-
WGA Patch KB905474
Hello,
After installing the new Windows Genuine Advantage Notification Patch
KB905474 v1.7.17.0, I noticed a file in my Temp folder titled:
WGAErrLog.txt
It keeps reappearing whenever I log into my account or reboot after deleting.
I receive no errors or notifications regarding Windows Validation at the
Event Viewer.
I ran the Microsoft online validation tool, it validates without any problems.
That WGAErrLog contains the following :
D446F964-508-80004005_D446F964-441-80004005_D446F964-508-80004005_D446F964-441-80004005_6AA6ADEF-541-80004005_D446F964-508-80004005_D446F964-475-80004005_6AA6ADEF-560-80004005_D446F964-508-80004005_D446F964-441-80004005_6AA6ADEF-573-80004005_D446F964-508-
This is a copy of the latest entries for WgaNotify.log located at
%SystemDrive%\WINDOWS folder :
0.328: c:\de817a7c45c3958d412d44a7b0250f\update\update.exe (version 6.3.3.0)
0.422: Failed To Enable SE_SHUTDOWN_PRIVILEGE
0.422: Hotfix started with following command line: -z
0.422: In Function GetBuildType, line 1170, RegQueryValueEx failed with
error 0x2
0.453: CreateUserInterface: DefineInstallCustomUI returned 0x0
2.813: In Function TestVolatileFlag, line 12013, RegOpenKeyEx failed with
error 0x2
2.813: In Function TestVolatileFlag, line 12045, RegOpenKeyEx failed with
error 0x2
2.813: DoInstallation: CleanPFR failed: 0x2
2.813: In Function GetBuildType, line 1170, RegQueryValueEx failed with
error 0x2
2.813: SetProductTypes: InfProductBuildType=BuildType.Sel
2.813: SetAltOsLoaderPath: No section uses DirId 65701; done.
2.875: DoInstallation: FetchSourceURL for
c:\de817a7c45c3958d412d44a7b0250f\update\update.inf failed
2.875: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed:
0xe0000102
2.875: BuildCabinetManifest: update.url absent
2.891: Starting AnalyzeComponents
2.891: AnalyzePhaseZero used 0 ticks
2.891: No c:\windows\INF\updtblk.inf file.
2.891: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
2.891: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
10.485: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00
10.735: Third Party Provider = Intel for
PCI\VEN_8086&DEV_2771&SUBSYS_00000000&REV_02\3&13C0B0C5&0&08
11.063: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&13C0B0C5&0&F8
11.453: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
11.813: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27C8&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E8
12.016: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27C9&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E9
12.219: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27CA&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EA
12.438: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27CB&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EB
12.735: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27CC&SUBSYS_50061458&REV_01\3&13C0B0C5&0&EF
12.985: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E0
13.219: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27D4&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E2
13.547: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27DA&SUBSYS_50011458&REV_01\3&13C0B0C5&0&FB
13.813: Third Party Provider = Intel for
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01\3&13C0B0C5&0&F9
14.688: Wiz2Proc:CreateFile failed for eula.txt:INVALID_HANDLE_VALUE
14.688: CreateUninstall = 0,Directory = C:\WINDOWS\$NtUninstallWgaNotify$
15.703: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\oem20.inf of device ROOT\MODEM\0000
15.922: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\oem21.inf of device ROOT\MODEM\0001
16.125: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\oem22.inf of device ROOT\MODEM\0002
16.313: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\oem22.inf of device ROOT\MODEM\0003
16.985: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\oem15.inf of device ROOT\NET\0000
21.157: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\btcusb.inf of device USB\VID_0DB0&PID_1967\5&339E9CE1&0&1
21.188: SetupVerifyInfFile failed with error 0x490 for
c:\windows\inf\btcusb.inf of device USB\VID_0DB0&PID_1967\5&339E9CE1&0&2
21.782: OEM file scan used 18891 ticks
21.782: AnalyzePhaseOne: used 18891 ticks
21.782: AnalyzeComponents: Hotpatch analysis disabled; skipping.
21.782: AnalyzeComponents: Hotpatching is disabled.
21.782: AnalyzePhaseTwo used 0 ticks
21.782: AnalyzePhaseThree used 0 ticks
21.782: AnalyzePhaseFive used 0 ticks
21.782: AnalyzePhaseSix used 0 ticks
21.782: AnalyzeComponents used 18891 ticks
21.782: Downloading 0 files
21.782: bPatchMode = FALSE
21.782: Inventory complete: ReturnStatus=0, 18907 ticks
21.782: Num Ticks for invent : 18907
21.782: Allocation size of drive C: is 4096 bytes, free space = 31138926592
bytes
21.782: Drive C: free 29696MB req: 7MB w/uninstall 0MB
21.782: CabinetBuild complete
21.782: Num Ticks for Cabinet build : 0
21.782: DynamicStrings section not defined or empty.
21.797: FileInUse:: Detection disabled.
