Printable View
First of all make sure about which format the phone is compatible with. If it is compatible with .Nes games than just follow the steps mentioned in this thread: http://forums.techarena.in/tips-tweaks/1337950.htm . Make sure to remove your sim card during this process as it will try to connect to internet. If you face any problem than do reply here. :thumbup1:Quote:
Originally Posted by bbaannddaa
Which game format does this model supports ? As per my knowledge, it is compatible with .NES games but am not sure. Anyways, just go through the following threads, am sure you will get the required information:Quote:
Originally Posted by akf
http://forums.techarena.in/portable-devices/987950.htm
http://forums.techarena.in/tips-tweaks/1337950.htm
http://forums.techarena.in/portable-devices/1174636.htm
http://forums.techarena.in/portable-devices/1302360.htm
YOu will have to install some drivers for your mobile on your PC. Which operating system are you using ? Anyways, its little long process. The best way i can suggest you is just go through the following guide that contains step nby step process for the same:Quote:
Originally Posted by syamsai
http://forums.techarena.in/guides-tutorials/1135390.htm
http://forums.techarena.in/guides-tu.../1342781-3.htm
Hi! after using the code *#3646633# in my mt6225 it gets switched off!!!!!!
I am unable to get it restarted. I tried for several times. Please can any body solve this problem! how can i use again my mobile. ( sigmatel s4)
Why are you using this code? This code is to enter Set Engineer Mode in Chinese Nokea Phone. And as you mentioned you are having the sigmatel s4. Also you should be knowing that the all codes differ from mobile to mobile and engineering mode are told to be very dangerous, so do it on your own risk. Have you tried Engineer mode : *#110*01#.?!Quote:
Hi! after using the code *#3646633# in my mt6225 it gets switched off!!!!!!
Hi! dis is rameez with ur engineering codes my fxd t33i is switched off and it is not restarting plz plz plz help me.
some china secrate codes for all of you is below:-
Important Secret Codes Of China Phones
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->
UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#0084#call
*#3646633# Sigmatel Engeeniring mode.
Hallo,
I have a iphone 4g from china.
But there is the camera and the internet not really working, so i would like to fix it.
Also i would like to change the language to German.
I would be pleased if someone could help me or at least say me if this is possible.
Thanks.
Hi, all! I have a LT U80 China iphone and I can receive a call, but can't dial to someone!!! it says UNABLE TO CONNECT. PLEASE TELL ME ENGINEERING CODE FOR THIS PHONE.
I tryed many codes but don't found the right 1.
example:
*#110*01#
*#3646633#
PLease help me!!!:crybaby:
Why to seek for the codes... Just reset your phone and it will be fixed. First take the backup of your mobile and than do the hard reset of your china mobile. To know how to do that, just go through this http://forums.techarena.in/portable-devices/1296418.htmQuote:
Originally Posted by base21
Most of the china phones also support the same secret code for restoring them to factory setting. Did you tried the above given codes to perform the factory setting on GFive. If not then try all sets of code and see whether it is working for you or not. If it is not working then go with the below given link which is having the more codes for china phone.
http://forums.techarena.in/tips-tweaks/1167057.htm
Dear Friends...I will very appreciate if sombody can help me to reset or restore my china movil phone E5 The POINT IS everybody say how to do it with the set power On,but No in power OFF...That`s my case ......I was setting the internet services and in one of the steps said delete one of them ....I did and saddenly
turned off...and now it turn on for 5 seconds and off again,,,So I can not reset it ..I need somebody tell me samehow How to reset or what to do In off mode.Please.
Thanks for your patience and por your time.
Paly
hi bro i want to install games in my china mobile n97 mini i have tried all jar and nes file i just copy this file in my memory card in games folder but when i have open file a message is displayed unsupported format so what i have to do i am trying from one month pls help me...even i restart my phone and in my mobile it is clearly mention that it will support java files but hot to that pls...reply me
thank u
Have you tried all the codes that are listed above in this thread? If it is not working then probably your handset doesnt have the capability to support any of the secret codes listed here, as it is seen in most of the unbranded china mobile phone.Quote:
Originally Posted by baronstrauss
I suppose if none of the game is working in your chinese mobile phone then it simply means that your cell phone lacks third party apps and games support. You will have to be satisfied with the inbuilt games that is installed in your mobile phone only.Quote:
Originally Posted by munnarohith
Hi
If anybody help then it shout be great. Just I got one mobile phone from China, under the battery it shows "XLH", Model is : "N3", then IEMI1, IMEI2, IMEI3. Actually this is triple sim, standby all.
But I am from Chennai, when i insert Airtel, aircel sims, both says "SIM registration failed", I don't know the reason? When I ask mfr, they said the all three IMEI Valid, the said Airtel & Aircel sim working in other mobile.
Anybody any idea, please welcome