Need information on the malfunctioning of wireless router

[CRiley]

An error caused in the router configuration produces faults and this is the most common problem is improper to refer to the router settings cannot be caused by normal operation of the network, such as the lines at both ends of the router does not match the parameters or parameter error, or is it set up the routing mask errors. I am a new bee to this field of configuration of routers and I want to know the common faults in router configuration are and if possible please also provide the solution for the same.

[Shen]

“Cannot be the normal dialer” this the most common fault.

Cause of this malfunction:
The main problem is with the settings in the router's address.

Solution:
The solution to the problem is relatively simple, concrete way is: Open the Web browser, type in the address bar the router's management address, such as 192.168.1.1, this time will be asked to enter your login password (the password may be in the product's manual on the query to), after landing into the management interface, select the menu "Network Parameters" under the "WAN port setting options on the right in the main window," WAN port connection type "select" PPPoE ", enter" Internet Account "and" Internet Password ", click the Connect button.

[Steve123]

Router hardware, there is no problem, the computer is connected no problem, but cannot be achieved a normal connection, while the other computers on the LAN can normally connect to the Internet. This is also one of the failures in router configuration and the cause of this malfunction: This is generally caused due to ISP to bind MAC addresses cannot connect, because some ISP in order to limit access to the number of users, and in the authentication server on the MAC address of the binding, is not binding within the scope of normal users can not connect to the Internet.
Solution for this problem: First is bound MAC address of the computer connected to the router LAN port (but do not connect the router to provide wiring Modem or ISP), and then, using the router's MAC address cloning feature to copy the network card's MAC address to the broadband router's WAN port, and then in the computer is not binding on the following actions: Windows2000/XP basis under "Start → Run", type "cmd / kipconfig / all", where "PhysicalAddress" is the MAC address of the machine.

[Milton.J]

Cannot browse the web
Failure: Web pages not normally open, but the instant messaging program work properly.
Cause of the malfunction: This is the router's DNS resolution issues, if you set the DNS address of the gateway, which is DNSProxy, is not the real DNS addresses, address resolution may lead to an error.
Solution: To solve this problem, it is recommended the router and computer network card manually set the DNS server address ((ISP central office at the address provided), open the router setup interface, find the "network parameters" in the "WAN port parameters" of the field, and then The following DNS server addresses manually set. In addition, in the "DHCP Service" setting item, also need to manually set the DNS server and alternate DNS server address, the address from the ISP providers need to obtain.

[Spyrus]

Unable to login the router administration pages

Failure: Would like to make the enterprise broadband router to share access to the Internet about setting up, but cannot enter the administration interface.
Cause of the malfunction: The main landing was created before the connection is incorrect.
Solution: If you have previously logged in the router management interface, the user should first check the broadband router and computer hardware connections, check the indicator light on the router LAN port is normal, if your computer is equipped with a firewall or real-time monitoring of the anti-virus software, have temporarily closed the first , and then the local IP address set to the same network segment with the broadband router, and then set the router's default gateway address IP address. General broadband router Web management are provided, so open the "Internet Options" dialog box, in the "Connection" option, if the connection has been created then check the "Never dial a connection" option, click on "Local Area Network Settings "button, will have checked all the options you can uncheck.