The requested operation cannot be performed on a file with a user-mappedsection open.
While attempting to enumerate service accounts using the ADMT v2 tools I'm
getting the following error on a few of my servers.
2005-03-21 16:49:47 CopyFile(C:\Program
Files\ADMT\\McsDmMsg.dll,\\computername.domainname.com\C$\Program
Files\OnePointDomainAgent\McsDmMsg.dll) rc=1224 The requested operation
cannot be performed on a file with a user-mapped section open.
2005-03-21 16:49:47 ERR2:7006 Failed to install agent on
\\computername.domainname.com, rc=1224 The requested operation cannot be
performed on a file with a user-mapped section open.
2005-03-21 16:49:47 ERR2:7005 Failed to launch agent on
\\computername.domainname.com, hr=800704c8 The requested operation
cannot be performed on a file with a user-mapped section open
What does this mean and how can I correct it?
RE: The requested operation cannot be performed on a file with a user-mapped section open.
Hi Richard,
Thanks for posting!
Based on the description, I would like to provide you with the following
information for your reference:
1.) Verify the target computers have the C$ and ADMIN$ shares created.
2.) Verify that the account you are using to run ADMT is logged on with an
account that has access to the C$ and ADMIN$ share on the target machine
(the account you are trying to migrate.)
3.) Verify that you can create a file on C$ and down the path.
4.) See if there are any remnants of a previously attempted migration (look
for the MCSDMSG.DLL file.)
5.) If it is there - see if you can delete it. If you cannot delete it, try
to rename it. If successful, then re-attempt the migration.
I hope my information helps. If there is anything that is unclear, please
feel free to let me know.
Thanks & Regards,
Jason Tan
Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
Re: RE: The requested operation cannot be performed on a file with auser-mapped section open.
Thank you for the prompt response.
Something was holding the McsDmMsg.dll file open. I was able to get
around the problem by renaming the folder.
Re: The requested operation cannot be performed on a file with a user-mappedsection open.
Hello,
Thank you for your post.
I'm not quite sure about the exact issue. Please help answer the following
questions before we go further.
1. Please copy and post back the whole error messages when the issue
occurred.
2. Please describe it in detail what operation you had done when the issue
occurred.
3. Please tell me what version of ADMT tool did you use for the migration.
4. I notice that in the original thread of "The requested operation cannot
be performed on a file with a user-mapped section open", the resolution is
to rename McsDmMsg.dll file. Have you ever tried this and did this solution
help?
Thanks again for your time and I look forward to hearing from you soon.
Sincerely,
Neo Zhu,
Microsoft Online Support
Microsoft Global Technical Support Center
Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: okanogan <okanogan.38rjne@DoNotSpam.com>
| Subject: Re: The requested operation cannot be performed on a file with a
user-mappedsection open.
| Date: Fri, 2 May 2008 08:14:56 +0530
| Message-ID: <okanogan.38rjne@DoNotSpam.com>
| Organization: Computer Help - http://forums.techarena.in
| User-Agent: vBulletin USENET gateway
| X-Newsreader: vBulletin USENET gateway
| X-Originating-IP: 99.232.69.2
| References: <uAMK6HmLFHA.1308@tk2msftngp13.phx.gbl>
| Newsgroups: microsoft.public.windows.server.migration
| NNTP-Posting-Host: hostname.techarena.in 207.58.143.175
| Lines: 1
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.migration:3528
| X-Tomcat-NG: microsoft.public.windows.server.migration
|
|
Evening;
|
| I have the same error happening on my laptop when I log into.
|
| "the requested operation cannot be performed on a file with a
user-mapped section open."
|
| I am not a technically savy person.
|
| percy
--
okanogan
------------------------------------------------------------------------
okanogan's Profile: http://forums.techarena.in/member.php?userid=47930
View this thread: http://forums.techarena.in/showthread.php?t=64116
http://forums.techarena.in
|
Re: The requested operation cannot be performed on a file with a user-mappedsection open.
