Error on connecting the USB Drivers

[srini1705]

After connecting my external usb devices into my laptop, i am not able access those drivers. i was getting the following error. (Windows cannot initialize the device driver for this hardware. (Code 37)).

On the disk management the volumes are shown but i am not able to allocate the drive letter names.

Is any solutions available please

Srini

[Effren]

Hello, Follow the step to solve your problem

Remove the UpperFilters and LowerFilters values by:

1. Expand the HKEY_LOCAL_MACHINE key (looks like a folder) by double clicking it (or clicking the + next to it.) Expand the SYSTEM Key
2. Expand the CurrentControlSet Key
3. Expand the Control Key
4. Expand the Class Key
5. Please look for a key containing the following string of letter and numbers:
   
   {4D36E965-E325-11CE-BFC1-08002BE10318}
   
   
6. Highlight this key by left clicking once on it.
7. On the right hand side you are looking for UpperFilters and LowerFilters, once you find these please delete them - Highlight them (clicking on them once) and then delete them by right-clicking on them and choosing delete (or pressing Delete on your keyboard.)
8. Close the Registry Editor, click on File and then click on Exit
9. Restart your computer. Your CD/DVD Drives should be back and functioning.

[EnZo2]

Follow This steps

1) Boot into Safe Mode (start tapping the F8 key at power-up & select Safe Mode from the menu)
2) Go to Device Manager
3) Remove all devices under the USB category
4) Remove your audio device if it is still listed under "hard disk controllers"
5) Reboot
6) Allow Windows to reinstall the drivers for the USB controllers on the motherboard
7) Connect USB drive.

[Macarenas]

The driver returned failure from its DriverEntry routine. Uninstall the driver, and then click Scan for hardware changes to reinstall or upgrade the driver.

[Raine]

The driver returned a failure when it executed the DriverEntry routine. Reinstall the drivers for this device.

Uninstall and reinstall the driver
Uninstall the driver from Device Manager, and then scan for new hardware to install the driver again. You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware manufacturer’s Web site.

1. On the device Properties dialog box, click the Driver tab, and then click Uninstall. Follow the instructions.
2. Restart your computer.
3. Open Device Manager, click Action, and then click Scan for hardware changes. Follow the instructions.

[Macarenas]

visit the below provided site for solution:

Solution! Windows cannot initialize the device driver for this hardware. (Code 37)