Transfer digital camcorder tapes to DVD
Here are the things needed for this job:
1. a digital Camcorder.
2. a PC with IEEE 1394 (Firewire) port, running Windows 2000 or Windows XP. In order to do the real-time DVD conversion, you PC should be Fast Enough, which means the PC should have at least a Pentium 4 2.0GHz or faster CPU, at least 256MB RAM, and at least 5GB free hard disk space.
3. an IEEE 1394 cable.
Step 1, Connect an IEEE 1394 (Firewire) cable to miniDV Camcorder.
Connect an IEEE 1394 (Firewire) cable to your miniDV camcorder. Turn on your camcorder and switch the mode to VCR mode.
http://www.soft29.com/images/guides/guidedvdSanta1.jpg
Step 2, Connect the IEEE 1394 (Firewire) cable to your PC's IEEE1394 port.
Connect the other end of the IEEE 1394 (Firewire) cable to your PC's IEEE 1394 port. (If your PC does not have IEEE 1394 port, you will need to purchase and install an IEEE 1394 card on your PC.)
http://www.soft29.com/images/guides/guidedvdSanta2.jpg
Step 3, Run dvdSanta and burn the DVD.
Run dvdSanta, click the "Digital Camcorder Direct to DVD" button.
http://www.soft29.com/images/guides/guidedvdSanta3.jpg
Use the buttons on the left side to control your camcorder. You can play, stop, rewind your tape. If you want to transfer a whole tape, click the "Rewind" button to rewind the tape to its beginning.
http://www.soft29.com/images/guides/guidedvdSanta4.jpg
Then, click "Play and Capture" button to start transferring the miniDV tape into DVD video.
http://www.soft29.com/images/guides/guidedvdSanta5.jpg
Now the transferring begins. Wait until it ends. If you want to stop in the middle, click the cancel button. After the transferring completes, click "Create DVD" button to burn your DVD video.
http://www.soft29.com/images/guides/guidedvdSanta6.jpg
dvdSanta has done preparing the DVD video, now it's time to burn your disc.
Before you burn the disc, you can use a software DVD player such as PowerDVD to examine the DVD video created by dvdSanta. The DVD video is stored under c:\TempDVD\VIDEO_TS folder.
Now you can insert a blanc DVD-R/+R disc in your DVD burner now and click "Yes" to continue.
If you want to burn this DVD disc later, you can click "No" button now and quit dvdSanta. The DVD video is stored under C:\TempDVD\VIDEO_TS folder.
http://www.soft29.com/images/guides/guidedvdSanta7.jpg
If you are a using DVD+R/RW disc, just click "Burn!" and wait dvdSanta finish the burning job. If you are using a DVD-R/RW disc, you should select burning speed to 1x,2x,or 4x, then click the "Burn!" button to burn the disc.
http://www.soft29.com/images/guides/guidedvdSanta8.jpg
Done! When the burning is finished, you can play your newly made DVD in your DVD player and watch the home video on TV!
