US robotics 5461 wireless connection problem

[Castle]

I have US robotics 5461 Wireless router and USR as 9107 ADSL router. the USR 9107 is working fine , but when i try to connect the Ethernet output to WAN port of us 5630b . i dont know what the issue but i can not connect internet VIA cable connecting to laptotp or wireless mode.

Can some one help me in this on how should I configure those two routers to make them work together? Thank you for your help .

[Trio]

I cannot print to a network printer attached to my USR5461 Wireless MAXg Router in Windows XP/2000.


Note

• Ensure that your printer is installed correctly and powered on.
• Check that your printer has sufficient ink and paper. A printer connected to the print server cannot send its status to your compute
• Reboot the router by unplugging the power cord. Wait at least 30 seconds before plugging it in again. This will clear the print queue of any pending documents.

Possible Solution:

1. Windows XP Users: Click Windows Start and then Printers and Faxes.

Windows 2000 Users: Click Windows Start, Settings, and then Printers.

2. Right-click on My_Printer on http://192.168.2.1:1631 and click Properties.

3. Click the Advanced tab, make sure that Enable advanced printing features is disabled, and then click Print Processor.

4. For Default data type, select RAW, and click OK.

5. Click Apply, then click OK.

[deveritt]

Setting up USR5461 for wireless printer on Vista 64 bit.

1) Follow the Vista prompts for adding a network printer.

2) The printer will not be listed. Type in http://192.168.2.1:1631/printers/My_Printer

3) Select the make and modle of printer that you are installing.

4) Right click mouse and select properties.

5) Select Port Tab.

6) Port must be changed from 9100 or what ever it is to 1631

7) Exit program, printer works.

8) If for some reason you cant perform step 4 then continue on and finish the installation. Then go to the printer folder and select yoiur printer. Right click the printer, then proceed starting with step 4 through step 7.

The key is to set the Port to 1631.