Results 1 to 6 of 6

Thread: Server 2003 add user problem

  1. #1
    birdto Guest

    Server 2003 add user problem

    Hi All,

    I have a problem in adding a user in my AD.

    I have a single AD and have 2 DC on it. 2 of them are Windows 2003
    Server.

    When I try to add a user in one of the DC, which should be the first DC in
    the AD, the user added cannot be shown in the next DC.

    Besides, when I try to add an user in another DC, the following message
    shown:
    "Windows cannot verify that the user name is unique because the following
    error occured while contacting the global catalog: The server is not
    operational.
    Windows will create this user account, but the user can log on only after
    the user name is verified to be unique. Make sure the global is available.



  2. #2
    Steve Duff [MVP] Guest

    Re: Server 2003 add user problem

    What you are seeing is a symptom of something much more
    serious that is broken in Active Directory replication between
    your domain controllers. You need to fix this.

    It is almost impossible to give you any specifics, because there
    are so many ways for AD to break.

    If you look in the system and FRS event logs on both DCs you no doubt will
    see a lot of errors invoving AD and replication. Posting these would help
    us figure out where your problem could be.

    A few general ideas:

    1) Make sure the time and time zone are set correctly and
    are in sync with each other on the two DCs.

    2) Go in to AD Sites and services and make sure there
    is a functional replication path established between the two
    DCs if they are in different sites. You probably want to make
    both DCs global catalog servers, but I don't recommend that
    you make any change like that at this time as it might make
    your problem harder to figure out.

    3) Run a netdiag /fix and a dcdiag /fix on both servers
    (if these are not already on your servers then you can install them
    from the \tools folder on the CD.) If a second pass of a /fix
    is not reasonably clean, then something is wrong in
    the AD configuration, and the log from these also will help figure
    out your problem.

    Steve Duff, MCSE, MVP
    Ergodic Systems, Inc.

    "birdto" <birdto@mail.hongkong.com> wrote in message news:eGnBi$KuEHA.3392@TK2MSFTNGP10.phx.gbl...
    > Hi All,
    >
    > I have a problem in adding a user in my AD.
    >
    > I have a single AD and have 2 DC on it. 2 of them are Windows 2003
    > Server.
    >
    > When I try to add a user in one of the DC, which should be the first DC in
    > the AD, the user added cannot be shown in the next DC.
    >
    > Besides, when I try to add an user in another DC, the following message
    > shown:
    > "Windows cannot verify that the user name is unique because the following
    > error occured while contacting the global catalog: The server is not
    > operational.
    > Windows will create this user account, but the user can log on only after
    > the user name is verified to be unique. Make sure the global is available.
    >
    >




  3. #3
    birdto Guest

    Re: Server 2003 add user problem

    Thanks.

    When I try to run "dcdiag /v" in my first DC, it shown the following error
    message:-

    Testing server: Default-First-Site\WCLSERVER
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    The host 1a4da01a-6b3a-4dd4-9682-f1081898142d._msdcs.Wclnet.local
    could not be resolved to an
    IP address. Check the DNS server, DHCP, server name, etc
    Although the Guid DNS name

    (1a4da01a-6b3a-4dd4-9682-f1081898142d._msdcs.Wclnet.local)

    couldn't be resolved, the server name

    (wclserver.Wclnet.local) resolved to the IP address

    (192.168.0.11) and was pingable. Check that the IP address is

    registered correctly with the DNS server.
    ......................... WCLSERVER failed test Connectivity

    What should be the problem of it?

