Printable View
Auto Update downloaded a driver update. Failed to install. Error message
80070103 that driver not compatiable with system. On reboot, system does not
start and have to use the restore point. How can I eliminate this update from
system and prevent from downloading again?
running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
Device manager does show the ATI 4379 Serial ATA Controller installed on
machine. Is a Bus adapter.
Never use winupdate for drivers, unless its MS specific hw
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
not
> start and have to use the restore point. How can I eliminate this update
from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Never use winupdate for drivers, unless its MS specific hw
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
not
> start and have to use the restore point. How can I eliminate this update
from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Never use winupdate for drivers, unless its MS specific hw
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
not
> start and have to use the restore point. How can I eliminate this update
from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Hi there,
If really needed (when your hardware is not working well) take the driver
from ATI.
When updating you should be able to choose a custom update demark the ATI
update and choose do not show this update again.
When using win update by web you shlould be able to hide the update.
Best regards,
Michel Denie
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
> not
> start and have to use the restore point. How can I eliminate this update
> from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Hi there,
If really needed (when your hardware is not working well) take the driver
from ATI.
When updating you should be able to choose a custom update demark the ATI
update and choose do not show this update again.
When using win update by web you shlould be able to hide the update.
Best regards,
Michel Denie
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
> not
> start and have to use the restore point. How can I eliminate this update
> from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Hi there,
If really needed (when your hardware is not working well) take the driver
from ATI.
When updating you should be able to choose a custom update demark the ATI
update and choose do not show this update again.
When using win update by web you shlould be able to hide the update.
Best regards,
Michel Denie
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does
> not
> start and have to use the restore point. How can I eliminate this update
> from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Here is latest I have found out. Not good news.
I contacted Microsoft and they do not know the answer. Their workaround is
the same as others have mention in this thread. In Windows Auto Update, check
the box to "Ask before installing" and then when this download is ready,
click on install later and just never install it. Note you will get this
message everytime you reboot your system but at least Vista will boot up this
way without resorting to using the last good restore.
good luck.
"realcestmoi" wrote:
> Hi there,
>
> If really needed (when your hardware is not working well) take the driver
> from ATI.
>
> When updating you should be able to choose a custom update demark the ATI
> update and choose do not show this update again.
>
> When using win update by web you shlould be able to hide the update.
>
> Best regards,
> Michel Denie
>
> "Fred" <Fred@discussions.microsoft.com> wrote in message
> news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > Auto Update downloaded a driver update. Failed to install. Error message
> > 80070103 that driver not compatiable with system. On reboot, system does
> > not
> > start and have to use the restore point. How can I eliminate this update
> > from
> > system and prevent from downloading again?
> >
> > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
> >
> > Device manager does show the ATI 4379 Serial ATA Controller installed on
> > machine. Is a Bus adapter.
>
>
>
Here is latest I have found out. Not good news.
I contacted Microsoft and they do not know the answer. Their workaround is
the same as others have mention in this thread. In Windows Auto Update, check
the box to "Ask before installing" and then when this download is ready,
click on install later and just never install it. Note you will get this
message everytime you reboot your system but at least Vista will boot up this
way without resorting to using the last good restore.
good luck.
"realcestmoi" wrote:
> Hi there,
>
> If really needed (when your hardware is not working well) take the driver
> from ATI.
>
> When updating you should be able to choose a custom update demark the ATI
> update and choose do not show this update again.
>
> When using win update by web you shlould be able to hide the update.
>
> Best regards,
> Michel Denie
>
> "Fred" <Fred@discussions.microsoft.com> wrote in message
> news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > Auto Update downloaded a driver update. Failed to install. Error message
> > 80070103 that driver not compatiable with system. On reboot, system does
> > not
> > start and have to use the restore point. How can I eliminate this update
> > from
> > system and prevent from downloading again?
