Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22

Thread: ADPREP /forestprep failure - directory service busy

  1. #16
    MWave6@gmail.com Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi Morgan,

    Thanks, I'll follow these steps as well.

    Is it also a good indicator that the Schema Version in the registry is
    listed as level 31? Specifically, this is contained on DCs as:

    \HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters\Schema Version

    Will keep you posted and thanks for all of your good advice!


    -Tom W.


    On Jun 23, 6:10 am, v-mor...@online.microsoft.com (Morgan che(MSFT))
    wrote:
    > Hi,
    >
    > < Where does one go to verify these items?>
    >
    > {Morgan}:
    >
    > You can use Adsiedit.msc to view these objects and their values, which is
    > included in support tools. You can download it at or install it from
    > installation disk 1 :
    >
    > http://www.microsoft.com/downloads/d...d=6EC50B78-8BE....
    > B3BE-4E7AC4F0912D&displaylang=en
    >
    > You can also simply check the schema version by using the Adsiedit.exe
    > utility or the Ldp.exe utility. You can view the objectVersion attribute in
    > the properties of the cn=schema,cn=configuration,dc=<domain> partition. The
    > value of the objectVersion attribute are in decimal.
    >
    > Schema Version ObjectVersion values and corresponding operating system
    > support level
    >
    > o 13=Microsoft Windows 2000
    > o 30=Original release version of Microsoft Windows Server 2003 and
    > Microsoft Windows Server 2003 Service Pack 1 (SP1)
    > o 31=Microsoft Windows Server 2003 R2
    >
    > Note: The Adsiedit.exe utility and the Ldp.exe utility are included with
    > Windows Server 2003 R2 support tools. To install support tools, run
    > Suptools.msi from the \Support\Tools folder on installation disk 1.
    >
    > Hope this helps.
    >
    > Sincerely
    > Morgan Che
    > Microsoft Online Support
    > Microsoft Global Technical Support Center


  2. #17
    Morgan che Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi,

    Yes, you can look at the registry value to check the current Schema Version.

    In fact, we have three methods to view Schema version:

    1>Registry subkey on a domain controller at :

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NTDS\Parameters

    2> ObjectVersion attribute

    You can also check the schema level by using the Adsiedit or the Ldp to
    view the objectVersion attribute on the properties of the
    cn=schema,cn=configuration,dc=<domain> partition.

    Note: The value of the schema version registry subkey and the objectVersion
    attribute are in decimal.

    Values:

    13=Microsoft Windows 2000
    30=Original release version of Microsoft Windows Server 2003 and Microsoft
    Windows Server 2003 SP1
    31=Microsoft Windows Server 2003 R2
    44=Windows Server 2008

    3>Command line

    Alternatively, you can simply run Schupgr.exe on the computer you want to
    check. You may receive an error message, but the third line does report the
    current version number.

    Hope this helps. For any update on your side, we are appreciated to been
    posted. Thanks.


    Sincerely
    Morgan Che
    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security
    =====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    =====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.