    "Steve Duff [MVP]" <ergodic@ergodic-systems.com> ¼¶¼g©ó¶l¥ó·s»D:ewJ7fkLuEHA.1280@TK2MSFTNGP10.phx.gbl...
    > What you are seeing is a symptom of something much more
    > serious that is broken in Active Directory replication between
    > your domain controllers. You need to fix this.
    >
    > It is almost impossible to give you any specifics, because there
    > are so many ways for AD to break.
    >
    > If you look in the system and FRS event logs on both DCs you no doubt will
    > see a lot of errors invoving AD and replication. Posting these would help
    > us figure out where your problem could be.
    >
    > A few general ideas:
    >
    > 1) Make sure the time and time zone are set correctly and
    > are in sync with each other on the two DCs.
    >
    > 2) Go in to AD Sites and services and make sure there
    > is a functional replication path established between the two
    > DCs if they are in different sites. You probably want to make
    > both DCs global catalog servers, but I don't recommend that
    > you make any change like that at this time as it might make
    > your problem harder to figure out.
    >
    > 3) Run a netdiag /fix and a dcdiag /fix on both servers
    > (if these are not already on your servers then you can install them
    > from the \tools folder on the CD.) If a second pass of a /fix
    > is not reasonably clean, then something is wrong in
    > the AD configuration, and the log from these also will help figure
    > out your problem.
    >
    > Steve Duff, MCSE, MVP
    > Ergodic Systems, Inc.
    >
    > "birdto" <birdto@mail.hongkong.com> wrote in message
    > news:eGnBi$KuEHA.3392@TK2MSFTNGP10.phx.gbl...
    >> Hi All,
    >>
    >> I have a problem in adding a user in my AD.
    >>
    >> I have a single AD and have 2 DC on it. 2 of them are Windows 2003
    >> Server.
    >>
    >> When I try to add a user in one of the DC, which should be the first DC
    >> in
    >> the AD, the user added cannot be shown in the next DC.
    >>
    >> Besides, when I try to add an user in another DC, the following message
    >> shown:
    >> "Windows cannot verify that the user name is unique because the
    >> following
    >> error occured while contacting the global catalog: The server is not
    >> operational.
    >> Windows will create this user account, but the user can log on only
    >> after
    >> the user name is verified to be unique. Make sure the global is
    >> available.
    >>
    >>

    >
    >




  4. #4
    Steve Duff [MVP] Guest

    Re: Server 2003 add user problem

    You have a DNS problem with names that
    should be registered for your domain.

    A netdiag /fix should have re-registered all the
    names correctly in the DNS server, so the
    fact that they aren't there means your configuration
    is broken.

    Take a look at your DNS zones. You should have
    a zone named _mscds.wcinet.local. In that
    zone should be a CNAME for the "1a4da01a-..."
    name that aliases to the DC.

    What the connectivity test is telling you is that
    it can't find that name, or that it's CNAME alias
    doesn't resolve. This should be fairly easy to trace
    back manually to find the cause since a netdiag /fix
    should register it.

    So make sure you are pointing to the right
    DNS server, that it is reachable, that
    dynamic updates are enabled on all its zones,
    and -- after checking those things -- that you've run
    a netdiag /fix and a dcdiag /fix. If you do these
    things, the names will show up.

    The other possibility is that there is some sort
    of deeper replication problem. But these also are
    typically related to DNS problems too, in a
    chicken-and-egg kind of way.

    The best way to eliminate this from the diagnostic
    process is to temporarily point all servers to just
    one of the DC's for DNS. Once this config. is working,
    simply tear down and re-enable AD-integrated DNS
    on the other server(s) and replication takes care
    of the rest.

    And again, be sure to double-check time sync and time
    zones on both servers. Any serious misadjustment
    of time can wreak havoc on replication.

    Steve Duff, MCSE, MVP
    Ergodic Systems, Inc.


