Go Back   TechArena Community > Technical Support > Computer Help > Windows XP > Windows Update
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



Error code 0x800F0826 installing Vista SP1

Windows Update


Reply
 
Thread Tools Search this Thread
  #1  
Old 22-03-2008
Jonathan
 
Posts: n/a
Error code 0x800F0826 installing Vista SP1

I'm trying to install Vista SP1 on my HP 8710w laptop with Vista Business
32-bit, and it gets all the way to stage 3 where it says it failed and
reverts the installation. When I get back into Windows I get the following
message from the SP1 installer:
Windows Vista Service Pack 1 was not installed on your computer.
Error code: 0x800F0826.

I have run CheckSUR, and the System File Checker, but they did not help.
After checking the CBS.log file I found the following error that appears to
be preventing SP1 from installing:
2008-03-21 02:31:16, Info CSI 00000095 Begin executing
advanced installer phase 38 (0x00000026) index 52 (0x00000034) (sequence 91)
Old component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
New component:
Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
Install mode: install
Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
Installer name: [15]"Generic Command"
2008-03-21 02:31:16, Info CSI 00000096 Calling generic
command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
CmdLine: [43]""C:\Windows\bfsvc.exe" C:\Windows\boot /mui"
2008-03-21 02:31:16, Error CSI 00000097 (F) Done with
generic command 3; CreateProcess returned 0, CPAW returned S_OK
Process exit code 15299 (0x00003bc3) resulted in success? FALSE
Process output: [l:0 ][gle=0x80004005]
2008-03-21 02:31:16, Info CSI
00000098@2008/3/21:07:31:16.928 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources,
Version = 6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
[l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;14997
2008-03-21 02:31:16, Error CSI 00000099 (F) Failed
execution of queue item Installer: Generic Command
({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT
HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be
initiated after all the operations in the installer queue are completed;
installer is reliable (2)[gle=0x80004005]
2008-03-21 02:31:16, Info CSI 0000009a End executing
advanced installer (sequence 91)
Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)

Similar errors are repeated through phase 38, index 72. I can provide a full
log if anyone is interested.

Does anyone know what I can do to get it to install successfully?

Reply With Quote
  #2  
Old 22-03-2008
TaurArian
 
Posts: n/a
Re: Error code 0x800F0826 installing Vista SP1

Windows Update error 800f0826
http://windowshelp.microsoft.com/Win...f1fde1033.mspx

Windows Vista Service Pack 1 (All Languages)
Unlimited installation and compatibility support is available at no charge until March 18,
2009.
https://support.microsoft.com/oas/de...4&gprid=500921


--

TaurArian [MVP] 2005-2008 - Update Services
http://taurarian.mvps.org
======================================
How to ask a question: http://support.microsoft.com/kb/555375
Computer Maintenance: Acronis / Diskeeper / Paragon / Raxco


"Jonathan" <Jonathan@discussions.microsoft.com> wrote in message
news:E008C44D-7546-474D-B831-C9E61155081F@microsoft.com...
| I'm trying to install Vista SP1 on my HP 8710w laptop with Vista Business
| 32-bit, and it gets all the way to stage 3 where it says it failed and
| reverts the installation. When I get back into Windows I get the following
| message from the SP1 installer:
| Windows Vista Service Pack 1 was not installed on your computer.
| Error code: 0x800F0826.
|
| I have run CheckSUR, and the System File Checker, but they did not help.
| After checking the CBS.log file I found the following error that appears to
| be preventing SP1 from installing:
| 2008-03-21 02:31:16, Info CSI 00000095 Begin executing
| advanced installer phase 38 (0x00000026) index 52 (0x00000034) (sequence 91)
| Old component:
| Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
| 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
| [l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
| b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
| New component:
| Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources, Version =
| 6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
| [l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
| b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
| Install mode: install
| Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
| Installer name: [15]"Generic Command"
| 2008-03-21 02:31:16, Info CSI 00000096 Calling generic
| command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
| CmdLine: [43]""C:\Windows\bfsvc.exe" C:\Windows\boot /mui"
| 2008-03-21 02:31:16, Error CSI 00000097 (F) Done with
| generic command 3; CreateProcess returned 0, CPAW returned S_OK
| Process exit code 15299 (0x00003bc3) resulted in success? FALSE
| Process output: [l:0 ][gle=0x80004005]
| 2008-03-21 02:31:16, Info CSI
| 00000098@2008/3/21:07:31:16.928 CSI Advanced installer perf trace:
|
CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};Microsoft-Windows-BootEnvironment-Core-BootManager-PCAT.Resources,
| Version = 6.0.6000.16603, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture =
| [l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8
| b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;14997
| 2008-03-21 02:31:16, Error CSI 00000099 (F) Failed
| execution of queue item Installer: Generic Command
| ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT
| HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be
| initiated after all the operations in the installer queue are completed;
| installer is reliable (2)[gle=0x80004005]
| 2008-03-21 02:31:16, Info CSI 0000009a End executing
| advanced installer (sequence 91)
| Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED)
|
| Similar errors are repeated through phase 38, index 72. I can provide a full
| log if anyone is interested.
|
| Does anyone know what I can do to get it to install successfully?


Reply With Quote
Reply

  TechArena Community > Technical Support > Computer Help > Windows XP > Windows Update
Tags:



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Error code 0x800F0826 installing Vista SP1"
Thread Thread Starter Forum Replies Last Post
Error code 0x8004ff11 while installing MSE hostess Networking & Security 5 15-04-2011 08:01 PM
While installing windows 7 an error 0x800f0826 is been occurred feNRE123 Operating Systems 4 22-03-2011 07:05 AM
Error code: 0x8007000D while installing Windows Vista Home Premium Edition Lucile Vista Setup and Install 4 18-07-2010 06:53 PM
Error code 2738 while installing Quicktime or iTunes on Vista CaspaR Vista Setup and Install 3 07-01-2009 11:32 PM
Error code 0x80FE0000 while installing vista akbar Vista Setup and Install 2 14-03-2007 12:58 PM


All times are GMT +5.5. The time now is 12:42 AM.