    --------------------
    --->From: MWave6@gmail.com
    --->Newsgroups: microsoft.public.windows.server.migration
    --->Subject: Re: ADPREP /forestprep failure - directory service busy
    --->Date: Mon, 23 Jun 2008 14:23:12 -0700 (PDT)
    --->Organization: http://groups.google.com
    --->Lines: 56
    --->Message-ID:
    <2b7a5238-c8cc-4f13-802b-d93398f2996d@k13g2000hse.googlegroups.com>
    --->References: <4830932e$0$4109$4c368faf@roadrunner.com>
    <cPQE8cZuIHA.5796@TK2MSFTNGHUB02.phx.gbl>
    ---> <c6e90e71-235a-4ede-ae43-113aef3468e9@m44g2000hsc.googlegroups.com>
    ---> <6b4yyZJwIHA.4216@TK2MSFTNGHUB02.phx.gbl>
    <483f7524$0$31743$4c368faf@roadrunner.com>
    ---> <JCP64#hwIHA.5796@TK2MSFTNGHUB02.phx.gbl>
    <485e9099$0$7036$4c368faf@roadrunner.com>
    ---> <eCg1YlR1IHA.5360@TK2MSFTNGHUB02.phx.gbl>
    --->NNTP-Posting-Host: 207.59.155.242
    --->Mime-Version: 1.0
    --->Content-Type: text/plain; charset=ISO-8859-1
    --->Content-Transfer-Encoding: quoted-printable
    --->X-Trace: posting.google.com 1214256192 15580 127.0.0.1 (23 Jun 2008
    21:23:12 GMT)
    --->X-Complaints-To: groups-abuse@google.com
    --->NNTP-Posting-Date: Mon, 23 Jun 2008 21:23:12 +0000 (UTC)
    --->Complaints-To: groups-abuse@google.com
    --->Injection-Info: k13g2000hse.googlegroups.com;
    posting-host=207.59.155.242;
    ---> posting-account=S_PscgoAAADwKC66mgrYI_-_Wx_kveZF
    --->User-Agent: G2/1.0
    --->X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
    SV1; .NET
    ---> CLR 1.1.4322),gzip(gfe),gzip(gfe)
    --->Bytes: 3293
    --->Path:
    TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!TK2MSFTFE
    EDS01.phx.gbl!newsfeed00.sul.t-online.de!t-online.de!border2.nntp.dca.gigane
    ws.com!nntp.giganews.com!postnews.google.com!k13g2000hse.googlegroups.com!no
    t-for-mail
    --->Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.server.migration:3876
    --->X-Tomcat-NG: microsoft.public.windows.server.migration
    --->
    --->Hi Morgan,
    --->Thanks, I'll follow these steps as well.
    --->Is it also a good indicator that the Schema Version in the registry is
    --->listed as level 31? Specifically, this is contained on DCs as:
    --->\HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters\Schema Version
    --->Will keep you posted and thanks for all of your good advice!
    --->-Tom W.
    --->On Jun 23, 6:10 am, v-mor...@online.microsoft.com (Morgan che(MSFT))
    --->wrote:
    --->> Hi,
    --->>
    --->> < Where does one go to verify these items?>
    --->>
    --->> {Morgan}:
    --->>
    --->> You can use Adsiedit.msc to view these objects and their values,
    which is
    --->> included in support tools. You can download it at or install it from
    --->> installation disk 1 :
    --->>
    --->>
    http://www.microsoft.com/downloads/d...d=6EC50B78-8BE...
    --->> B3BE-4E7AC4F0912D&displaylang=en
    --->>
    --->> You can also simply check the schema version by using the Adsiedit.exe
    --->> utility or the Ldp.exe utility. You can view the objectVersion
    attribute in
    --->> the properties of the cn=schema,cn=configuration,dc=<domain>
    partition. The
    --->> value of the objectVersion attribute are in decimal.
    --->>
    --->> Schema Version ObjectVersion values and corresponding operating system
    --->> support level
    --->>
    --->> o 13=Microsoft Windows 2000
    --->> o 30=Original release version of Microsoft Windows Server 2003 and
    --->> Microsoft Windows Server 2003 Service Pack 1 (SP1)
    --->> o 31=Microsoft Windows Server 2003 R2
    --->>
    --->> Note: The Adsiedit.exe utility and the Ldp.exe utility are included
    with
    --->> Windows Server 2003 R2 support tools. To install support tools, run
    --->> Suptools.msi from the \Support\Tools folder on installation disk 1.
    --->>
    --->> Hope this helps.
    --->>
    --->> Sincerely
    --->> Morgan Che
    --->> Microsoft Online Support
    --->> Microsoft Global Technical Support Center
    --->


  3. #18
    MWave6@gmail.com Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi Morgan,

    I ran schupgr and got the following response. Did this actually
    attempt to upgrade the schema again? Is there risk of potential damage
    by the DC attempting to upgrade itself like this?