    "birdto" <birdto@mail.hongkong.com> wrote in message news:OcQdbuYuEHA.3320@TK2MSFTNGP15.phx.gbl...
    > Thanks.
    >
    > When I try to run "dcdiag /v" in my first DC, it shown the following error
    > message:-
    >
    > Testing server: Default-First-Site\WCLSERVER
    > Starting test: Connectivity
    > * Active Directory LDAP Services Check
    > The host 1a4da01a-6b3a-4dd4-9682-f1081898142d._msdcs.Wclnet.local
    > could not be resolved to an
    > IP address. Check the DNS server, DHCP, server name, etc
    > Although the Guid DNS name
    >
    > (1a4da01a-6b3a-4dd4-9682-f1081898142d._msdcs.Wclnet.local)
    >
    > couldn't be resolved, the server name
    >
    > (wclserver.Wclnet.local) resolved to the IP address
    >
    > (192.168.0.11) and was pingable. Check that the IP address is
    >
    > registered correctly with the DNS server.
    > ......................... WCLSERVER failed test Connectivity
    >
    > What should be the problem of it?
    >
    > "Steve Duff [MVP]" <ergodic@ergodic-systems.com> ¼¶¼g©ó¶l¥ó·s»D:ewJ7fkLuEHA.1280@TK2MSFTNGP10.phx.gbl...
    > > What you are seeing is a symptom of something much more
    > > serious that is broken in Active Directory replication between
    > > your domain controllers. You need to fix this.
    > >
    > > It is almost impossible to give you any specifics, because there
    > > are so many ways for AD to break.
    > >
    > > If you look in the system and FRS event logs on both DCs you no doubt will
    > > see a lot of errors invoving AD and replication. Posting these would help
    > > us figure out where your problem could be.
    > >
    > > A few general ideas:
    > >
    > > 1) Make sure the time and time zone are set correctly and
    > > are in sync with each other on the two DCs.
    > >
    > > 2) Go in to AD Sites and services and make sure there
    > > is a functional replication path established between the two
    > > DCs if they are in different sites. You probably want to make
    > > both DCs global catalog servers, but I don't recommend that
    > > you make any change like that at this time as it might make
    > > your problem harder to figure out.
    > >
    > > 3) Run a netdiag /fix and a dcdiag /fix on both servers
    > > (if these are not already on your servers then you can install them
    > > from the \tools folder on the CD.) If a second pass of a /fix
    > > is not reasonably clean, then something is wrong in
    > > the AD configuration, and the log from these also will help figure
    > > out your problem.
    > >
    > > Steve Duff, MCSE, MVP
    > > Ergodic Systems, Inc.
    > >
    > > "birdto" <birdto@mail.hongkong.com> wrote in message
    > > news:eGnBi$KuEHA.3392@TK2MSFTNGP10.phx.gbl...
    > >> Hi All,
    > >>
    > >> I have a problem in adding a user in my AD.
    > >>
    > >> I have a single AD and have 2 DC on it. 2 of them are Windows 2003
    > >> Server.
    > >>
    > >> When I try to add a user in one of the DC, which should be the first DC
    > >> in
    > >> the AD, the user added cannot be shown in the next DC.
    > >>
    > >> Besides, when I try to add an user in another DC, the following message
    > >> shown:
    > >> "Windows cannot verify that the user name is unique because the
    > >> following
    > >> error occured while contacting the global catalog: The server is not
    > >> operational.
    > >> Windows will create this user account, but the user can log on only
    > >> after
    > >> the user name is verified to be unique. Make sure the global is
    > >> available.
    > >>
    > >>

    > >
    > >

    >
    >




  5. #5
    Join Date
    Aug 2008
    Posts
    1

    Question

    Hi I am having issues with adding new user to my work server!! I have never dealt with servers before and my boss gave me this server to work with but when i try to add new user it gives me error sayign DNS is not registered!! So I followed dcdiag/v and it failed connectivity test so ran netdiag /fix and this is wat i get :

    Doing initial required tests

    Testing server: Default-First-Site-Name\PBSERVER
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    The host afed4542-62e3-4db3-912c-5a73b2a3862e._msdcs.pbsc.local could n
    ot be resolved to an
    IP address. Check the DNS server, DHCP, server name, etc
    Although the Guid DNS name
    (afed4542-62e3-4db3-912c-5a73b2a3862e._msdcs.pbsc.local) couldn't be
    resolved, the server name (pbserver.pbsc.local) resolved to the IP
    address (192.168.0.0) and was pingable. Check that the IP address is
    registered correctly with the DNS server.
    ......................... PBSERVER failed test Connectivity

    Doing primary tests

    Testing server: Default-First-Site-Name\PBSERVER
    Skipping all tests, because server PBSERVER is
    not responding to directory service requests
    Test omitted by user request: Topology
    Test omitted by user request: CutoffServers
    Test omitted by user request: OutboundSecureChannels
    Test omitted by user request: VerifyReplicas
    Test omitted by user request: VerifyEnterpriseReferences
    Test omitted by user request: CheckSecurityError

    Running partition tests on : ForestDnsZones
    Starting test: CrossRefValidation
    ......................... ForestDnsZones passed test CrossRefValidation

    Starting test: CheckSDRefDom
    ......................... ForestDnsZones passed test CheckSDRefDom

    Running partition tests on : DomainDnsZones
    Starting test: CrossRefValidation
    ......................... DomainDnsZones passed test CrossRefValidation