Hello,
Thank you for the reply.
I'd like to confirm the following questions first:
1. Did you receive this error message after you perform some operation? If
so, please describe the operations that you performed and the environment
in detail.
2. Are you using ADMT for migration?
3. Please tell me the operating system version on your laptop and whether
you have installed the latest Windows Service Pack on it.
4. If you received the error message just after you logon Windows without
doing any other operations, please try to perform a clean boot and check
whether the issue occurs under clean boot:
Please do as follows:
1. Click Start->Run...->type msconfig and press Enter
2. Click Services tab and select Hide All Microsoft Services and Disable
All third party Services.
3. Click Startup tab and Disable All startup items
4. Click OK and choose Restart
5. After reboot, check whether the problem still occurs
Please let me know the result after you finish the test.
Thanks for your time and I look forward to hearing from you soon. :)
Sincerely,
Neo Zhu,
Microsoft Online Support
Microsoft Global Technical Support Center
Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: okanogan <okanogan.38sjre@DoNotSpam.com>
| Subject: Re: The requested operation cannot be performed on a file with a
user-mappedsection open.
| Date: Fri, 2 May 2008 21:36:54 +0530
| Message-ID: <okanogan.38sjre@DoNotSpam.com>
| Organization: Computer Help - http://forums.techarena.in
| User-Agent: vBulletin USENET gateway
| X-Newsreader: vBulletin USENET gateway
| X-Originating-IP: 99.232.69.2
| References: <uAMK6HmLFHA.1308@tk2msftngp13.phx.gbl>
<okanogan.38rjne@DoNotSpam.com> <#YWoqADrIHA.1784@TK2MSFTNGHUB02.phx.gbl>
| Newsgroups: microsoft.public.windows.server.migration
| NNTP-Posting-Host: hostname.techarena.in 207.58.143.175
| Lines: 1
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP06.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.migration:3532
| X-Tomcat-NG: microsoft.public.windows.server.migration
|
|
morning;
|
| I have searched my computer for the file you mentioned in your previous
message; I have no such file on my laptop.
|
| the error message happened when I turn my laptop on:
|
| ERROR
|
| "the requested operation cannot be performed on a file with a
user-mapped section open."
|
| percy
--
okanogan
------------------------------------------------------------------------
okanogan's Profile: http://forums.techarena.in/member.php?userid=47930
View this thread: http://forums.techarena.in/showthread.php?t=64116
http://forums.techarena.in
|
Re: The requested operation cannot be performed on a file with a user-mappedsection open.
Hello,
Regarding your last email , I am just check and follow-up on your status.
I was wondering , if you were available to try conduct test and answer my
questions.
Thank you for your time and attention.
Sincerely,
Neo Zhu,
Microsoft Online Support
Microsoft Global Technical Support Center
Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| X-Tomcat-ID: 77421099
| References: <uAMK6HmLFHA.1308@tk2msftngp13.phx.gbl>
<okanogan.38rjne@DoNotSpam.com> <#YWoqADrIHA.1784@TK2MSFTNGHUB02.phx.gbl>
<okanogan.38sjre@DoNotSpam.com>
| MIME-Version: 1.0
| Content-Type: text/plain
| Content-Transfer-Encoding: 7bit
| From: v-jpzhu@online.microsoft.com (Jian-Ping Zhu [MSFT])
| Organization: Microsoft
| Date: Mon, 05 May 2008 10:27:57 GMT
| Subject: Re: The requested operation cannot be performed on a file with a
user-mappedsection open.
| X-Tomcat-NG: microsoft.public.windows.server.migration
| Message-ID: <lKh2wqprIHA.4284@TK2MSFTNGHUB02.phx.gbl>
| Newsgroups: microsoft.public.windows.server.migration
| Lines: 77
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.migration:3553
| NNTP-Posting-Host: tk5tomimport1.phx.gbl 10.201.218.19
|
| Hello,
|
| Thank you for the reply.
|
| I'd like to confirm the following questions first:
|
| 1. Did you receive this error message after you perform some operation?
