Endless Memory Errors - "Application Error ... memory could not be read"

I have a PC that keeps getting these memory errors.
By all accounts, the PC is clean, no virus' detectect, not even a single
spy/adware detected.
Ran sfc /scannow.
Yet these application popups continue to persist.
What can I check that I haven't already?

Below I have pasted the application popups from the system event log.
I have also matched those up with some events from the application log.

Thanks,
Matt


Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 5/16/2006
Time: 10:12:45 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Application popup: jrestub.exe - Application Error : The instruction at
"0x0166f020" referenced memory at "0x00000ba0". The memory could not be
"read".

Click on OK to terminate the program



Event Type: Information
Event Source: MsiInstaller
Event Category: None
Event ID: 11707
Date: 5/16/2006
Time: 10:12:45 AM
User: XLSTAFFING\brian
Computer: BRIANLAPTOP
Description:
Product: J2SE Runtime Environment 5.0 Update 3 -- Installation operation
completed successfully.

Data:
0000: 7b 33 32 34 38 46 30 41 {3248F0A
0008: 38 2d 36 38 31 33 2d 31 8-6813-1
0010: 31 44 36 2d 41 37 37 42 1D6-A77B
0018: 2d 30 30 42 30 44 30 31 -00B0D01
0020: 35 30 30 33 30 7d 50030}



Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 5/16/2006
Time: 9:54:52 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Application popup: IDriver.exe - Application Error : The instruction at
"0x77511029" referenced memory at "0x0000005c". The memory could not be
"read".

Click on OK to terminate the program
Click on CANCEL to debug the program


Event Type: Information
Event Source: IDriverT
Event Category: None
Event ID: 0
Date: 5/16/2006
Time: 9:55:24 AM
User: N/A
Computer: BRIANLAPTOP
Description:
The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found.
The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer. You may be
able to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event: Service
stopped.


Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 5/16/2006
Time: 9:44:34 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Application popup: iexplore.exe - Application Error : The instruction at
"0x01faf020" referenced memory at "0x00000ba0". The memory could not be
"read".

Click on OK to terminate the program



Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 5/16/2006
Time: 9:23:15 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Application popup: wmiprvse.exe - Application Error : The instruction at
"0x00b1f020" referenced memory at "0x00000ba0". The memory could not be
"read".

Click on OK to terminate the program



Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 5/16/2006
Time: 9:22:18 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Application popup: userinit.exe - Application Error : The instruction at
"0x0096f020" referenced memory at "0x00000ba0". The memory could not be
"read".

Click on OK to terminate the program



Event Type: Information
Event Source: SceCli
Event Category: None
Event ID: 1704
Date: 5/16/2006
Time: 9:22:17 AM
User: N/A
Computer: BRIANLAPTOP
Description:
Security policy in the Group policy objects has been applied successfully.