    Starting test: CheckSDRefDom
    ......................... DomainDnsZones passed test CheckSDRefDom

    Running partition tests on : Schema
    Starting test: CrossRefValidation
    ......................... Schema passed test CrossRefValidation
    Starting test: CheckSDRefDom
    ......................... Schema passed test CheckSDRefDom

    Running partition tests on : Configuration
    Starting test: CrossRefValidation
    ......................... Configuration passed test CrossRefValidation
    Starting test: CheckSDRefDom
    ......................... Configuration passed test CheckSDRefDom

    Running partition tests on : pbsc
    Starting test: CrossRefValidation
    ......................... pbsc passed test CrossRefValidation
    Starting test: CheckSDRefDom
    ......................... pbsc passed test CheckSDRefDom

    Running enterprise tests on : pbsc.local
    Starting test: Intersite
    Skipping site Default-First-Site-Name, this site is outside the scope
    provided by the command line arguments provided.
    ......................... pbsc.local passed test Intersite
    Starting test: FsmoCheck
    GC Name: \\pbserver.pbsc.local
    Locator Flags: 0xe00003fd
    PDC Name: \\pbserver.pbsc.local
    Locator Flags: 0xe00003fd
    Time Server Name: \\pbserver.pbsc.local
    Locator Flags: 0xe00003fd
    Preferred Time Server Name: \\pbserver.pbsc.local
    Locator Flags: 0xe00003fd
    KDC Name: \\pbserver.pbsc.local
    Locator Flags: 0xe00003fd
    ......................... pbsc.local passed test FsmoCheck
    Test omitted by user request: DNS
    Test omitted by user request: DNS

    C:\Documents and Settings\Administrator>netdiag /fix

    .........................................

    Computer Name: PBSERVER
    DNS Host Name: pbserver.pbsc.local
    System info : Microsoft Windows Server 2003 (Build 3790)
    Processor : x86 Family 15 Model 2 Stepping 9, GenuineIntel
    List of installed hotfixes :
    KB911164
    Q147222


    Netcard queries test . . . . . . . : Passed
    [WARNING] The net card '1394 Net Adapter' may not be working because it has
    not received any packets.
    [WARNING] The net card 'Microsoft Tun Miniport Adapter' may not be working.



    Per interface results:

    Adapter : Server Local Area Connection

    Netcard queries test . . . : Passed

    Host Name. . . . . . . . . : pbserver.home
    IP Address . . . . . . . . : 192.168.0.0
    Subnet Mask. . . . . . . . : 255.255.255.0
    Default Gateway. . . . . . : 192.168.0.0
    Primary WINS Server. . . . : 192.168.0.0
    Dns Servers. . . . . . . . : 192.168.0.0

    IpConfig results . . . . . : Failed
    Pinging the Primary WINS server 192.168.0.0 - not reachable

    AutoConfiguration results. . . . . . : Passed

    Default gateway test . . . : Passed

    NetBT name test. . . . . . : Passed
    [WARNING] At least one of the <00> 'WorkStation Service', <03> 'Messenge
    r Service', <20> 'WINS' names is missing.
    No remote names have been found.

    WINS service test. . . . . : Failed
    The test failed. We were unable to query the WINS servers.


    Global results:


    Domain membership test . . . . . . : Passed


    NetBT transports test. . . . . . . : Passed
    List of NetBt transports currently configured:
    NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    1 NetBt transport currently configured.


    Autonet address test . . . . . . . : Passed


    IP loopback ping test. . . . . . . : Passed


    Default gateway test . . . . . . . : Passed


    NetBT name test. . . . . . . . . . : Passed
    [WARNING] You don't have a single interface with the <00> 'WorkStation Servi
    ce', <03> 'Messenger Service', <20> 'WINS' names defined.


