Results 1 to 5 of 5

Thread: How to avoid the crash?

  1. #1
    Join Date
    Apr 2008
    Posts
    60

    How to avoid the crash?

    Yesterday I had a screen of death. After reboot, I had a reply from Windows saying that I had a hardware problem, he advised me to make quick backups, and then he gave me 4 options:

    Memory (RAM)
    System board
    CPU
    Food.

    This morning I had to repeat myself several times to arrive at the start. When I weigh the button, I get no response, just a funny noise. This is food or something else?

    Thank you

  2. #2
    Join Date
    May 2008
    Posts
    2,389

    Re: How to avoid the crash?

    It does not beep at startup?

    Say to know, you have to go first by changing the diet

  3. #3
    Join Date
    May 2008
    Posts
    372

    Re: How to avoid the crash?

    I had this problem and it was food that was too low

  4. #4
    Join Date
    Apr 2008
    Posts
    60

    Re: How to avoid the crash?

    Can you help me, before that nothing works?

    This morning at startup, it went normally, but the screen remained black. I heard the startup itself out, nothing on the screen. I turned off and restarted, and everything went well.

    When I weigh the button to lock, here is a funny noise. I think it's hardware, but I do not know what?

  5. #5
    Join Date
    Apr 2008
    Posts
    2,565

    Re: How to avoid the crash?

    Hello, In my opinion there is either abnormal heating or a bad contact when:

    *****************
    Troubleshooting initial TOUR
    *****************

    1 .- Remove the cables and power cord and wait 1 / 2 hours for the condo of food. or 0V.
    2 .- Open the case and examine the fan of dirt
    - CPU
    - Housing. graphics card etc.
    - the food
    - etc.

    3 .- CLEANING: Vacuum with a brush cleaning with mid-drive by not pushing too on fan blades with the brush. Possibly remove the fan to properly clean the heatsink on the CPU.
    3b: Submit and open feeding and cleaning. and rest and close the case.
    4 .- Remove all cards and clean
    5 .- Put the card display properly plugging the bottom screw and restart the machine
    Check that all revolve ventilos
    OK if: stopping the machine and pull the cord
    6 .- Replace the cards one after the other
    etc.
    Close the box. (Caution some surveillance a case of opening (to annihilate)


    Often axis ventilator not oiled properly and wears before blocking (the noise has increased dramatically since the axis starts to oscillate axially ..
    a) get a small burette low oil flow for sewing machine oil or a pure and clear.
    b) Remove the fan
    c) Clean ALL VENTILO very very well with a rag soaked in liquid washing windows.
    d) take off the sticker covering the central part by entering through a tweezers at the point of connection of the son. Preserve the sticky thread on a board or glass.
    e) Using a cutting edge not lift the rubber that protects the hub of the fan.
    f) to ONE LITTLE DROP AND OIL.
    g) Close everything.
    If you did it correctly no problems ...

    good luck

Similar Threads

  1. Things you should avoid in SEO
    By Fernandoa in forum Tips & Tweaks
    Replies: 2
    Last Post: 11-07-2011, 01:36 AM
  2. what is a spam box and how to avoid it?
    By JErastus in forum Networking & Security
    Replies: 6
    Last Post: 06-07-2011, 10:58 PM
  3. Replies: 5
    Last Post: 06-06-2011, 10:35 AM
  4. How to avoid ISP throttle
    By Rivan in forum Technology & Internet
    Replies: 4
    Last Post: 22-06-2010, 10:41 AM
  5. Vcore to avoid?
    By Sentential in forum Overclocking & Computer Modification
    Replies: 5
    Last Post: 18-12-2008, 02:32 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,649,840.53946 seconds with 17 queries