I am unable to hear the voice from my headset. It has been recognized by scanning and bluetooth settings in the menus I get a test microphone, Should I have to change the settings or something, so that it can work properly ??

[Seraphim]

You need clean the Xbox hardware. To do this, follow these steps:

• Examine the headset, the cord and the connector for visible defects.
• Check that no dirt on the connector from the Xbox 360 Headset is. Use a cotton swab dipped in rubbing alcohol to clean the connector.
• Use a cotton swab dipped in rubbing alcohol to clean the connector.
• Verify that the Xbox 360 Controller operates correctly. Verify that you can use the controller to the console on and off.
• Verify that you can use the controller to the console on and off.
• Plug the connector from the Xbox 360 headset firmly into the expansion port under the directional pad (D-pad) and the right stick on the controller.
• If the problem is not resolved

[Samra]

The headset can only properly be used as the headset and microphone are placed on the right position. Keep the headset over the top of your head. Make sure the microphone approximately 2.5 cm away from your mouth and slightly to the side is placed. That way you prevent your breath during a conversation can be heard. If you adjust the microphone, make sure that the opening of the microphone to your mouth and not directed outwards.

[Simpson]

First make sure that the battery is well charged. Hold down the console and remove the wireless headset at least three feet from large metal objects like filing cabinets or refrigerators. Remove decorations from the console and the wireless headset, and then try to reconnect. Metals decorations, stickers or front panels on the console or the wireless headset can affect the performance of the wireless headsets.

[Salome]

Make sure that the front of the console in the direction of the wireless headsets points and is not directed at the walls in the vicinity.
If you connect four wireless controllers to your console, you need to disconnect one of them from the console, so you can connect a wireless headset. To disconnect a wireless controller from the console, press and hold the Xbox Guide button for three seconds long. Turn on the wireless controller from then. To turn off a wireless controller, remove the cable from the console.

[DllD]

Check if the adapter is connected to the wireless headset and the battery is not charged, you may receive an error message. In this case, the first two lights flashing on the wireless headset repeated in the following order: light 1, Light 1 and then 2nd light . When this phenomenon occurs, the wireless headset may be too warm or too cold. Leave the wireless headset connected to the power supply until the temperature has changed. After the change of temperature, the battery should be recharged.