    Also, under what circumstances is it appropriate to use schupgr.exe to
    upgrade the schema?


    D:\>schupgr
    Opened Connection to PC110
    SSPI Bind succeeded
    Current Schema Version is 31
    Upgrading schema to version 31
    Schema has already been changed in another DC in this enterprise and
    the changes
    are made to this DC. Rerun setup to upgrade this DC


    Thanks,
    Tom W.


    On Jun 25, 11:55 pm, v-mor...@online.microsoft.com (Morgan che(MSFT))
    wrote:

    > 3>Command line
    >
    > Alternatively, you can simply run Schupgr.exe on the computer you want to
    > check. You may receive an error message, but the third line does report the
    > current version number.


  4. #19
    Morgan che Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi,

    <Did this actually attempt to upgrade the schema again?>

    No, when you running Schupgr.exe, it just reports to you the current schema
    version.

    Form the output of Schupgr.exe, it indicates the current schema of the
    Windows server running this command is Windows server 2003 R2.

    <Is there risk of potential damageby the DC attempting to upgrade itself
    like this?
    under what circumstances is it appropriate to use schupgr.exe to upgrade
    the schema?>

    Normally, we use 'adprep /forestprep' command to extend schema, and 'adprep
    /forestprep' command will use the Schupgr.exe utility to implement schema
    additions. However, besides
    Upgrading schema, 'adprep /forestprep' also performs other more other 40
    operations, such as updating ACL, security descriptors etc, which
    Schupgr.exe can't realize.

    More information about ' the adprep /forestprep command', please refer to:

    Operations that are performed by the Adprep.exe utility when you add a
    Windows Server 2003 domain controller to a Windows 2000 domain or forest
    http://support.microsoft.com/kb/309628/en-us

    So, typically, we do not respectively use Schupgr.exe to extend schema.
    However, when we upgrade Windows 2000 servers from Bata to RC version, we
    use schupgr.exe to update schema version. More information, please refer to:

    HOW TO: Upgrade the Schema to Upgrade Domain Controllers to Released
    Version of Windows 2000

    http://support.microsoft.com/kb/240427/en-us

    Hope this helps.


    Sincerely
    Morgan Che
    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security
    =====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    =====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.