22.797: Registering Uninstall Program for -> WgaNotify, WgaNotify , 0x0
22.797: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed:
0xe0000102
22.875: Copied file: C:\WINDOWS\system32\spmsg.dll
22.891: PFE2: Not avoiding Per File Exceptions.
22.922: GetCatVersion: Failed to retrieve version information from
C:\WINDOWS\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\WgaNotify.cat with error 0x80092004
22.922: GetCatVersion: Failed to retrieve version information from
C:\WINDOWS\WgaNotify.cat with error 0x80092004
23.047: Copied file: C:\WINDOWS\system32\LegitCheckControl.dll
23.219: Copied file: C:\WINDOWS\system32\WgaLogon.dll
23.344: Copied file: C:\WINDOWS\system32\WgaTray.exe
23.485: Copied file: C:\WINDOWS\system32\LegitCheckControl.dll
23.594: Copied file: C:\WINDOWS\system32\WgaLogon.dll
23.610: Copied file: C:\WINDOWS\system32\WgaTray.exe
23.641: Copied file: C:\WINDOWS\system32\DllCache\WgaLogon.dll
23.688: Copied file: C:\WINDOWS\system32\DllCache\WgaTray.exe
23.703: DoInstallation: Installing assemblies with source root path:
c:\de817a7c45c3958d412d44a7b0250f\
23.703: Num Ticks for Copying files : 1921
23.750: Num Ticks for Reg update and deleting 0 size files : 47
23.750: Starting process: C:\WINDOWS\system32\spupdsvc.exe /install
"Enables Installer to complete its scheduled post-reboot tasks"
23.922: Return Code = 0
23.922: Starting process: C:\WINDOWS\system32\wgatray.exe /b
30.703: Return Code = 0
30.719: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is
empty; nothing to do.
30.719: Starting process: C:\WINDOWS\system32\spupdsvc.exe /delete
30.782: Return Code = 0
30.797: CleanupTrustedInfFile: GetFileAttributes for
C:\WINDOWS\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\oem23.cat
failed: 0x2
33.297: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0
- Windows Genuine Advantage Notification KB905474 v1.5.530.0 used to work
perfectly without showing any of these error logs, why do these logs keep on
showing up ?
Thank You,
-
RE: WGA Patch KB905474
Hi Ahmed,
I've got the exact same error installing Windows Server 2003 SP2 on a SBS
2003 system. Did you get any answers on this request?
Greets,
Guus
"Ahmed" wrote:
> Hello,
>
> After installing the new Windows Genuine Advantage Notification Patch
> KB905474 v1.7.17.0, I noticed a file in my Temp folder titled:
>
> WGAErrLog.txt
>
> It keeps reappearing whenever I log into my account or reboot after deleting.
>
> I receive no errors or notifications regarding Windows Validation at the
> Event Viewer.
>
> I ran the Microsoft online validation tool, it validates without any problems.
>
>
> That WGAErrLog contains the following :
>
> D446F964-508-80004005_D446F964-441-80004005_D446F964-508-80004005_D446F964-441-80004005_6AA6ADEF-541-80004005_D446F964-508-80004005_D446F964-475-80004005_6AA6ADEF-560-80004005_D446F964-508-80004005_D446F964-441-80004005_6AA6ADEF-573-80004005_D446F964-508-
>
> This is a copy of the latest entries for WgaNotify.log located at
> %SystemDrive%\WINDOWS folder :
>
> 0.328: c:\de817a7c45c3958d412d44a7b0250f\update\update.exe (version 6.3.3.0)
> 0.422: Failed To Enable SE_SHUTDOWN_PRIVILEGE
> 0.422: Hotfix started with following command line: -z
> 0.422: In Function GetBuildType, line 1170, RegQueryValueEx failed with
> error 0x2
> 0.453: CreateUserInterface: DefineInstallCustomUI returned 0x0
> 2.813: In Function TestVolatileFlag, line 12013, RegOpenKeyEx failed with
> error 0x2
> 2.813: In Function TestVolatileFlag, line 12045, RegOpenKeyEx failed with
> error 0x2
> 2.813: DoInstallation: CleanPFR failed: 0x2
> 2.813: In Function GetBuildType, line 1170, RegQueryValueEx failed with
> error 0x2
> 2.813: SetProductTypes: InfProductBuildType=BuildType.Sel
> 2.813: SetAltOsLoaderPath: No section uses DirId 65701; done.
> 2.875: DoInstallation: FetchSourceURL for
> c:\de817a7c45c3958d412d44a7b0250f\update\update.inf failed
> 2.875: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed:
> 0xe0000102
> 2.875: BuildCabinetManifest: update.url absent
> 2.891: Starting AnalyzeComponents
> 2.891: AnalyzePhaseZero used 0 ticks
> 2.891: No c:\windows\INF\updtblk.inf file.
