how to locate Intel(R) 82579V Gigabyte Network driver for Win SBS 2008

[Janya]

I have purchased the new sandy bridge core i5 machine at my office for professional use. And then I try to install the Win SBS 2008 but during the process I get the message for the driver for Ethernet adaptor. But I unable to find any whatever online or the CD driver. I cannot understand the exact reason of this problem. so my problem Is how to locate Intel(R) 82579V Gigabyte Network driver for Win SBS 2008. Can anyone give me some idea to solve this problem? please help me.

[Amie]

I read your problem and come to know that you have the problem that faced by many people in this field regularly. I want to tell you some information about that. The Intel (R) 82579V Gigabyte Network Connection does not have drivers for any operating system Windows Server. I know this does not help, but to one person you want in this discussion, the Intel (R) 82579LM Gigabyte Network Connection has drivers for Windows Server operating systems. I hope this will help you to solve your problem.

[HiSpeed]

After reading your problem I want to give you some suggestion but I want to ask some information about your system. Were you able to find drivers for devices on your system? Sometimes you unable to find the Windows Server for devices on a system that was designed as a client. A small server system is usually the best option for running a server operating system because the system could be designed to be a server. However, if you can find drivers for all devices, server operating system should work on your system. This might fix your issue.

[BiGMaCHiNe]

I also had same problem before sometime and that’s why here I am giving you some information about the problem. you can add an Ethernet adapter. All adapters listed at any intel authenticated site there you can get the Ethernet with driver support for Windows Server 2008. If you have an available PCI Express (PCIe aka) slot, I would go with one of the adapters of new uses that technology. I think this can give you better experience.

[void]

I want to you give some suggestion for your issue. I think the problem with your Intel motherboard DH61CR. So you have to update your system to new firmware which is available. So you can see the activity of L1, since the signals of the connected cables. Even you can get the IP address of the DHCP server. The network is very simple - not only administrative changes. This will work for you.

[CodGuru]

You have to use the online help for server problem. you can get the support for this from any authenticated site of the Intel. Or you have to take your system to the gallery. Sometime this kind of problem is occurred due to hardware fault or some user’s mistakes. So try to check out the all connections you have and then you have to fix the issue if you found any problem. in this way you can clear all the problem. if this not work then I m sorry I can’t give any more information.

[Javalava]

I ran into the same problem when installing Win Server 2008 R2, No drivers for the Network Card.
I went to the HP link below:
http://h20000.www2.hp.com/bizsupport...tem=ob-92065-1
SP 52209.exe was my solution.
Dont run the setup it will not work that way.
Do an add a device, It will load the driver that way.
Been using it for over a month now with no issues.

[goldeneye025]

check this:


install with no problems and just ignor the warning/error message.

finally its done the real drivers that support it all windows (incl servers).

use the pro1000 and open the device manager and click on update driver and find the location you saved.

the path is (original is on 7) downloads\Intel_Gigabit_16500_XPVistaWin7\driver\pro1000\WinX64\

NDIS5x is for Win XP and Server 2003
NDIS61 is for Win Vista and Server 2008
NDIS62 is for Win 7 and Server 2008 R2

its only 64 bit supporting but i used Win 7 and Server 2008 R2 and its working 100% and the other i did not tested it.

goodluck and try it now

[goldeneye025]

a new link the other link is dead.

i update the drivers and now they must work for every windows (incl servers) (all editions except itanium editions but i have not tested it because i dont have a itanium).

for 32 and 64 bit XP, Vista, 7, server 2003, server 2008, server 2008 R2 will work now.

try it now and you must ignor the warning/error message and will work must open the device manager and then the network driver is missing and then update driver find the path where you save it and use pro1000 will work 100% for 32 and 64 bit all windows editions and servers included.

the link is: : http://www.mediafire.com/file/xn08beawrdti2mb

succeed with it.