    Winsock test . . . . . . . . . . . : Passed


    DNS test . . . . . . . . . . . . . : Failed
    [WARNING] Cannot find a primary authoritative DNS server for the name
    'pbserver.pbsc.local.'. [WSAEADDRNOTAVAIL ]
    The name 'pbserver.pbsc.local.' may not be registered in DNS.
    [WARNING] Cannot find a primary authoritative DNS server for the name
    'pbserver.pbsc.local.'. [ERROR_TIMEOUT]
    The name 'pbserver.pbsc.local.' may not be registered in DNS.
    [WARNING] Cannot find a primary authoritative DNS server for the name
    'pbserver.pbsc.local.'. [WSAEADDRNOTAVAIL ]
    The name 'pbserver.pbsc.local.' may not be registered in DNS.
    [WARNING] Cannot find a primary authoritative DNS server for the name
    'pbserver.home.'. [WSAEADDRNOTAVAIL ]
    The name 'pbserver.home.' may not be registered in DNS.
    [WARNING] Cannot find a primary authoritative DNS server for the name
    'pbserver.pbsc.local.'. [ERROR_TIMEOUT]
    The name 'pbserver.pbsc.local.' may not be registered in DNS.
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.pbsc.local. re-registeration
    on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.Default-First-Site-Name._site
    s.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.pdc._msdcs.pbsc.local. re-reg
    isteration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.gc._msdcs.pbsc.local. re-regi
    steration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.Default-First-Site-Name._site
    s.gc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.90b3879e-d872-4f0d-a875-e0f48
    c90e89c.domains._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0' fail
    ed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry afed4542-62e3-4db3-912c-5a73b2a3862e._ms
    dcs.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kerberos._tcp.dc._msdcs.pbsc.local. re-
    registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kerberos._tcp.Default-First-Site-Name._
    sites.dc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.dc._msdcs.pbsc.local. re-regi
    steration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.Default-First-Site-Name._site
    s.dc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kerberos._tcp.pbsc.local. re-registerat
    ion on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kerberos._tcp.Default-First-Site-Name._
    sites.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _gc._tcp.pbsc.local. re-registeration on
    DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _gc._tcp.Default-First-Site-Name._sites.
    pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kerberos._udp.pbsc.local. re-registerat
    ion on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kpasswd._tcp.pbsc.local. re-registerati
    on on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _kpasswd._udp.pbsc.local. re-registerati
    on on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.DomainDnsZones.pbsc.local. re
    -registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.Default-First-Site-Name._site
    s.DomainDnsZones.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.ForestDnsZones.pbsc.local. re
    -registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry _ldap._tcp.Default-First-Site-Name._site
    s.ForestDnsZones.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry pbsc.local. re-registeration on DNS serv
    er '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry gc._msdcs.pbsc.local. re-registeration o
    n DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry ForestDnsZones.pbsc.local. re-registerat
    ion on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Failed to fix: DC DNS entry DomainDnsZones.pbsc.local. re-registerat
    ion on DNS server '0.0.0.0' failed.
    DNS Error code: 0x00002741
    [FATAL] Fix Failed: netdiag failed to re-register missing DNS entries for th
    is DC on DNS server '0.0.0.0'.
    [FATAL] No DNS servers have the DNS records for this DC registered.


    Redir and Browser test . . . . . . : Passed
    List of NetBt transports currently bound to the Redir
    NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    The redir is bound to 1 NetBt transport.

    List of NetBt transports currently bound to the browser
    NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    The browser is bound to 1 NetBt transport.


    DC discovery test. . . . . . . . . : Passed


    DC list test . . . . . . . . . . . : Passed


    Trust relationship test. . . . . . : Skipped


    Kerberos test. . . . . . . . . . . : Passed


    LDAP test. . . . . . . . . . . . . : Passed


    Bindings test. . . . . . . . . . . : Passed


    WAN configuration test . . . . . . : Skipped
    No active remote access connections.


    Modem diagnostics test . . . . . . : Passed

    IP Security test . . . . . . . . . : Skipped

    Note: run "netsh ipsec dynamic show /?" for more detailed information


    The command completed successfully
    Please some one can explain what this crap means ???????

