Many of today's television has the PIP technology, but it is not always easy to understand the work of the owners for getting it to work.
PIP works as a result of the two tuners. If you want that your PIP to work properly then you have to supply two cable signal to it. This is very simple to do and takes only five minutes to do. You just have to follow these simple step for it to work properly.
Step 1
Your first step is to find the source of cable material. You can start from the back of your cable box and search for the cable, that is connected to "in" terminal.
Just follow the line until you see where it is from. In some cases, there may be a splitter on the line.
Step 2
If no splitter is found, disconnect the cable supplying the feed to the cable box. Connect this cable to the "input" terminal on the splitter. It is usually the side of the splitter which has only one terminal.
If there is no splitter than disconnect the cable that is connected to the cable box which is giving supply. After that, connect that cable to the “input” terminal on splitter that has only one terminal.
Step 3
After that take the length of the cable and connect one end to the output terminal on the splitter and the other end to input of the cable box
Step 4
Look on the backside of your television and check whether it has two coaxial cable inputs. If it only has one, then you have to connect your cable box to the TV with audio/video combined cables (the red, white and yellow cables).
But, if your TV have two coaxial cable inputs, then you have to simply take another length of cable from the second "output" terminal on the splitter to the second coaxial input on the television, that’s all.
Bookmarks