Results 1 to 4 of 4

Thread: IAS use authentication failure (Reason code=16)

  1. #1
    abeh555 Guest

    IAS use authentication failure (Reason code=16)

    I have just implemented an IAS server on a Windows 2k3 SP1 member server to authenticate VPN clients which connect to our firewall (NetScreen ns-25). Everything is OK except for the users whose password length is more than 15 characters. Following you can view the IAS log for such users

    Event Type: Warning
    Event Source: IAS
    Event Category: None
    Event ID: 2
    Date: 17/12/05
    Time: 1:42:21 PM
    User: N/A
    Computer: server
    Description:
    User test was denied access.
    Fully-Qualified-User-Name = ss\test
    NAS-IP-Address = 132.186.6.148
    NAS-Identifier = <not present>
    Called-Station-Identifier = <not present>
    Calling-Station-Identifier = <not present>
    Client-Friendly-Name = VPN-Remote
    Client-IP-Address = 132.186.6.148
    NAS-Port-Type = Virtual
    NAS-Port = 155
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = <undetermined>
    Authentication-Type = PAP
    EAP-Type = <undetermined>
    Reason-Code = 16
    Reason = Authentication was not successful because an unknown user name or
    incorrect password was used.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 2e 05 07 80 ...€

  2. #2
    Join Date
    Dec 2007
    Posts
    2

    IAS use Authentication faliure

    Upgrade to SP2 and check out MS KB article: http://support.microsoft.com/?id=893318

  3. #3
    Join Date
    Jul 2011
    Posts
    265

    Re: IAS use authentication failure (Reason code=16)

    To find out the issue you can just try to see how it works. I am giving you a link below that give you step by step detail about IAS Authentication and Authorization. Through which you can find where the chain breaks and you are unable to get proper output. The below link has a full diagram through which you can find out the problem. It is easy to understand. It is also good enough to troubleshoot a set of different problem you are facing in IAS authentication. I am not really aware about the direct solution, but I think this would help you to get better understanding of IAS Authentication.

    IAS Step-by-Step Authentication and Authorization

  4. #4
    Join Date
    Aug 2011
    Posts
    403

    Re: IAS use authentication failure (Reason code=16)

    Here is one link that give you more info on dealing with IAS. This link has a full set of different articles through which you can troubleshoot your problem. It help you to find out better solutions. You can check below different authentication articles to get more info on your issue. To get more details you can try using IAS event logging and Event Viewer. This tool give you the detail log report on your issue which is more proper to find out solution. First checkout the link below so that you can find out the actual cause of your problem.

    Troubleshooting IAS as a RADIUS server

Similar Threads

  1. Pre-Authentication Failure
    By samit in forum Active Directory
    Replies: 4
    Last Post: 06-01-2014, 10:35 AM
  2. Replies: 2
    Last Post: 16-03-2012, 01:46 PM
  3. Authentication failure in MTNL broadband
    By Victorious in forum India BroadBand
    Replies: 4
    Last Post: 25-01-2011, 07:18 AM
  4. System Failure: Stop error Reason Code: 0x805000f
    By Jamie in forum Windows Server Help
    Replies: 9
    Last Post: 17-09-2008, 01:08 PM
  5. AD 2003 Replication Failure/Authentication Failure
    By Nickason in forum Active Directory
    Replies: 1
    Last Post: 20-05-2005, 03:24 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,002,148.84496 seconds with 17 queries