    Thanks
    alliesv

  6. #6
    Hikmat Kanaan Guest

    Re: Server 2003 add user problem

    Hi, man
    your server is using 192.168.0.0 IP address this is an invalid IP address
    you can not use such IP address
    Change your server IP to 192.168.0.1 for example or any failed IP

    "alliesv" <alliesv.3eexvc@DoNotSpam.com> wrote in message
    news:alliesv.3eexvc@DoNotSpam.com...
    >
    > Hi I am having issues with adding new user to my work server!! I have
    > never dealt with servers before and my boss gave me this server to work
    > with but when i try to add new user it gives me *error* sayign DNS is
    > not registered!! So I followed dcdiag/v and it failed connectivity test
    > so ran netdiag /fix and this is wat i get :
    >
    > Doing initial required tests
    >
    > Testing server: Default-First-Site-Name\PBSERVER
    > Starting test: Connectivity
    > * Active Directory LDAP Services Check
    > The host
    > afed4542-62e3-4db3-912c-5a73b2a3862e._msdcs.pbsc.local could n
    > ot be resolved to an
    > IP address. Check the DNS server, DHCP, server name, etc
    > Although the Guid DNS name
    > (afed4542-62e3-4db3-912c-5a73b2a3862e._msdcs.pbsc.local)
    > couldn't be
    > resolved, the server name (pbserver.pbsc.local) resolved to
    > the IP
    > address (192.168.0.0) and was pingable. Check that the IP
    > address is
    > registered correctly with the DNS server.
    > ........................ PBSERVER failed test Connectivity
    >
    > Doing primary tests
    >
    > Testing server: Default-First-Site-Name\PBSERVER
    > Skipping all tests, because server PBSERVER is
    > not responding to directory service requests
    > Test omitted by user request: Topology
    > Test omitted by user request: CutoffServers
    > Test omitted by user request: OutboundSecureChannels
    > Test omitted by user request: VerifyReplicas
    > Test omitted by user request: VerifyEnterpriseReferences
    > Test omitted by user request: CheckSecurityError
    >
    > Running partition tests on : ForestDnsZones
    > Starting test: CrossRefValidation
    > ........................ ForestDnsZones passed test
    > CrossRefValidation
    >
    > Starting test: CheckSDRefDom
    > ........................ ForestDnsZones passed test
    > CheckSDRefDom
    >
    > Running partition tests on : DomainDnsZones
    > Starting test: CrossRefValidation
    > ........................ DomainDnsZones passed test
    > CrossRefValidation
    >
    > Starting test: CheckSDRefDom
    > ........................ DomainDnsZones passed test
    > CheckSDRefDom
    >
    > Running partition tests on : Schema
    > Starting test: CrossRefValidation
    > ........................ Schema passed test
    > CrossRefValidation
    > Starting test: CheckSDRefDom
    > ........................ Schema passed test CheckSDRefDom
    >
    > Running partition tests on : Configuration
    > Starting test: CrossRefValidation
    > ........................ Configuration passed test
    > CrossRefValidation
    > Starting test: CheckSDRefDom
    > ........................ Configuration passed test
    > CheckSDRefDom
    >
    > Running partition tests on : pbsc
    > Starting test: CrossRefValidation
    > ........................ pbsc passed test CrossRefValidation
    > Starting test: CheckSDRefDom
    > ........................ pbsc passed test CheckSDRefDom
    >
    > Running enterprise tests on : pbsc.local
    > Starting test: Intersite
    > Skipping site Default-First-Site-Name, this site is outside
    > the scope
    > provided by the command line arguments provided.
    > ........................ pbsc.local passed test Intersite
    > Starting test: FsmoCheck
    > GC Name: \\pbserver.pbsc.local
    > Locator Flags: 0xe00003fd
    > PDC Name: \\pbserver.pbsc.local
    > Locator Flags: 0xe00003fd
    > Time Server Name: \\pbserver.pbsc.local
    > Locator Flags: 0xe00003fd
    > Preferred Time Server Name: \\pbserver.pbsc.local
    > Locator Flags: 0xe00003fd
    > KDC Name: \\pbserver.pbsc.local
    > Locator Flags: 0xe00003fd
    > ........................ pbsc.local passed test FsmoCheck
    > Test omitted by user request: DNS
    > Test omitted by user request: DNS
    >
    > C:\Documents and Settings\Administrator>netdiag /fix
    >
    > ........................................
    >
    > Computer Name: PBSERVER
    > DNS Host Name: pbserver.pbsc.local
    > System info : Microsoft Windows Server 2003 (Build 3790)