"Joe User" <joeuser@dodgeit.com> wrote in message
news:%23YuN0rUeGHA.3484@TK2MSFTNGP04.phx.gbl...
>I have a PC that keeps getting these memory errors.
> By all accounts, the PC is clean, no virus' detectect, not even a single
> spy/adware detected.
> Ran sfc /scannow.
> Yet these application popups continue to persist.
> What can I check that I haven't already?
>
> Below I have pasted the application popups from the system event log.
> I have also matched those up with some events from the application log.
>
> Thanks,
> Matt
>
>
> Event Type: Information
> Event Source: Application Popup
> Event Category: None
> Event ID: 26
> Date: 5/16/2006
> Time: 10:12:45 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Application popup: jrestub.exe - Application Error : The instruction at
> "0x0166f020" referenced memory at "0x00000ba0". The memory could not be
> "read".
>
> Click on OK to terminate the program
>
>
>
> Event Type: Information
> Event Source: MsiInstaller
> Event Category: None
> Event ID: 11707
> Date: 5/16/2006
> Time: 10:12:45 AM
> User: XLSTAFFING\brian
> Computer: BRIANLAPTOP
> Description:
> Product: J2SE Runtime Environment 5.0 Update 3 -- Installation operation
> completed successfully.
>
> Data:
> 0000: 7b 33 32 34 38 46 30 41 {3248F0A
> 0008: 38 2d 36 38 31 33 2d 31 8-6813-1
> 0010: 31 44 36 2d 41 37 37 42 1D6-A77B
> 0018: 2d 30 30 42 30 44 30 31 -00B0D01
> 0020: 35 30 30 33 30 7d 50030}
>
>
>
> Event Type: Information
> Event Source: Application Popup
> Event Category: None
> Event ID: 26
> Date: 5/16/2006
> Time: 9:54:52 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Application popup: IDriver.exe - Application Error : The instruction at
> "0x77511029" referenced memory at "0x0000005c". The memory could not be
> "read".
>
> Click on OK to terminate the program
> Click on CANCEL to debug the program
>
>
> Event Type: Information
> Event Source: IDriverT
> Event Category: None
> Event ID: 0
> Date: 5/16/2006
> Time: 9:55:24 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found.
> The local computer may not have the necessary registry information or
> message DLL files to display messages from a remote computer. You may be
> able to use the /AUXSOURCE= flag to retrieve this description; see Help
> and Support for details. The following information is part of the event:
> Service stopped.
>
>
> Event Type: Information
> Event Source: Application Popup
> Event Category: None
> Event ID: 26
> Date: 5/16/2006
> Time: 9:44:34 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Application popup: iexplore.exe - Application Error : The instruction at
> "0x01faf020" referenced memory at "0x00000ba0". The memory could not be
> "read".
>
> Click on OK to terminate the program
>
>
>
> Event Type: Information
> Event Source: Application Popup
> Event Category: None
> Event ID: 26
> Date: 5/16/2006
> Time: 9:23:15 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Application popup: wmiprvse.exe - Application Error : The instruction at
> "0x00b1f020" referenced memory at "0x00000ba0". The memory could not be
> "read".
>
> Click on OK to terminate the program
>
>
>
> Event Type: Information
> Event Source: Application Popup
> Event Category: None
> Event ID: 26
> Date: 5/16/2006
> Time: 9:22:18 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Application popup: userinit.exe - Application Error : The instruction at
> "0x0096f020" referenced memory at "0x00000ba0". The memory could not be
> "read".
>
> Click on OK to terminate the program
>
>
>
> Event Type: Information
> Event Source: SceCli
> Event Category: None
> Event ID: 1704
> Date: 5/16/2006
> Time: 9:22:17 AM
> User: N/A
> Computer: BRIANLAPTOP
> Description:
> Security policy in the Group policy objects has been applied successfully.
>
>
Perhaps you have questionable RAM. Have you run one of the many memory test
programs?
Jim

Thanks for the reply Jim,
I have not run a memory testing program, because all the cases I have
researched with similar problems have found nothing when running a memory
test.
However, it's a good suggestion and it couldn't hurt. I'll give it a try.
Matt