If
| so, please describe the operations that you performed and the environment
| in detail.
|
| 2. Are you using ADMT for migration?
|
| 3. Please tell me the operating system version on your laptop and whether
| you have installed the latest Windows Service Pack on it.
|
| 4. If you received the error message just after you logon Windows without
| doing any other operations, please try to perform a clean boot and check
| whether the issue occurs under clean boot:
|
| Please do as follows:
|
| 1. Click Start->Run...->type msconfig and press Enter
| 2. Click Services tab and select Hide All Microsoft Services and Disable
| All third party Services.
| 3. Click Startup tab and Disable All startup items
| 4. Click OK and choose Restart
| 5. After reboot, check whether the problem still occurs
|
| Please let me know the result after you finish the test.
|
| Thanks for your time and I look forward to hearing from you soon. :)
|
| Sincerely,
| Neo Zhu,
| Microsoft Online Support
| Microsoft Global Technical Support Center
|
| Get Secure! - www.microsoft.com/security
| =====================================================
| When responding to posts, please "Reply to Group" via your newsreader so
| that others may learn and benefit from your issue.
| =====================================================
| This posting is provided "AS IS" with no warranties, and confers no
rights.
|
| --------------------
| | From: okanogan <okanogan.38sjre@DoNotSpam.com>
| | Subject: Re: The requested operation cannot be performed on a file with
a
| user-mappedsection open.
| | Date: Fri, 2 May 2008 21:36:54 +0530
| | Message-ID: <okanogan.38sjre@DoNotSpam.com>
| | Organization: Computer Help - http://forums.techarena.in
| | User-Agent: vBulletin USENET gateway
| | X-Newsreader: vBulletin USENET gateway
| | X-Originating-IP: 99.232.69.2
| | References: <uAMK6HmLFHA.1308@tk2msftngp13.phx.gbl>
| <okanogan.38rjne@DoNotSpam.com> <#YWoqADrIHA.1784@TK2MSFTNGHUB02.phx.gbl>
| | Newsgroups: microsoft.public.windows.server.migration
| | NNTP-Posting-Host: hostname.techarena.in 207.58.143.175
| | Lines: 1
| | Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP06.phx.gbl
| | Xref: TK2MSFTNGHUB02.phx.gbl
| microsoft.public.windows.server.migration:3532
| | X-Tomcat-NG: microsoft.public.windows.server.migration
| |
| |
| morning;
| |
| | I have searched my computer for the file you mentioned in your previous
| message; I have no such file on my laptop.
| |
| | the error message happened when I turn my laptop on:
| |
| | ERROR
| |
| | "the requested operation cannot be performed on a file with a
| user-mapped section open."
| |
| | percy
|
|
| --
| okanogan
| ------------------------------------------------------------------------
| okanogan's Profile: http://forums.techarena.in/member.php?userid=47930
| View this thread: http://forums.techarena.in/showthread.php?t=64116
|
| http://forums.techarena.in
|
| |
|
|
Error "The requested operation cannot be performed on a file with a user-mappedsection open."
Hi,
I have this problem when i turn on my laptop, and it reach the desktop screen and the error message display pop up. It say "The requested operation cannot be performed on a file with a user-mappedsection open"
I have seen the previous method u post and try it. After restarting, the error message never display. So what should i do next ?
Thanks.
Yours sincerely,
Joe
Error "The requested operation cannot be performed on a file with a user-mappedsection open."
Hi,
I have this problem when i turn on my laptop, and it reach the desktop screen and the error message display pop up. It says "The requested operation cannot be performed on a file with a user-mappedsection open"
I have seen the previous method u post and try it. After restarting, the error message never display. So what should i do next ?
Thanks.
Yours sincerely,
Joe