    > Processor : x86 Family 15 Model 2 Stepping 9, GenuineIntel
    > List of installed hotfixes :
    > KB911164
    > Q147222
    >
    >
    > Netcard queries test . . . . . . . : Passed
    > [WARNING] The net card '1394 Net Adapter' may not be working
    > because it has
    > not received any packets.
    > [WARNING] The net card 'Microsoft Tun Miniport Adapter' may not be
    > working.
    >
    >
    >
    > Per interface results:
    >
    > Adapter : Server Local Area Connection
    >
    > Netcard queries test . . . : Passed
    >
    > Host Name. . . . . . . . . : pbserver.home
    > IP Address . . . . . . . . : 192.168.0.0
    > Subnet Mask. . . . . . . . : 255.255.255.0
    > Default Gateway. . . . . . : 192.168.0.0
    > Primary WINS Server. . . . : 192.168.0.0
    > Dns Servers. . . . . . . . : 192.168.0.0
    >
    > IpConfig results . . . . . : Failed
    > Pinging the Primary WINS server 192.168.0.0 - not
    > reachable
    >
    > AutoConfiguration results. . . . . . : Passed
    >
    > Default gateway test . . . : Passed
    >
    > NetBT name test. . . . . . : Passed
    > [WARNING] At least one of the <00> 'WorkStation Service', <03>
    > 'Messenge
    > r Service', <20> 'WINS' names is missing.
    > No remote names have been found.
    >
    > WINS service test. . . . . : Failed
    > The test failed. We were unable to query the WINS
    > servers.
    >
    >
    > Global results:
    >
    >
    > Domain membership test . . . . . . : Passed
    >
    >
    > NetBT transports test. . . . . . . : Passed
    > List of NetBt transports currently configured:
    > NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    > 1 NetBt transport currently configured.
    >
    >
    > Autonet address test . . . . . . . : Passed
    >
    >
    > IP loopback ping test. . . . . . . : Passed
    >
    >
    > Default gateway test . . . . . . . : Passed
    >
    >
    > NetBT name test. . . . . . . . . . : Passed
    > [WARNING] You don't have a single interface with the <00>
    > 'WorkStation Servi
    > ce', <03> 'Messenger Service', <20> 'WINS' names defined.
    >
    >
    > Winsock test . . . . . . . . . . . : Passed
    >
    >
    > DNS test . . . . . . . . . . . . . : Failed
    > [WARNING] Cannot find a primary authoritative DNS server for
    > the name
    > 'pbserver.pbsc.local.'. [WSAEADDRNOTAVAIL ]
    > The name 'pbserver.pbsc.local.' may not be registered in
    > DNS.
    > [WARNING] Cannot find a primary authoritative DNS server for
    > the name
    > 'pbserver.pbsc.local.'. [ERROR_TIMEOUT]
    > The name 'pbserver.pbsc.local.' may not be registered in
    > DNS.
    > [WARNING] Cannot find a primary authoritative DNS server for
    > the name
    > 'pbserver.pbsc.local.'. [WSAEADDRNOTAVAIL ]
    > The name 'pbserver.pbsc.local.' may not be registered in
    > DNS.
    > [WARNING] Cannot find a primary authoritative DNS server for
    > the name
    > 'pbserver.home.'. [WSAEADDRNOTAVAIL ]
    > The name 'pbserver.home.' may not be registered in DNS.
    > [WARNING] Cannot find a primary authoritative DNS server for
    > the name
    > 'pbserver.pbsc.local.'. [ERROR_TIMEOUT]
    > The name 'pbserver.pbsc.local.' may not be registered in
    > DNS.
    > [FATAL] Failed to fix: DC DNS entry _ldap._tcp.pbsc.local.
    > re-registeration
    > on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.Default-First-Site-Name._site
    > s.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.pdc._msdcs.pbsc.local. re-reg
    > isteration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.gc._msdcs.pbsc.local. re-regi
    > steration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.Default-First-Site-Name._site
    > s.gc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0'
    > failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.90b3879e-d872-4f0d-a875-e0f48
    > c90e89c.domains._msdcs.pbsc.local. re-registeration on DNS server
    > '0.0.0.0' fail
    > ed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > afed4542-62e3-4db3-912c-5a73b2a3862e._ms
    > dcs.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _kerberos._tcp.dc._msdcs.pbsc.local. re-
    > registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _kerberos._tcp.Default-First-Site-Name._
    > sites.dc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0'
    > failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.dc._msdcs.pbsc.local. re-regi
    > steration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.Default-First-Site-Name._site
