Q. Can I setup my VPN client as a router to direct all local computers traffic to the VPN.
ANS: No, you need to setup site to site VPN.
Q. Can not ping computer name when using VPN.
ANS. If you have the issue, when name resolution after using VPN PPTP filtering. If you disable UDP ports 137 and 138 or TCP port 139, NetBIOS packets can not pass through the Network. You need to enable also thesis of all ports and firewalls, routers that are between the client & the server for unicast (point-to-point) traffic.
Q. Configure RRAS tracing.
ANS. When you need to Monitor the activities of RRA and Dial-Up Networking components, use the functionality to organize tracing RRA and Dial-Up Networking components to log tracing information to a file. You can assemble RRA and Dial-Up Networking tracing obtainable by any configuring the registry Gold using the netsh command.
Q. How to add DNS and WINS into your Cisco VPN server.
ANS. If your VPN client cannot locate servers cannot ping computername gold, you may necessitate to include DNS and WINS into your VPN server. For example, to adjoin DNS and WINS were Cisco PIX Firewall, affix VPDN group 1 client configuation dns and dnsservername VPDN group 1 client configuration wins winsservername.
Q. How to assign a static IP to VPN client.
ANS. If you are working on Windows 2003 server as VPN server, you-can allocate a static IP under user's properties. If you make use of other Windows OS having VPN server, you might have to generate a DHCP reservation.
Q. How to connect to a Windows domain using Windows VPN at startup.
ANS. If you are working on Windows 2000/Windows XP pro setup for a domain controller, you will have an alternative to log on using dial-up connection on logon screen after generating a VPN / dial-up connection. In the Log on to Windows dialog box, choose the User Cdn the Log via dial-up connection check box. After Clicking OK, the user is prompted to decide a network connection.
Q. How to configure VPN Packet Filters.
ANS. When you setup the RRAS, a set of default Input and Output Filters on the external VPN server adapt on the will be created. If you aren’t running your server in a protected environment highly, you can contentedly place the server firewall restrict incoming VPN traffic to PPTP packets only. To display and humiliate thesis filters, go to Routing and Remote Access> IP Routing> General, and then you can Add or Edit the packet filters Dedicated of the Local Area Connection. Or to enable PPTP filtering from Control Panel, select the Network applet, Protocols, TCP / IP Protocols, the WAN adapt, Advanced. Then, select Enable PPTP Filtering The check box, as Screen 1 shows. When you enable PPTP filtering, The Servant will refuse all non-PPTP requests.
Bookmarks