Printable View
In my System Information screen, theres a message reading: "Can't Collect
Information". cannot access the windows management Instrumentation Software.
Windows management files may be moved or missing.
Also as a result of this, the Control Panel/System window is missing the
Rating, Processor and memory information. Suggestions?
run services.msc, and see if you can start the WMI service.
This can result from the %SystemRoot%System32WbemRepository folder being
corrupt.
Right click My Computer, and then click Manage.
Under “Services and Applicationsâ€, right click Services, and then find
Windows Management Instrumentation service. Press the STOP link
Now, Delete all of the files that are INSIDE the
%SystemRoot%System32WbemRepository folder. (usually
c:\windows\system32\wbemrespository (do not delete the folder
Restart the computer. The files are recreated when the computer restarts.
Try again
I followed your steps, and deleted those files, rebooted, yet the
problem hasnt been resolved.
RPC is started. Is there a service called "Event Log"? If so, its not there.
The service is listed as "WINDOWS EVENT LOG". Not "EVENT LOG".
Nobody has any explanation as to why this anomoly is happening, and what I
may do to fix it for good?
I'd hate this to be another broken part of Vista I'll have to "Live with".
Reading Mark's post above
In addition to
Windows Management Instrumentation
Are
Event Log
Remote Procedure Call (RPC)
also started?
If not, start them and try again
Don't feel alone ... when I try to look at my system information
(msinfo32.exe), I get the same emtpy window with the message "Can't
Collect Information" "Cannot access the Windows Management
Instrumentation software. Windows Management files may be moved or
missing."
And of course, none of the above suggestions have had any affect ... my
WMI and RPC services are running, and I emptied the "wbemrespository"
directory and rebooted.
I've got 6 weeks into trying to establish a stable copy of Vista, and
I'm on my eighth reload of the OS and my application suites. I wish it
would stop slowly eating itself.
More data, my event log has about 50 or more WMI events ... all right in
a row ... half of which are hard errors (event ID 24 in red) and half of
which are warnings (event ID 63 in yellow).
The first entry (informational), Event ID 5617 says:
- "Windows Management Instrumentation Service subsystems initialized
successfully"
And then is followed by around 50 WMI errors and warnings as noted
below.
The 25 or so Event ID 24's are all similar, e.g.:
- "Event provider $Core attempted to register query "select * from
__InstanceOperationEvent" whose target class "__InstanceOperationEvent"
in //./root namespace does not exist. The query will be ignored."
- "Event provider $Core attempted to register query "select * from
__SystemEvent" whose target class "__SystemEvent" in //./root/SECURITY
namespace does not exist. The query will be ignored."
- "Event provider $Core attempted to register query "select * from
__TimerEvent" whose target class "__TimerEvent" in //./root/SECURITY
namespace does not exist. The query will be ignored."
Those errors are followed by about 25 Event ID 63's, which are all
similar, e.g.:
- "A provider, ActiveScriptEventConsumer, has been registered in the
Windows Management Instrumentation namespace root\default to use the
LocalSystem account. This account is privileged and the provider may
cause a security violation if it does not correctly impersonate user
requests."
- "A provider, CommandLineEventConsumer, has been registered in the
Windows Management Instrumentation namespace root\default to use the
LocalSystem account. This account is privileged and the provider may
cause a security violation if it does not correctly impersonate user
requests."
SOooooo ... does anyone know who this mysterious event provider "$Core"
is .... ?
GerryF.....are you still with us....???
Here is one thing you can try to get your WMI back up and running:
Open a command prompt...(START - RUN - type CMD in the "Open:" box)
At the prompt...copy/paste (or type) each of these commands in THIS
order:
winmgmt /clearadap
winmgmt /kill
winmgmt /unregserver
winmgmt /regserver
winmgmt /resyncperf
Hit ENTER when necessary...(the copy/paste method should enter the
commands automatically).
Here is what each switch does:
The "clearadap" switch clears prior WMI /resyncperf information
from the registry.
The "kill" switch causes WINMGMT to stop running copies.
The "unregserver" switch removes the registry entries.
The "regserver" switch invokes self registration.
The "resyncperf" switch registers the system's performance
libraries with WMI.
I can also help you return EventLog to your services list.
First...ensure that the EventLog service is running by attempting to
start EventLog, like so:
Open another command prompt and type NET START EVENTLOG at the
prompt.
If EventLog is already started...you will receive a message
stating such.
After making sure that the service is running, proceed to the next
step:
Check for the following key in your registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
\Eventlog
If the key IS found...it may be corrupt...in which case, it must
be replaced using the method found below.
If the key is not found...you need to get a copy of the key from
another computer, and IMPORT if into your registry.
If you don't have another computer from which to copy the key...I
can email you a copy.
The file, in text form, is simply too lengthy to post here.
Please respond if you would like this file emailed to you.
GOOD LUCK.....!!!! Let us know how things work out...!!!
i know this post is a month old but i was wondering if you could email me
a copy of the key. I'm having the same problem and have been going crazy
trying to find a fix. This is the first post that i've seen that trys
something different.
Sorry Its the thread aboutCannot access Windows Management
Instrumentation software some files maybe be moved or missing
I've trawled all the tech sites and tried all sorts of fixes but to no
avail
I've looked in my registry and found the first entry under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
\Eventlog
and found the first entry "default" as having no value
Could this be my problem ?
All i know is I cant access System Information as just having learnt
about this by doing a City & Guilds pc maintenance course 7266-11
This is damm annoying and would like to fix it
I did do a system restore saw System Information come up then it
disappeared again
Hey all, here's the solution to your "Unavailable Rating" and SysInfo
problems
Start --> Run
CMD
net localgroup administrators NetworkService /ADD
Enter
Yes and just tried running msinfo32 from start/run and still it happens
can't even put up a screenshot its too big !
http://support.microsoft.com/kb/323209
Don't know what to say. If you've tried all the fixes listed in the
thread, then maybe someone else can help.
That was covered in the thread in earlier posts.
You were the ONLY person who fixed this
problem for me. Thanks so much for knowing what to do. Now what I want
to know, if you can tell me, What was causing this error, and why did
that simple dos prompt fix it? It's not enough for me just to have my
problem fixed! I need to know -why-...
I'm having the same problem done all the fixes found the key but default
says that it has no value Is that the problem ? If so could some one
email the new key or tell me how to fix it
I have NO idea what you're talking about. I just looked this thread
up on Google Groups... and there's something there about running
msinfo32.exe and then getting the error. Is that what you're talking
about?
On my machine it has the exact same value. When I run msinfo32 from
Start/"Run", it works.
Right Click "Computer", then "Manage", then
"Services and Applications" then "Services" to find it. I was able to
rebuild it I think, but it worked!