Printable View
I am running a basic Login script in Sysvol to map a few mapped drives thru
the Net use: \\server\folder /persistent:yes command.
After the first logon, the next consecutive logons give me System error 85
has occurred. The local device is already in use. The mapped drive is
there, but there is an error in the script.
Is there a better way to re-map drives on each Logon?
In news:48A3093A-E8DE-4200-918C-EC9E5E0BEDEF@microsoft.com,
Marc S <MarcS@discussions.microsoft.com> typed:
> I am running a basic Login script in Sysvol to map a few mapped
> drives thru the Net use: \\server\folder /persistent:yes command.
>
> After the first logon, the next consecutive logons give me System
> error 85 has occurred. The local device is already in use. The
> mapped drive is there, but there is an error in the script.
>
> Is there a better way to re-map drives on each Logon?
What I did in situations with such a script, and is good practice, is to
delete all drives before mapping them to eliminate this error. This also
deletes mappings the users may have deleted the necessary share and mapped
anothe ron the same letter. This ensures all users get the proper mappings
whenever they logon.
net use d: /delete
net use e: /delete
etc.
net use d: \\server\share1
net use e: \\server\share2
--
Regards,
Ace
This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.
Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT,
MVP Microsoft MVP - Directory Services
Microsoft Certified Trainer
Infinite Diversities in Infinite Combinations
"Ace Fekay [MVP]" <PleaseAskMe@SomeDomain.com> wrote in message
news:OPzLJT7ZIHA.208@TK2MSFTNGP02.phx.gbl...
> In news:48A3093A-E8DE-4200-918C-EC9E5E0BEDEF@microsoft.com,
> Marc S <MarcS@discussions.microsoft.com> typed:
>> I am running a basic Login script in Sysvol to map a few mapped
>> drives thru the Net use: \\server\folder /persistent:yes command.
>>
>> After the first logon, the next consecutive logons give me System
>> error 85 has occurred. The local device is already in use. The
>> mapped drive is there, but there is an error in the script.
>>
>> Is there a better way to re-map drives on each Logon?
>
> What I did in situations with such a script, and is good practice, is to
> delete all drives before mapping them to eliminate this error. This also
> deletes mappings the users may have deleted the necessary share and mapped
> anothe ron the same letter. This ensures all users get the proper
> mappings whenever they logon.
>
> net use d: /delete
> net use e: /delete
> etc.
> net use d: \\server\share1
> net use e: \\server\share2
>
>
> --
> Regards,
> Ace
>
> This posting is provided "AS-IS" with no warranties or guarantees and
> confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT,
> MVP Microsoft MVP - Directory Services
> Microsoft Certified Trainer
>
> Infinite Diversities in Infinite Combinations
>
I don't use the persistent option when I map drives in a logon script. That
may be causing the error.
--
Richard Mueller
Microsoft MVP Scripting and ADSI
Hilltop Lab - http://www.rlmueller.net
--
In news:%23ectkW7ZIHA.1960@TK2MSFTNGP02.phx.gbl,
Richard Mueller [MVP] <rlmueller-nospam@ameritech.nospam.net> typed:
>
> I don't use the persistent option when I map drives in a logon
> script. That may be causing the error.
>
> --
> Richard Mueller
> Microsoft MVP Scripting and ADSI
> Hilltop Lab - http://www.rlmueller.net
Good point, Richard. I don't either. No need especially if deleting them
anyway before re-mapping them
Ace
So, is it good practice to use both suggestions:
1. First delete the "specific mapped drives first"
net use e: /delete
2. Can you use the Persistent command "without" adding Yes or NO.
Net use: \\server\folder /persistent
OR
Just don't even include the Persistent command
Net use: \\server\folder
"Ace Fekay [MVP]" wrote:
> In news:%23ectkW7ZIHA.1960@TK2MSFTNGP02.phx.gbl,
> Richard Mueller [MVP] <rlmueller-nospam@ameritech.nospam.net> typed:
> >
> > I don't use the persistent option when I map drives in a logon
> > script. That may be causing the error.
> >
> > --
> > Richard Mueller
> > Microsoft MVP Scripting and ADSI
> > Hilltop Lab - http://www.rlmueller.net
>
> Good point, Richard. I don't either. No need especially if deleting them
> anyway before re-mapping them
>
> Ace
>
>
>
>
The default is for the mapping to not be persistent, so don't include it in
the command. I would suggest either first remove all drive mappings, or (in
VBScript) trap the possible error when you map drives. If the mapping fails,
remove the drive and try again. That cannot be done in a batch file, so to
be save use the /delete.