> >
> > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
> >
> > Device manager does show the ATI 4379 Serial ATA Controller installed on
> > machine. Is a Bus adapter.
>
>
>
Here is latest I have found out. Not good news.
I contacted Microsoft and they do not know the answer. Their workaround is
the same as others have mention in this thread. In Windows Auto Update, check
the box to "Ask before installing" and then when this download is ready,
click on install later and just never install it. Note you will get this
message everytime you reboot your system but at least Vista will boot up this
way without resorting to using the last good restore.
good luck.
"realcestmoi" wrote:
> Hi there,
>
> If really needed (when your hardware is not working well) take the driver
> from ATI.
>
> When updating you should be able to choose a custom update demark the ATI
> update and choose do not show this update again.
>
> When using win update by web you shlould be able to hide the update.
>
> Best regards,
> Michel Denie
>
> "Fred" <Fred@discussions.microsoft.com> wrote in message
> news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > Auto Update downloaded a driver update. Failed to install. Error message
> > 80070103 that driver not compatiable with system. On reboot, system does
> > not
> > start and have to use the restore point. How can I eliminate this update
> > from
> > system and prevent from downloading again?
> >
> > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
> >
> > Device manager does show the ATI 4379 Serial ATA Controller installed on
> > machine. Is a Bus adapter.
>
>
>
Ignore all winupdate drivers, unless for MS specific HW
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:7A5E0C75-F1C7-46CA-8B39-F23A4CDDC350@microsoft.com...
> Here is latest I have found out. Not good news.
>
>
> I contacted Microsoft and they do not know the answer. Their workaround is
> the same as others have mention in this thread. In Windows Auto Update,
check
> the box to "Ask before installing" and then when this download is ready,
> click on install later and just never install it. Note you will get this
> message everytime you reboot your system but at least Vista will boot up
this
> way without resorting to using the last good restore.
>
>
>
> good luck.
>
>
>
>
>
> "realcestmoi" wrote:
>
> > Hi there,
> >
> > If really needed (when your hardware is not working well) take the
driver
> > from ATI.
> >
> > When updating you should be able to choose a custom update demark the
ATI
> > update and choose do not show this update again.
> >
> > When using win update by web you shlould be able to hide the update.
> >
> > Best regards,
> > Michel Denie
> >
> > "Fred" <Fred@discussions.microsoft.com> wrote in message
> > news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > > Auto Update downloaded a driver update. Failed to install. Error
message
> > > 80070103 that driver not compatiable with system. On reboot, system
does
> > > not
> > > start and have to use the restore point. How can I eliminate this
update
> > > from
> > > system and prevent from downloading again?
> > >
> > > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb
mem.
> > >
> > > Device manager does show the ATI 4379 Serial ATA Controller installed
on
> > > machine. Is a Bus adapter.
> >
> >
> >
Ignore all winupdate drivers, unless for MS specific HW
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:7A5E0C75-F1C7-46CA-8B39-F23A4CDDC350@microsoft.com...
> Here is latest I have found out. Not good news.
>
>
> I contacted Microsoft and they do not know the answer. Their workaround is
> the same as others have mention in this thread. In Windows Auto Update,
check
> the box to "Ask before installing" and then when this download is ready,
> click on install later and just never install it. Note you will get this
> message everytime you reboot your system but at least Vista will boot up
this
> way without resorting to using the last good restore.
>
>
>
> good luck.
>
>
>
>
>
> "realcestmoi" wrote:
>
> > Hi there,
> >
> > If really needed (when your hardware is not working well) take the
driver
> > from ATI.
> >
> > When updating you should be able to choose a custom update demark the
ATI
> > update and choose do not show this update again.
> >
> > When using win update by web you shlould be able to hide the update.
> >
> > Best regards,
> > Michel Denie
> >
> > "Fred" <Fred@discussions.microsoft.com> wrote in message
> > news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > > Auto Update downloaded a driver update. Failed to install. Error
message
> > > 80070103 that driver not compatiable with system. On reboot, system
does
> > > not
> > > start and have to use the restore point. How can I eliminate this
update
> > > from
> > > system and prevent from downloading again?
