To configure your DreamBox for network access :
The first thing to do after each update of the image is (re) configure the network. For do this, enter the menu "Configuration" - "Network" of DreamBox Menu-> Setup-> Expert Setup-> Communication setup-> Here is the information to include:
To change these settings you must uncheck the DHCP top right
a) IP 192.168.xxx. xxx
b) Netmask: 255.255.255. 0
c) Nameserver: xxx.xxx.xxx.xxx
d) Gateway: xxx.xxx.xxx.xxx
e) [x] Configure Network
a) IP is the address you give your DreamBox. My advice is to choose a address starting with 192.168.xxx.xxx, because this type of address is "private" and does found neither on the net or on a server e-mail etc ... If you have no idea Take for example 192.168.0.5.
b) Netmask: without going into details 255.255.255.0 is the correct default value.
c) Nameserver: If you have an internet provider, enter the IP address of the DNS server if you do know not enter the ip of your modem-router if you have one, or your PC if you not have one. Otherwise, should be 127.0.0.1.
d) Gateway: if you use a broadband router or a PC connected to internet and you want your DreamBox accesses the net enter the address of the router or 127.0.0.1 should agree.
e) do not forget to check the "Configure Network", otherwise nothing works.
SAVING THE CONFIGURATION. Now your DreamBox should be detected.
Bookmarks