As per the Title is suggested here I would guide or give a way for making the BIOS update or flash with Qflash. Basically this can be done using BIOS. Bios is basically a set of instruction that is been stored in a chip on the motherboard. Basically it dictates how the motherboard should perform well or operate and get work with the device. You can get the instruction to be performed well w9ithout any fault. Check out for the critical nature of the same. Also Q flash is basically a bios flash application or a small utility that is been embedded in the Flash Rom/ Q-Flash allows the users to use the thing that is flash the bios without any use of Dos or Windows
Other than the desired steps to be taken you can check for the above pic what basically has to be performed. Then using Q-Flash indicating that nothing disastrous steps to be taken while making it work and operating system since it is in the BIOS menu. You can make the things to get work well that is by getting access to the Qflash. For this you need to follow certain steps. The steps are given as follows:
- Firstly you have to make the system to be restarted
- Now when it is been done you have to make sure that you press End Key to start the Q-Flash
- Choose "Update BIOS from Drive" and this can be done using the arrow keys on Keyboard
- Other than this you have to now select the drive or path where updated BIOS file is present and press "Enter"; you can use a floppy disk, a USB drive or your hard drive to store the file. If you haven't downloaded an updated BIOS yet then get it from the developers site. Click "BIOS" and select the latest version to download from their site.
- You then need to choose the file and hit enter
- now when the system prompts the message as "Are you sure to update BIOS?" to start the update process hit enter
- You can then press any key to return to the main menu once the process is complete
- Finally Press the "Esc" key and then "Enter" to exit the "Q-Flash" utility and reboot the system.
Bookmarks