Results 1 to 5 of 5

Thread: Microsoft Natural Ergonomic Keyboard 4000 doesn't work

  1. #1
    Join Date
    Oct 2005
    Posts
    55

    Microsoft Natural Ergonomic Keyboard 4000 doesn't work

    I and bought a new Microsoft Natural Ergonomic Keyboard 4000 keyboard. I am using a Dell Dimension 2400 PC. The keyboard offers a plug and play interface. When I connect the usb it is detected but it is not install. There is no light on the keyboard nor it responds at all. At last I am getting a message on the screen that the keyboard is not installed. I checked in Device manager and there is a unknown device located. It looks the keyboard is not compatible with my system. Any suggestions.

  2. #2
    Join Date
    Sep 2004
    Posts
    66
    Go in bios and enable usb legacy support. It is disabled due to which you are not able to get the keyboard working on the system. Also you can update the chipset drivers and check back. The keyboard must have came with some kind of CD that has its installer and pc software. Use that. There can be chances that your usb port is not proper and causing problem.

  3. #3
    Join Date
    Sep 2005
    Posts
    78
    Try to change port. Go in Device Manager and remove then remove those uninstalled hardware. Then check in bios that the usb is enabled. If still it does not work then you can use a usb to psu converter and hook the keyboard on a psu device. It worked for me when a old metallic keyboard was not able to work.

  4. #4
    Join Date
    Jan 2009
    Posts
    1
    This is a driver failure issue. And if after going with number of troubleshooting option the keyboard started to working. I have to perform a Windows Update. I do not know how it found the relative installation files. The computer must detect and due to lack of proper drivers it fails to work. ur wrists and can help prevent injuries.

  5. #5
    Join Date
    Feb 2011
    Posts
    1

    Re: Microsoft Natural Ergonomic Keyboard 4000 doesn't work

    When my computer (XP o/s) did not recognize my new 4000, I did this. Right click on My Computer icon on desktop. Properties/hardware/device manager/left click on universal serial bus controllers. Update the drivers for each controller or device in the list. Then: On bottom left of desktop: Start/Run/Services.msc. I found some services that were not turned on. When I selectively enabled them and rebooted, my k/b worked fine. I HATE HATE HATE Vista (on my Toshiba laptop) so was very pleased to be able to use the 4000 on this old (IDE) desktop PC. Good luck.

Similar Threads

  1. Replies: 1
    Last Post: 16-08-2013, 12:01 PM
  2. Keyboard doesn't work in Mint Linux
    By Farren in forum Operating Systems
    Replies: 8
    Last Post: 28-02-2012, 10:46 PM
  3. Replies: 6
    Last Post: 08-01-2012, 08:17 AM
  4. Apple USB Keyboard doesn't work
    By avit in forum Hardware Peripherals
    Replies: 5
    Last Post: 18-02-2010, 12:37 AM
  5. Ergonomic keyboard
    By ashish_mourya in forum Hardware Peripherals
    Replies: 1
    Last Post: 25-01-2010, 09:19 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,642,393,177.49491 seconds with 17 queries