    > s.dc._msdcs.pbsc.local. re-registeration on DNS server '0.0.0.0'
    > failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry _kerberos._tcp.pbsc.local.
    > re-registerat
    > ion on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _kerberos._tcp.Default-First-Site-Name._
    > sites.pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry _gc._tcp.pbsc.local.
    > re-registeration on
    > DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _gc._tcp.Default-First-Site-Name._sites.
    > pbsc.local. re-registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry _kerberos._udp.pbsc.local.
    > re-registerat
    > ion on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry _kpasswd._tcp.pbsc.local.
    > re-registerati
    > on on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry _kpasswd._udp.pbsc.local.
    > re-registerati
    > on on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.DomainDnsZones.pbsc.local. re
    > -registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.Default-First-Site-Name._site
    > s.DomainDnsZones.pbsc.local. re-registeration on DNS server '0.0.0.0'
    > failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.ForestDnsZones.pbsc.local. re
    > -registeration on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry
    > _ldap._tcp.Default-First-Site-Name._site
    > s.ForestDnsZones.pbsc.local. re-registeration on DNS server '0.0.0.0'
    > failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry pbsc.local. re-registeration on
    > DNS serv
    > er '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry gc._msdcs.pbsc.local.
    > re-registeration o
    > n DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry ForestDnsZones.pbsc.local.
    > re-registerat
    > ion on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Failed to fix: DC DNS entry DomainDnsZones.pbsc.local.
    > re-registerat
    > ion on DNS server '0.0.0.0' failed.
    > DNS Error code: 0x00002741
    > [FATAL] Fix Failed: netdiag failed to re-register missing DNS
    > entries for th
    > is DC on DNS server '0.0.0.0'.
    > [FATAL] No DNS servers have the DNS records for this DC
    > registered.
    >
    >
    > Redir and Browser test . . . . . . : Passed
    > List of NetBt transports currently bound to the Redir
    > NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    > The redir is bound to 1 NetBt transport.
    >
    > List of NetBt transports currently bound to the browser
    > NetBT_Tcpip_{26C7FCF2-04BE-455A-A570-B337A686F300}
    > The browser is bound to 1 NetBt transport.
    >
    >
    > DC discovery test. . . . . . . . . : Passed
    >
    >
    > DC list test . . . . . . . . . . . : Passed
    >
    >
    > Trust relationship test. . . . . . : Skipped
    >
    >
    > Kerberos test. . . . . . . . . . . : Passed
    >
    >
    > LDAP test. . . . . . . . . . . . . : Passed
    >
    >
    > Bindings test. . . . . . . . . . . : Passed
    >
    >
    > WAN configuration test . . . . . . : Skipped
    > No active remote access connections.
    >
    >
    > Modem diagnostics test . . . . . . : Passed
    >
    > IP Security test . . . . . . . . . : Skipped
    >
    > Note: run "netsh ipsec dynamic show /?" for more detailed
    > information
    >
    >
    > The command completed successfully
    > PLEASE SOME ONE CAN EXPLAIN WHAT THIS CRAP MEANS
    > ???????
    >
    > Thanks
    > alliesv
    >
    >
    > --
    > alliesv
    > ------------------------------------------------------------------------
    > alliesv's Profile: http://forums.techarena.in/members/alliesv.htm
    > View this thread: Server 2003 add user problem
    >
    > http://forums.techarena.in
    >


Similar Threads

  1. Replies: 5
    Last Post: 22-08-2010, 02:39 AM
  2. How to change a user login id in Windows Server 2003
    By !const in forum Windows Software
    Replies: 3
    Last Post: 22-07-2009, 12:07 AM
  3. user account problems in windows server 2003
    By abishek 001 in forum Operating Systems
    Replies: 3
    Last Post: 13-03-2009, 07:09 PM
  4. Active Directory user missing in Server 2003
    By Solaris in forum Operating Systems
    Replies: 3
    Last Post: 01-08-2008, 02:14 PM
  5. MMC 3.0 user snap-in error (windows server 2003, exchange server 2
    By RonnyEhv1982 in forum Windows Server Help
    Replies: 1
    Last Post: 15-03-2008, 12:15 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,714,296,154.66751 seconds with 17 queries