Windows 7 winfast dtv2000h won't work

**Firon** · 08-12-2009

I am trying to connect my pc with TV. I have installed tv tuner card on my motherboard and checked connection two three times but still it is not working. MY windows 7 computer wont work winfast dtv2000h card. I have updated all the necessary driver but still no fix...

**deoWo** · 08-12-2009

I am assuming that your winfast dtv2000h TV tuner card outputs the audio through a connector to the Line In connector of your sound card . Go to Control Panel > Sound > in Recording Tab, look for Line-in. Select it, click Properties, go to the Listen Tab, and enable Listen this device. Accept and try again. If that doesn't work, then you need to reinstall the card.

**RoninBlade** · 08-12-2009

I think the problem is that your winfast dtv2000h TV Tuner card driver does not support windows 7. Try to find a driver for your tuner which is for media center edition. Is the tuner bundled with your pc? if not then you should buy a tuner which is win media center compatible.

**Rawko** · 08-12-2009

Have you checked that the card is firmly in place try removing it from the motherboard then reseting it. Then go to device manager and see if it shows up.Have you tried installing the tv tuner in a different slot ? (if you have a different slot, You may need to update your USB Controller drivers, these are usually included with the motherboard chipset drivers. Look for drivers at the hardware manufacturer's website, not by using automatic updating by letting Windows "look for them".