    --------------------
    --->From: MWave6@gmail.com
    --->Newsgroups: microsoft.public.windows.server.migration
    --->Subject: Re: ADPREP /forestprep failure - directory service busy
    --->Date: Fri, 27 Jun 2008 15:27:31 -0700 (PDT)
    --->Organization: http://groups.google.com
    --->Lines: 33
    --->Message-ID:
    <d0a7adad-a329-40e5-a3f0-6e757008a6d2@k30g2000hse.googlegroups.com>
    --->References: <4830932e$0$4109$4c368faf@roadrunner.com>
    <cPQE8cZuIHA.5796@TK2MSFTNGHUB02.phx.gbl>
    ---> <2b7a5238-c8cc-4f13-802b-d93398f2996d@k13g2000hse.googlegroups.com>
    ---> <fL6x$B01IHA.1788@TK2MSFTNGHUB02.phx.gbl>
    --->NNTP-Posting-Host: 207.59.155.242
    --->Mime-Version: 1.0
    --->Content-Type: text/plain; charset=ISO-8859-1
    --->Content-Transfer-Encoding: quoted-printable
    --->X-Trace: posting.google.com 1214605652 1969 127.0.0.1 (27 Jun 2008
    22:27:32 GMT)
    --->X-Complaints-To: groups-abuse@google.com
    --->NNTP-Posting-Date: Fri, 27 Jun 2008 22:27:32 +0000 (UTC)
    --->Complaints-To: groups-abuse@google.com
    --->Injection-Info: k30g2000hse.googlegroups.com;
    posting-host=207.59.155.242;
    ---> posting-account=S_PscgoAAADwKC66mgrYI_-_Wx_kveZF
    --->User-Agent: G2/1.0
    --->X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT
    ---> 5.0),gzip(gfe),gzip(gfe)
    --->Bytes: 2211
    --->Path:
    TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed0
    0.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!nntp.giganews.co
    m!postnews.google.com!k30g2000hse.googlegroups.com!not-for-mail
    --->Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.server.migration:3905
    --->X-Tomcat-NG: microsoft.public.windows.server.migration
    --->
    --->Hi Morgan,
    --->I ran schupgr and got the following response. Did this actually
    --->attempt to upgrade the schema again? Is there risk of potential damage
    --->by the DC attempting to upgrade itself like this?
    --->Also, under what circumstances is it appropriate to use schupgr.exe to
    --->upgrade the schema?
    --->D:\>schupgr
    --->Opened Connection to PC110
    --->SSPI Bind succeeded
    --->Current Schema Version is 31
    --->Upgrading schema to version 31
    --->Schema has already been changed in another DC in this enterprise and
    --->the changes
    ---> are made to this DC. Rerun setup to upgrade this DC
    --->Thanks,
    --->Tom W.
    --->On Jun 25, 11:55 pm, v-mor...@online.microsoft.com (Morgan che(MSFT))
    --->wrote:
    --->> 3>Command line
    --->>
    --->> Alternatively, you can simply run Schupgr.exe on the computer you
    want to
    --->> check. You may receive an error message, but the third line does
    report the
    --->> current version number.
    --->


  5. #20
    Morgan che Guest

    Re: ADPREP /forestprep failure - directory service busy

    HI,

    How is everything going?

    May i know if you have solve this problem? if there is any thing I can
    help, please post back.
    Sincerely
    Morgan Che
    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security
    =====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    =====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.


    --------------------
    --->From: MWave6@gmail.com
    --->Newsgroups: microsoft.public.windows.server.migration
    --->Subject: Re: ADPREP /forestprep failure - directory service busy
    --->Date: Fri, 27 Jun 2008 15:27:31 -0700 (PDT)
    --->Organization: http://groups.google.com
    --->Lines: 33
    --->Message-ID:
    <d0a7adad-a329-40e5-a3f0-6e757008a6d2@k30g2000hse.googlegroups.com>
    --->References: <4830932e$0$4109$4c368faf@roadrunner.com>
    <cPQE8cZuIHA.5796@TK2MSFTNGHUB02.phx.gbl>
    ---> <2b7a5238-c8cc-4f13-802b-d93398f2996d@k13g2000hse.googlegroups.com>
    ---> <fL6x$B01IHA.1788@TK2MSFTNGHUB02.phx.gbl>
    --->NNTP-Posting-Host: 207.59.155.242
    --->Mime-Version: 1.0
    --->Content-Type: text/plain; charset=ISO-8859-1
    --->Content-Transfer-Encoding: quoted-printable
    --->X-Trace: posting.google.com 1214605652 1969 127.0.0.1 (27 Jun 2008
    22:27:32 GMT)
    --->X-Complaints-To: groups-abuse@google.com
    --->NNTP-Posting-Date: Fri, 27 Jun 2008 22:27:32 +0000 (UTC)
    --->Complaints-To: groups-abuse@google.com
    --->Injection-Info: k30g2000hse.googlegroups.com;
    posting-host=207.59.155.242;
    ---> posting-account=S_PscgoAAADwKC66mgrYI_-_Wx_kveZF
    --->User-Agent: G2/1.0
    --->X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT
    ---> 5.0),gzip(gfe),gzip(gfe)
    --->Bytes: 2211
    --->Path:
    TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed0
    0.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!nntp.giganews.co
    m!postnews.google.com!k30g2000hse.googlegroups.com!not-for-mail
    --->Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.server.migration:3905
    --->X-Tomcat-NG: microsoft.public.windows.server.migration
    --->
    --->Hi Morgan,
    --->I ran schupgr and got the following response. Did this actually
    --->attempt to upgrade the schema again? Is there risk of potential damage
    --->by the DC attempting to upgrade itself like this?
    --->Also, under what circumstances is it appropriate to use schupgr.exe to
    --->upgrade the schema?
    --->D:\>schupgr
    --->Opened Connection to PC110
    --->SSPI Bind succeeded
    --->Current Schema Version is 31
    --->Upgrading schema to version 31
    --->Schema has already been changed in another DC in this enterprise and
    --->the changes
    ---> are made to this DC. Rerun setup to upgrade this DC
    --->Thanks,
    --->Tom W.
    --->On Jun 25, 11:55 pm, v-mor...@online.microsoft.com (Morgan che(MSFT))
    --->wrote:
    --->> 3>Command line
    --->>
    --->> Alternatively, you can simply run Schupgr.exe on the computer you
    want to
    --->> check. You may receive an error message, but the third line does
    report the
    --->> current version number.
    --->