--
Richard Mueller
Microsoft MVP Scripting and ADSI
Hilltop Lab - http://www.rlmueller.net
--
"Marc S" <MarcS@discussions.microsoft.com> wrote in message
news:974B1761-04E1-4647-9F4C-2D76C57D5886@microsoft.com...
> So, is it good practice to use both suggestions:
> 1. First delete the "specific mapped drives first"
> net use e: /delete
>
> 2. Can you use the Persistent command "without" adding Yes or NO.
> Net use: \\server\folder /persistent
> OR
> Just don't even include the Persistent command
> Net use: \\server\folder
>
> "Ace Fekay [MVP]" wrote:
>
>> In news:%23ectkW7ZIHA.1960@TK2MSFTNGP02.phx.gbl,
>> Richard Mueller [MVP] <rlmueller-nospam@ameritech.nospam.net> typed:
>> >
>> > I don't use the persistent option when I map drives in a logon
>> > script. That may be causing the error.
>> >
>> > --
>> > Richard Mueller
>> > Microsoft MVP Scripting and ADSI
>> > Hilltop Lab - http://www.rlmueller.net
>>
>> Good point, Richard. I don't either. No need especially if deleting them
>> anyway before re-mapping them
>>
>> Ace
>>
>
>>
>>
>>
"Richard Mueller [MVP]" wrote:
> The default is for the mapping to not be persistent, so don't include it in
> the command. I would suggest either first remove all drive mappings, or (in
> VBScript) trap the possible error when you map drives. If the mapping fails,
> remove the drive and try again. That cannot be done in a batch file, so to
> be save use the /delete.
>
> --
> Richard Mueller
> Microsoft MVP Scripting and ADSI
> Hilltop Lab - http://www.rlmueller.net
> --
>
> "Marc S" <MarcS@discussions.microsoft.com> wrote in message
> news:974B1761-04E1-4647-9F4C-2D76C57D5886@microsoft.com...
> > So, is it good practice to use both suggestions:
> > 1. First delete the "specific mapped drives first"
> > net use e: /delete
> >
> > 2. Can you use the Persistent command "without" adding Yes or NO.
> > Net use: \\server\folder /persistent
> > OR
> > Just don't even include the Persistent command
> > Net use: \\server\folder
> >
> > "Ace Fekay [MVP]" wrote:
> >
> >> In news:%23ectkW7ZIHA.1960@TK2MSFTNGP02.phx.gbl,
> >> Richard Mueller [MVP] <rlmueller-nospam@ameritech.nospam.net> typed:
> >> >
> >> > I don't use the persistent option when I map drives in a logon
> >> > script. That may be causing the error.
> >> >
> >> > --
> >> > Richard Mueller
> >> > Microsoft MVP Scripting and ADSI
> >> > Hilltop Lab - http://www.rlmueller.net
> >>
> >> Good point, Richard. I don't either. No need especially if deleting them
> >> anyway before re-mapping them
> >>
> >> Ace
> >>
> >>
After some further testing of the Logon Script using deleting mapped drives,
and removing the persistent, I had intermittant issues. The script would
stop and prompt to click Yes to delete one of the mapped drives. Not sure why
this occurred, but I don't want my users to go thru this.
If I don't add the delete mapped drives, and leave the persistant mapped
drives in the Logon Script...then the user gets the Login Script - System
error 85 ONLY when the drives are already mapped.
Is it any harm to just leave that alone? The error doesn't seem to hurt
anything. If the drives get deleted manually, at least the logon script will
re-add them.
In news:592C6466-D43D-4A06-AEB9-DB16E38C9AA8@microsoft.com,
Marc S <MarcS@discussions.microsoft.com> typed:
> After some further testing of the Logon Script using deleting mapped
> drives, and removing the persistent, I had intermittant issues. The
> script would stop and prompt to click Yes to delete one of the mapped
> drives. Not sure why this occurred, but I don't want my users to go
> thru this.
>
> If I don't add the delete mapped drives, and leave the persistant
> mapped drives in the Logon Script...then the user gets the Login
> Script - System error 85 ONLY when the drives are already mapped.
>
> Is it any harm to just leave that alone? The error doesn't seem to
> hurt anything. If the drives get deleted manually, at least the logon
> script will re-add them.
If the users are getting prompted with a question, it may mean the drive
still exists and they are being prompted to map it anyway, or there is an
open IPC session with the machine, such as a current open folder. Maybe it
is a drive they have manually mapped.
Are you deleting ALL drives in your script? I had to in one case, set delete
statements for drives from F: to Z: for this one client to make the script
work. They had drives mapped all over the place.
Forget the persisitent switch. That is like checking the box when manually
mapping a drive to map it every time you logon.
Ace