> 2.891: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
> 2.891: SetupFindFirstLine in LoadExclusionList Failed with error: 0xe0000102
> 10.485: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00
> 10.735: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_2771&SUBSYS_00000000&REV_02\3&13C0B0C5&0&08
> 11.063: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&13C0B0C5&0&F8
> 11.453: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
> 11.813: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27C8&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E8
> 12.016: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27C9&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E9
> 12.219: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27CA&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EA
> 12.438: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27CB&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EB
> 12.735: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27CC&SUBSYS_50061458&REV_01\3&13C0B0C5&0&EF
> 12.985: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E0
> 13.219: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27D4&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E2
> 13.547: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27DA&SUBSYS_50011458&REV_01\3&13C0B0C5&0&FB
> 13.813: Third Party Provider = Intel for
> PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01\3&13C0B0C5&0&F9
> 14.688: Wiz2Proc:CreateFile failed for eula.txt:INVALID_HANDLE_VALUE
> 14.688: CreateUninstall = 0,Directory = C:\WINDOWS\$NtUninstallWgaNotify$
> 15.703: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\oem20.inf of device ROOT\MODEM\0000
> 15.922: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\oem21.inf of device ROOT\MODEM\0001
> 16.125: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\oem22.inf of device ROOT\MODEM\0002
> 16.313: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\oem22.inf of device ROOT\MODEM\0003
> 16.985: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\oem15.inf of device ROOT\NET\0000
> 21.157: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\btcusb.inf of device USB\VID_0DB0&PID_1967\5&339E9CE1&0&1
> 21.188: SetupVerifyInfFile failed with error 0x490 for
> c:\windows\inf\btcusb.inf of device USB\VID_0DB0&PID_1967\5&339E9CE1&0&2
> 21.782: OEM file scan used 18891 ticks
> 21.782: AnalyzePhaseOne: used 18891 ticks
> 21.782: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> 21.782: AnalyzeComponents: Hotpatching is disabled.
> 21.782: AnalyzePhaseTwo used 0 ticks
> 21.782: AnalyzePhaseThree used 0 ticks
> 21.782: AnalyzePhaseFive used 0 ticks
> 21.782: AnalyzePhaseSix used 0 ticks
> 21.782: AnalyzeComponents used 18891 ticks
> 21.782: Downloading 0 files
> 21.782: bPatchMode = FALSE
> 21.782: Inventory complete: ReturnStatus=0, 18907 ticks
> 21.782: Num Ticks for invent : 18907
> 21.782: Allocation size of drive C: is 4096 bytes, free space = 31138926592
> bytes
> 21.782: Drive C: free 29696MB req: 7MB w/uninstall 0MB
> 21.782: CabinetBuild complete
> 21.782: Num Ticks for Cabinet build : 0
> 21.782: DynamicStrings section not defined or empty.
> 21.797: FileInUse:: Detection disabled.
> 22.797: Registering Uninstall Program for -> WgaNotify, WgaNotify , 0x0
> 22.797: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed:
> 0xe0000102
> 22.875: Copied file: C:\WINDOWS\system32\spmsg.dll
> 22.891: PFE2: Not avoiding Per File Exceptions.
> 22.922: GetCatVersion: Failed to retrieve version information from
> C:\WINDOWS\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\WgaNotify.cat with error 0x80092004
> 22.922: GetCatVersion: Failed to retrieve version information from
> C:\WINDOWS\WgaNotify.cat with error 0x80092004
> 23.047: Copied file: C:\WINDOWS\system32\LegitCheckControl.dll
> 23.219: Copied file: C:\WINDOWS\system32\WgaLogon.dll
> 23.344: Copied file: C:\WINDOWS\system32\WgaTray.exe
> 23.485: Copied file: C:\WINDOWS\system32\LegitCheckControl.dll
> 23.594: Copied file: C:\WINDOWS\system32\WgaLogon.dll
> 23.610: Copied file: C:\WINDOWS\system32\WgaTray.exe
> 23.641: Copied file: C:\WINDOWS\system32\DllCache\WgaLogon.dll
> 23.688: Copied file: C:\WINDOWS\system32\DllCache\WgaTray.exe
> 23.703: DoInstallation: Installing assemblies with source root path:
> c:\de817a7c45c3958d412d44a7b0250f\
> 23.703: Num Ticks for Copying files : 1921
> 23.750: Num Ticks for Reg update and deleting 0 size files : 47
> 23.750: Starting process: C:\WINDOWS\system32\spupdsvc.exe /install
> "Enables Installer to complete its scheduled post-reboot tasks"
> 23.922: Return Code = 0
> 23.922: Starting process: C:\WINDOWS\system32\wgatray.exe /b
> 30.703: Return Code = 0
> 30.719: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is
> empty; nothing to do.
> 30.719: Starting process: C:\WINDOWS\system32\spupdsvc.exe /delete
> 30.782: Return Code = 0
> 30.797: CleanupTrustedInfFile: GetFileAttributes for
> C:\WINDOWS\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\oem23.cat
> failed: 0x2
> 33.297: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0
>
> - Windows Genuine Advantage Notification KB905474 v1.5.530.0 used to work
> perfectly without showing any of these error logs, why do these logs keep on
> showing up ?
>
> Thank You,
Page generated in 1,713,511,451.84569 seconds with 11 queries