"Jim" <j.n@nospam.com> wrote in message
news:OjGag.28452$4L1.10696@newssvr11.news.prodigy.com...
>
> "Joe User" <joeuser@dodgeit.com> wrote in message
> news:%23YuN0rUeGHA.3484@TK2MSFTNGP04.phx.gbl...
>>I have a PC that keeps getting these memory errors.
>> By all accounts, the PC is clean, no virus' detectect, not even a single
>> spy/adware detected.
>> Ran sfc /scannow.
>> Yet these application popups continue to persist.
>> What can I check that I haven't already?
>>
>> Below I have pasted the application popups from the system event log.
>> I have also matched those up with some events from the application log.
>>
>> Thanks,
>> Matt
>>
>>
>> Event Type: Information
>> Event Source: Application Popup
>> Event Category: None
>> Event ID: 26
>> Date: 5/16/2006
>> Time: 10:12:45 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Application popup: jrestub.exe - Application Error : The instruction at
>> "0x0166f020" referenced memory at "0x00000ba0". The memory could not be
>> "read".
>>
>> Click on OK to terminate the program
>>
>>
>>
>> Event Type: Information
>> Event Source: MsiInstaller
>> Event Category: None
>> Event ID: 11707
>> Date: 5/16/2006
>> Time: 10:12:45 AM
>> User: XLSTAFFING\brian
>> Computer: BRIANLAPTOP
>> Description:
>> Product: J2SE Runtime Environment 5.0 Update 3 -- Installation operation
>> completed successfully.
>>
>> Data:
>> 0000: 7b 33 32 34 38 46 30 41 {3248F0A
>> 0008: 38 2d 36 38 31 33 2d 31 8-6813-1
>> 0010: 31 44 36 2d 41 37 37 42 1D6-A77B
>> 0018: 2d 30 30 42 30 44 30 31 -00B0D01
>> 0020: 35 30 30 33 30 7d 50030}
>>
>>
>>
>> Event Type: Information
>> Event Source: Application Popup
>> Event Category: None
>> Event ID: 26
>> Date: 5/16/2006
>> Time: 9:54:52 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Application popup: IDriver.exe - Application Error : The instruction at
>> "0x77511029" referenced memory at "0x0000005c". The memory could not be
>> "read".
>>
>> Click on OK to terminate the program
>> Click on CANCEL to debug the program
>>
>>
>> Event Type: Information
>> Event Source: IDriverT
>> Event Category: None
>> Event ID: 0
>> Date: 5/16/2006
>> Time: 9:55:24 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be
>> found. The local computer may not have the necessary registry information
>> or message DLL files to display messages from a remote computer. You may
>> be able to use the /AUXSOURCE= flag to retrieve this description; see
>> Help and Support for details. The following information is part of the
>> event: Service stopped.
>>
>>
>> Event Type: Information
>> Event Source: Application Popup
>> Event Category: None
>> Event ID: 26
>> Date: 5/16/2006
>> Time: 9:44:34 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Application popup: iexplore.exe - Application Error : The instruction at
>> "0x01faf020" referenced memory at "0x00000ba0". The memory could not be
>> "read".
>>
>> Click on OK to terminate the program
>>
>>
>>
>> Event Type: Information
>> Event Source: Application Popup
>> Event Category: None
>> Event ID: 26
>> Date: 5/16/2006
>> Time: 9:23:15 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Application popup: wmiprvse.exe - Application Error : The instruction at
>> "0x00b1f020" referenced memory at "0x00000ba0". The memory could not be
>> "read".
>>
>> Click on OK to terminate the program
>>
>>
>>
>> Event Type: Information
>> Event Source: Application Popup
>> Event Category: None
>> Event ID: 26
>> Date: 5/16/2006
>> Time: 9:22:18 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Application popup: userinit.exe - Application Error : The instruction at
>> "0x0096f020" referenced memory at "0x00000ba0". The memory could not be
>> "read".
>>
>> Click on OK to terminate the program
>>
>>
>>
>> Event Type: Information
>> Event Source: SceCli
>> Event Category: None
>> Event ID: 1704
>> Date: 5/16/2006
>> Time: 9:22:17 AM
>> User: N/A
>> Computer: BRIANLAPTOP
>> Description:
>> Security policy in the Group policy objects has been applied
>> successfully.
>>
>>
> Perhaps you have questionable RAM. Have you run one of the many memory
> test programs?
> Jim
>

Okay, ran mem test.
Did not find any errors.
Any other suggestions?