  6. #21
    MWave6@gmail.com Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi Morgan,

    Thanks for keeping up!

    Actually, all of the forestprep, domainprep, and gpprep steps have
    completed properly. I have joined my Windows 2003 Server x64 system to
    our domain successfully.

    However, I now have a new problem. Several reboots after joining the
    domain, the "Network Connections" service will no longer start on this
    machine. I can't start it manually, it times out with an error code of
    1053. All network interfaces are gone from "My Network Places"
    properties.

    I've read several articles concerning 3rd-party management drivers. Do
    you have any suggestions? I certainly can't go live with this new
    server until I am convinced that the OS is reliable.


    Thanks Again,
    Tom W.


    On Jul 1, 11:31 pm, v-mor...@online.microsoft.com (Morgan che(MSFT))
    wrote:
    > HI,
    >
    > How is everything going?
    >
    > May i know if you have solve this problem? if there is any thing I can
    > help, please post back.
    > Sincerely
    > Morgan Che
    > Microsoft Online Support
    > Microsoft Global Technical Support Center


  7. #22
    Morgan che Guest

    Re: ADPREP /forestprep failure - directory service busy

    Hi,

    Thanks for the reply.

    Because we have resolved the original issue, for this new issue, in order
    to concentrate fully on each of these issues and provide clarity for others
    that may be following here, we ask that you post them as separate threads.
    Thank you for your patience and understanding.

    Here, I am also glad to provide my general suggestion here for your
    reference:

    As for error code '1053', you can read the following articles that would be
    helpful to troubleshoot this issue:

    You receive an "Error 1053: The service did not respond to the start or
    control request in a timely fashion" error message when a service that uses
    the local system account tries to start on a Windows Server 2003-based
    computer
    http://support.microsoft.com/kb/886695/en-us

    Event ID 1053 and 1058 appear in the Application log after you upgrade to
    Windows 2000 Server or Windows Server 2003 with Active Directory
    http://support.microsoft.com/kb/883271/en-us

    The Logical Disk Manager Administrative Service Hangs While It Is Starting
    http://support.microsoft.com/kb/307309/en-us

    Hope this helps. Have a good day.


    Sincerely
    Morgan Che
    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security
    =====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    =====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.


