Results 1 to 4 of 4

Thread: Error 734: PPP link control protocol was terminated

  1. #1
    Join Date
    Feb 2006
    Posts
    159

    Error 734: PPP link control protocol was terminated

    I have mobile phone that I am using as a bluetooth modem to connect my laptop to internet. So, I just dialed and validated the username and password but when the computer is trying to register on the network then I am getting some error message that states "Error 734: The PPP link Control Protocol was terminated". Can anyoen help me out with this problem? Thanks.

  2. #2
    Join Date
    Nov 2005
    Posts
    2,483

    Re: Error 734: PPP link control protocol was terminated

    If you want o resolve this issue then try to configure the VPN server to allow clients to connect with MS-CHAPv2 as the authentication method. You can also try to disable the PAP, CHAP and MS-CHAP v2 by following the below methods:
    1. First of all open the Network Sharing Center.
    2. After that click Manage network connections.
    3. In the Network Connections window, right-click the connection that you want to change, and then click Properties.
    4. In the User Account Control dialog box, click Continue.
    5. In the Connection Properties dialog box, click to select the Security tab, click Advanced (Custom Settings), and then click Settings.
    6. In the Advanced Security Settings dialog box, click to either enable or disable the options for PAP, CHAP and MS-CHAP v2, and then click OK.

  3. #3
    Join Date
    Feb 2011
    Location
    Bilaspur, CG, India
    Posts
    1

    Re: Error 734: PPP link control protocol was terminated

    Any one/ all of the following shall fix the problem

    1 If using double SIM Mobile, change the UART setting in Mobile to the proper SIM.

    2. open Network Connections in control Panel. Locate your connection, right click it then select properties.

    3. In Networking tab, click Settings. Then clear Following Chek boxes
    i)the Negotiate multi-link for single link connections
    ii) Enable LCP Extensions

    4. In Security tab. choose Allow unsecured password, in the Validate my identity as follows box,

    5 In security tab, if usuing advanced security setting, Clear MS ChAP-2
    Last edited by ypgmaya; 25-02-2011 at 07:20 PM.

  4. #4
    Join Date
    Mar 2009
    Posts
    3

    Re: Error 734: PPP link control protocol was terminated

    its so simple try these
    PPP Link error resolution when you connect to mobile Internet

    Start > Control panel
    Phone and modem option > modems
    select mtk gprs modem > properties
    General > change settings
    Advanced tab > extra initialization commmands
    When using "Docomo"
    at+cgdcont=1,"ip","tata.docomo.internet","",0,0
    When using "Airtel "
    at+cgdcont=1,"ip","airtelgprs.com"<cr>

    Thanks to Nitin Bang for this tip.

Similar Threads

  1. PPP transmission control protocol was terminated?
    By Elowen in forum Networking & Security
    Replies: 5
    Last Post: 20-06-2011, 10:41 PM
  2. Replies: 4
    Last Post: 29-12-2009, 04:39 PM
  3. Error 734: The PPP link control protocol was terminated.
    By GoldStein in forum Vista Setup and Install
    Replies: 1
    Last Post: 19-02-2009, 05:46 PM
  4. Replies: 3
    Last Post: 19-02-2009, 05:40 PM
  5. VPN error 734: The PPP Link Control Protocol Was Terminated
    By fiefie.niles@gmail.com in forum Vista Help
    Replies: 1
    Last Post: 05-02-2008, 10:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,263,098.49110 seconds with 18 queries