"Joe User" <joeuser@dodgeit.com> wrote in message
news:%23jpgpoceGHA.3364@TK2MSFTNGP05.phx.gbl...
> Thanks for the reply Jim,
> I have not run a memory testing program, because all the cases I have
> researched with similar problems have found nothing when running a memory
> test.
> However, it's a good suggestion and it couldn't hurt. I'll give it a try.
> Matt
>
> "Jim" <j.n@nospam.com> wrote in message
> news:OjGag.28452$4L1.10696@newssvr11.news.prodigy.com...
>>
>> "Joe User" <joeuser@dodgeit.com> wrote in message
>> news:%23YuN0rUeGHA.3484@TK2MSFTNGP04.phx.gbl...
>>>I have a PC that keeps getting these memory errors.
>>> By all accounts, the PC is clean, no virus' detectect, not even a single
>>> spy/adware detected.
>>> Ran sfc /scannow.
>>> Yet these application popups continue to persist.
>>> What can I check that I haven't already?
>>>
>>> Below I have pasted the application popups from the system event log.
>>> I have also matched those up with some events from the application log.
>>>
>>> Thanks,
>>> Matt
>>>
>>>
>>> Event Type: Information
>>> Event Source: Application Popup
>>> Event Category: None
>>> Event ID: 26
>>> Date: 5/16/2006
>>> Time: 10:12:45 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Application popup: jrestub.exe - Application Error : The instruction at
>>> "0x0166f020" referenced memory at "0x00000ba0". The memory could not be
>>> "read".
>>>
>>> Click on OK to terminate the program
>>>
>>>
>>>
>>> Event Type: Information
>>> Event Source: MsiInstaller
>>> Event Category: None
>>> Event ID: 11707
>>> Date: 5/16/2006
>>> Time: 10:12:45 AM
>>> User: XLSTAFFING\brian
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Product: J2SE Runtime Environment 5.0 Update 3 -- Installation operation
>>> completed successfully.
>>>
>>> Data:
>>> 0000: 7b 33 32 34 38 46 30 41 {3248F0A
>>> 0008: 38 2d 36 38 31 33 2d 31 8-6813-1
>>> 0010: 31 44 36 2d 41 37 37 42 1D6-A77B
>>> 0018: 2d 30 30 42 30 44 30 31 -00B0D01
>>> 0020: 35 30 30 33 30 7d 50030}
>>>
>>>
>>>
>>> Event Type: Information
>>> Event Source: Application Popup
>>> Event Category: None
>>> Event ID: 26
>>> Date: 5/16/2006
>>> Time: 9:54:52 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Application popup: IDriver.exe - Application Error : The instruction at
>>> "0x77511029" referenced memory at "0x0000005c". The memory could not be
>>> "read".
>>>
>>> Click on OK to terminate the program
>>> Click on CANCEL to debug the program
>>>
>>>
>>> Event Type: Information
>>> Event Source: IDriverT
>>> Event Category: None
>>> Event ID: 0
>>> Date: 5/16/2006
>>> Time: 9:55:24 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be
>>> found. The local computer may not have the necessary registry
>>> information or message DLL files to display messages from a remote
>>> computer. You may be able to use the /AUXSOURCE= flag to retrieve this
>>> description; see Help and Support for details. The following information
>>> is part of the event: Service stopped.
>>>
>>>
>>> Event Type: Information
>>> Event Source: Application Popup
>>> Event Category: None
>>> Event ID: 26
>>> Date: 5/16/2006
>>> Time: 9:44:34 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Application popup: iexplore.exe - Application Error : The instruction at
>>> "0x01faf020" referenced memory at "0x00000ba0". The memory could not be
>>> "read".
>>>
>>> Click on OK to terminate the program
>>>
>>>
>>>
>>> Event Type: Information
>>> Event Source: Application Popup
>>> Event Category: None
>>> Event ID: 26
>>> Date: 5/16/2006
>>> Time: 9:23:15 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Application popup: wmiprvse.exe - Application Error : The instruction at
>>> "0x00b1f020" referenced memory at "0x00000ba0". The memory could not be
>>> "read".
>>>
>>> Click on OK to terminate the program
>>>
>>>
>>>
>>> Event Type: Information
>>> Event Source: Application Popup
>>> Event Category: None
>>> Event ID: 26
>>> Date: 5/16/2006
>>> Time: 9:22:18 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Application popup: userinit.exe - Application Error : The instruction at
>>> "0x0096f020" referenced memory at "0x00000ba0". The memory could not be
>>> "read".
>>>
>>> Click on OK to terminate the program
>>>
>>>
>>>
>>> Event Type: Information
>>> Event Source: SceCli
>>> Event Category: None
>>> Event ID: 1704
>>> Date: 5/16/2006
>>> Time: 9:22:17 AM
>>> User: N/A
>>> Computer: BRIANLAPTOP
>>> Description:
>>> Security policy in the Group policy objects has been applied
>>> successfully.
>>>
>>>
>> Perhaps you have questionable RAM. Have you run one of the many memory
>> test programs?
>> Jim
>>
>
>

I also have a similar problem on almost all programs. My computer keeps
on giving me all those errors and the applications end.

Any help

I also have been chasing this problem. I have run memory tests, adware scans,
a/v scans - everything comes back clean.

The errors:
In title bar: "offending program" - Application Error

The instruction at "address varies" referenced memory at "0x00000ba0". The
memory could not be "read".

Click on OK to terminate the program.

The "address varies" portion is not consistant for any program, however it
is consistant after each reboot and starting and exiting iexplore.exe. After
each reboot iexplore.exe will give the same address again and again.

The "referenced memory": 0x00000ba0 is consistant. Every program that causes
this error has the same referenced memory address of 0x00000ba0 everytime the
computer is rebooted.



The first error on my laptop occurs just after booting up and before logging
into the domain. The offending program is userint.exe

The second error occurs just after logging in by wgatray.exe.

Subsiquent error occur whenever internet explorer is closed.

Other than that, the laptop runs fine.

I hope this helps.