> > >
> > > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb
mem.
> > >
> > > Device manager does show the ATI 4379 Serial ATA Controller installed
on
> > > machine. Is a Bus adapter.
> >
> >
> >
Ignore all winupdate drivers, unless for MS specific HW
"Fred" <Fred@discussions.microsoft.com> wrote in message
news:7A5E0C75-F1C7-46CA-8B39-F23A4CDDC350@microsoft.com...
> Here is latest I have found out. Not good news.
>
>
> I contacted Microsoft and they do not know the answer. Their workaround is
> the same as others have mention in this thread. In Windows Auto Update,
check
> the box to "Ask before installing" and then when this download is ready,
> click on install later and just never install it. Note you will get this
> message everytime you reboot your system but at least Vista will boot up
this
> way without resorting to using the last good restore.
>
>
>
> good luck.
>
>
>
>
>
> "realcestmoi" wrote:
>
> > Hi there,
> >
> > If really needed (when your hardware is not working well) take the
driver
> > from ATI.
> >
> > When updating you should be able to choose a custom update demark the
ATI
> > update and choose do not show this update again.
> >
> > When using win update by web you shlould be able to hide the update.
> >
> > Best regards,
> > Michel Denie
> >
> > "Fred" <Fred@discussions.microsoft.com> wrote in message
> > news:FCBBB615-2EF4-4DC6-8F57-5B025BA8310A@microsoft.com...
> > > Auto Update downloaded a driver update. Failed to install. Error
message
> > > 80070103 that driver not compatiable with system. On reboot, system
does
> > > not
> > > start and have to use the restore point. How can I eliminate this
update
> > > from
> > > system and prevent from downloading again?
> > >
> > > running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb
mem.
> > >
> > > Device manager does show the ATI 4379 Serial ATA Controller installed
on
> > > machine. Is a Bus adapter.
> >
> >
> >
same problem but computer tries to install it every time i start up, does n e
one no how to eliminate this update from the computer
"Fred" wrote:
> Auto Update downloaded a driver update. Failed to install. Error message
> 80070103 that driver not compatiable with system. On reboot, system does not
> start and have to use the restore point. How can I eliminate this update from
> system and prevent from downloading again?
>
> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>
> Device manager does show the ATI 4379 Serial ATA Controller installed on
> machine. Is a Bus adapter.
Hi There,
Go to windows update site and disable the specific OPTIONAL driver update
(hide it)
Taking driver updates from windows update is really not a good idea
unlessyou like problems!!!
If your device is working fine it is recommanded not to update the driver,if
really needed, if the device is not functioning well that is, you should
take a driver from the manufacturers website.
Try rolling back on the driver, boot last known good configuration or use
system restore to to a date before the problem occured to try and work
around the occured problem. You can also try if you know which update caused
the problem to uninstall it.
Take the original driver from your mainboard driver cd if needed.
Best regards,
Michel Denie
"mytime_anytime" <mytimeanytime@discussions.microsoft.com> wrote in message
news:AE385855-37A2-4C89-9F7E-1AFEC9212447@microsoft.com...
> same problem but computer tries to install it every time i start up, does
> n e
> one no how to eliminate this update from the computer
>
> "Fred" wrote:
>
>> Auto Update downloaded a driver update. Failed to install. Error message
>> 80070103 that driver not compatiable with system. On reboot, system does
>> not
>> start and have to use the restore point. How can I eliminate this update
>> from
>> system and prevent from downloading again?
>>
>> running Vista Home Premium on Acer 5100 AMD turion 2x 64 with 1 gb mem.
>>
>> Device manager does show the ATI 4379 Serial ATA Controller installed on
>> machine. Is a Bus adapter.