WDS 2008, DHCP, multiple VLANs, DHCP Relays, help! :-)
Hi,
I'm configuring a Windows Deployment Services 2008 server and it will also
house the DHCP role to be used. The servers who will be using this WDS
service reside on a couple different switches (trunked together), on
multiple VLANs, on multiple subnets.
My desire is that each server while PXE booting will receive a DHCP address
from a DHCP scope dedicated to the subnet it belongs to, which is defined by
what VLAN the switch port is on. They'll use this IP during deployment and
then we'll statically assign an IP when the deployment is complete.
My original thought was to place the NIC in the WDS server on a modified
trunk port allowing all required VLAN IDs for the servers to traverse it and
then find a way for DHCP to respond with a proper scope depending on which
VLAN the request came over. The more I look into it, the more this looks
like a horrible and difficult idea. :-)
Can some of you offer your opinion if a DHCP relay is instead a better
solution? How will the DHCP server know which scope to assign when receiving
the DHCPREQUEST message?
Thank you!
Re: WDS 2008, DHCP, multiple VLANs, DHCP Relays, help! :-)
"Brian Day" <bdaytech@verizon.net> wrote in message
news:F32BF7B3-2439-4C6A-9B11-C54508471056@microsoft.com...
> How will the DHCP server know which scope to assign when receiving the
> DHCPREQUEST message?
The DHCP Relay is a fuction of the LAN Router. That is what Routers do.
The Router knows what it is doing with that. The required information is
included in the relayed packets.
There is nothing on the DHCP Server or the Client that has anything to do
with the "relay" and if it succeedes or fails. DHCP Service just needs to
have a valid Scope for each segment (No Superscopes!)
--
Phillip Windell
www.wandtv.com
The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------
Re: WDS 2008, DHCP, multiple VLANs, DHCP Relays, help! :-)
"Phillip Windell" <philwindell@hotmail.com> wrote in message
news:Om4lYdAlIHA.6032@TK2MSFTNGP03.phx.gbl...
> "Brian Day" <bdaytech@verizon.net> wrote in message
> news:F32BF7B3-2439-4C6A-9B11-C54508471056@microsoft.com...
>
>> How will the DHCP server know which scope to assign when receiving the
>> DHCPREQUEST message?
>
> The DHCP Relay is a fuction of the LAN Router. That is what Routers do.
> The Router knows what it is doing with that. The required information is
> included in the relayed packets.
>
> There is nothing on the DHCP Server or the Client that has anything to do
> with the "relay" and if it succeedes or fails. DHCP Service just needs to
> have a valid Scope for each segment (No Superscopes!)
Thank you, Phillip, I had read that but it seemed too easy to be true. :)
I'll work with my network team to get this configured. Thank you very much.