    --------------------
    --->From: MWave6@gmail.com
    --->Newsgroups: microsoft.public.windows.server.migration
    --->Subject: Re: ADPREP /forestprep failure - directory service busy
    --->Date: Sun, 6 Jul 2008 01:07:39 -0700 (PDT)
    --->Organization: http://groups.google.com
    --->Lines: 35
    --->Message-ID:
    <9ba7bdcb-c38f-490c-86fc-2b81a1a1974f@a70g2000hsh.googlegroups.com>
    --->References: <4830932e$0$4109$4c368faf@roadrunner.com>
    <cPQE8cZuIHA.5796@TK2MSFTNGHUB02.phx.gbl>
    ---> <d0a7adad-a329-40e5-a3f0-6e757008a6d2@k30g2000hse.googlegroups.com>
    ---> <TVhurQ$2IHA.2040@TK2MSFTNGHUB02.phx.gbl>
    --->NNTP-Posting-Host: 98.24.67.230
    --->Mime-Version: 1.0
    --->Content-Type: text/plain; charset=ISO-8859-1
    --->Content-Transfer-Encoding: quoted-printable
    --->X-Trace: posting.google.com 1215331659 6448 127.0.0.1 (6 Jul 2008
    08:07:39 GMT)
    --->X-Complaints-To: groups-abuse@google.com
    --->NNTP-Posting-Date: Sun, 6 Jul 2008 08:07:39 +0000 (UTC)
    --->Complaints-To: groups-abuse@google.com
    --->Injection-Info: a70g2000hsh.googlegroups.com;
    posting-host=98.24.67.230;
    ---> posting-account=S_PscgoAAADwKC66mgrYI_-_Wx_kveZF
    --->User-Agent: G2/1.0
    --->X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
    SV1;
    ---> Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR
    1.1.4322;
    ---> .NET CLR 2.0.50727; InfoPath.1),gzip(gfe),gzip(gfe)
    --->Bytes: 2491
    --->Path:
    TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!newsfeed0
    0.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!nntp.giganews.co
    m!postnews.google.com!a70g2000hsh.googlegroups.com!not-for-mail
    --->Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.server.migration:3947
    --->X-Tomcat-NG: microsoft.public.windows.server.migration
    --->
    --->Hi Morgan,
    --->Thanks for keeping up!
    --->Actually, all of the forestprep, domainprep, and gpprep steps have
    --->completed properly. I have joined my Windows 2003 Server x64 system to
    --->our domain successfully.
    --->However, I now have a new problem. Several reboots after joining the
    --->domain, the "Network Connections" service will no longer start on this
    --->machine. I can't start it manually, it times out with an error code of
    --->1053. All network interfaces are gone from "My Network Places"
    --->properties.
    --->I've read several articles concerning 3rd-party management drivers. Do
    --->you have any suggestions? I certainly can't go live with this new
    --->server until I am convinced that the OS is reliable.
    --->Thanks Again,
    --->Tom W.
    --->On Jul 1, 11:31 pm, v-mor...@online.microsoft.com (Morgan che(MSFT))
    --->wrote:
    --->> HI,
    --->>
    --->> How is everything going?
    --->>
    --->> May i know if you have solve this problem? if there is any thing I can
    --->> help, please post back.
    --->> Sincerely
    --->> Morgan Che
    --->> Microsoft Online Support
    --->> Microsoft Global Technical Support Center
    --->


Page 2 of 2 FirstFirst 12

Similar Threads

  1. Windows Server 2008 and adprep /forestprep
    By Agendum in forum Windows Server Help
    Replies: 7
    Last Post: 27-10-2011, 12:47 PM
  2. Adprep /forestprep - Run twice?
    By dflint in forum Windows Server Help
    Replies: 3
    Last Post: 30-04-2010, 11:07 PM
  3. Windows Server 2008 adprep /forestprep error 112
    By stillajl in forum Operating Systems
    Replies: 1
    Last Post: 27-04-2010, 10:50 AM
  4. Adprep /forestprep error
    By adrin in forum Active Directory
    Replies: 5
    Last Post: 11-09-2008, 11:38 AM
  5. ADPrep /forestprep failed 2000 to 2003 r2
    By Kelly in forum Active Directory
    Replies: 5
    Last Post: 10-09-2008, 05:19 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,721,730,912.06446 seconds with 17 queries