Scott




"Jim" wrote:

>
> "Joe User" <joeuser@dodgeit.com> wrote in message
> news:%23YuN0rUeGHA.3484@TK2MSFTNGP04.phx.gbl...
> >I have a PC that keeps getting these memory errors.
> > By all accounts, the PC is clean, no virus' detectect, not even a single
> > spy/adware detected.
> > Ran sfc /scannow.
> > Yet these application popups continue to persist.
> > What can I check that I haven't already?
> >
> > Below I have pasted the application popups from the system event log.
> > I have also matched those up with some events from the application log.
> >
> > Thanks,
> > Matt
> >
> >
> > Event Type: Information
> > Event Source: Application Popup
> > Event Category: None
> > Event ID: 26
> > Date: 5/16/2006
> > Time: 10:12:45 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Application popup: jrestub.exe - Application Error : The instruction at
> > "0x0166f020" referenced memory at "0x00000ba0". The memory could not be
> > "read".
> >
> > Click on OK to terminate the program
> >
> >
> >
> > Event Type: Information
> > Event Source: MsiInstaller
> > Event Category: None
> > Event ID: 11707
> > Date: 5/16/2006
> > Time: 10:12:45 AM
> > User: XLSTAFFING\brian
> > Computer: BRIANLAPTOP
> > Description:
> > Product: J2SE Runtime Environment 5.0 Update 3 -- Installation operation
> > completed successfully.
> >
> > Data:
> > 0000: 7b 33 32 34 38 46 30 41 {3248F0A
> > 0008: 38 2d 36 38 31 33 2d 31 8-6813-1
> > 0010: 31 44 36 2d 41 37 37 42 1D6-A77B
> > 0018: 2d 30 30 42 30 44 30 31 -00B0D01
> > 0020: 35 30 30 33 30 7d 50030}
> >
> >
> >
> > Event Type: Information
> > Event Source: Application Popup
> > Event Category: None
> > Event ID: 26
> > Date: 5/16/2006
> > Time: 9:54:52 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Application popup: IDriver.exe - Application Error : The instruction at
> > "0x77511029" referenced memory at "0x0000005c". The memory could not be
> > "read".
> >
> > Click on OK to terminate the program
> > Click on CANCEL to debug the program
> >
> >
> > Event Type: Information
> > Event Source: IDriverT
> > Event Category: None
> > Event ID: 0
> > Date: 5/16/2006
> > Time: 9:55:24 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > The description for Event ID ( 0 ) in Source ( IDriverT ) cannot be found.
> > The local computer may not have the necessary registry information or
> > message DLL files to display messages from a remote computer. You may be
> > able to use the /AUXSOURCE= flag to retrieve this description; see Help
> > and Support for details. The following information is part of the event:
> > Service stopped.
> >
> >
> > Event Type: Information
> > Event Source: Application Popup
> > Event Category: None
> > Event ID: 26
> > Date: 5/16/2006
> > Time: 9:44:34 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Application popup: iexplore.exe - Application Error : The instruction at
> > "0x01faf020" referenced memory at "0x00000ba0". The memory could not be
> > "read".
> >
> > Click on OK to terminate the program
> >
> >
> >
> > Event Type: Information
> > Event Source: Application Popup
> > Event Category: None
> > Event ID: 26
> > Date: 5/16/2006
> > Time: 9:23:15 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Application popup: wmiprvse.exe - Application Error : The instruction at
> > "0x00b1f020" referenced memory at "0x00000ba0". The memory could not be
> > "read".
> >
> > Click on OK to terminate the program
> >
> >
> >
> > Event Type: Information
> > Event Source: Application Popup
> > Event Category: None
> > Event ID: 26
> > Date: 5/16/2006
> > Time: 9:22:18 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Application popup: userinit.exe - Application Error : The instruction at
> > "0x0096f020" referenced memory at "0x00000ba0". The memory could not be
> > "read".
> >
> > Click on OK to terminate the program
> >
> >
> >
> > Event Type: Information
> > Event Source: SceCli
> > Event Category: None
> > Event ID: 1704
> > Date: 5/16/2006
> > Time: 9:22:17 AM
> > User: N/A
> > Computer: BRIANLAPTOP
> > Description:
> > Security policy in the Group policy objects has been applied successfully.
> >
> >
> Perhaps you have questionable RAM. Have you run one of the many memory test
> programs?
> Jim
>
>
>

[Bobwama]

I had this problem with many programs at once, so that almost any time i ran a app, the error message popped up. The only way i could find to end this is to end my processes one by one until the error messages stopped appearing. In my case the problem was caused by spyware doctor. The only reason i have heard of for these errors is that a process has had an "unhandled exception" which, in these cases, means that the process has been caught in an infinite loop, consuming all the ram. Aapart from ending the process that's caught, i have found no solution