WINDOWS UPDATE NOT WORKING
my auto update hasn't worked right since i downloaded windows sp2.i have
fixed it two times and each time i get a different code. the last code was
0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
i went and switched it off and back on and now a error says it is up for
deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
a error code for 0x80070430. can anyone help please.
RE: WINDOWS UPDATE NOT WORKING
Hi,
The 0x8DDD0018 error occurs when there's a problem with the necessary
services, Automatic Update and/or the Background Intelligent Transfer Service
(BITS).
Set Automatic Update service to Automatic and verify the Status is Started
and verify the Background Intelligent Transfer Service (BITS) to Manual.
Kindly try this & let me know.
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, right-click on Automatic Updates and then click
Properties.
4. In the Startup type list, select Automatic and click Apply
5. Verify that the Service status is started, if the Service Status is
Stopped click on the Start Button.
6. In the list of services, right-click on Background Intelligent Transfer
Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply
8. Verify that the Service status is started, If the Service Status is
Stopped click on the Start Button.
9. Click OK.
Regards
DEVIL
"RICK" wrote:
> my auto update hasn't worked right since i downloaded windows sp2.i have
> fixed it two times and each time i get a different code. the last code was
> 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> i went and switched it off and back on and now a error says it is up for
> deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> a error code for 0x80070430. can anyone help please.
Re: WINDOWS UPDATE NOT WORKING
RICK wrote:
> my auto update hasn't worked right since i downloaded windows sp2.i have
> fixed it two times and each time i get a different code. the last code was
> 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> i went and switched it off and back on and now a error says it is up for
> deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> a error code for 0x80070430. can anyone help please.
Hi
Try this:
Start regedit.exe and delete the following key (contains the WU
service configuration):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
Do a reboot now!
Then run this command line (from a command prompt of from Start/Run, it
installs the AutoUpdate service (line will wrap in the newsreader!):
%SystemRoot%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall
132 %SystemRoot%\inf\au.inf
(it must be a space between DefaultInstall and 132)
If it asks for your OS CD-ROM to get some files, just point it to the
folder %windir%\System32 (%windir% is typically C:\Windows).
Then run the following commands:
regsvr32.exe wuaueng.dll
regsvr32.exe wuapi.dll
regsvr32.exe wups.dll
regsvr32.exe wucltui.dll
Do a reboot again.
Then check if you can start and stop the Automatic Updates service
successfully from services.msc
--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scr...r/default.mspx
RE: WINDOWS UPDATE NOT WORKING
seems to work for now we'll see how long it will last. thanks
"Devil" wrote:
> Hi,
>
> The 0x8DDD0018 error occurs when there's a problem with the necessary
> services, Automatic Update and/or the Background Intelligent Transfer Service
> (BITS).
>
> Set Automatic Update service to Automatic and verify the Status is Started
> and verify the Background Intelligent Transfer Service (BITS) to Manual.
>
> Kindly try this & let me know.
>
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, right-click on Automatic Updates and then click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, right-click on Background Intelligent Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. Click OK.
>
> Regards
>
> DEVIL
>
> "RICK" wrote:
>
> > my auto update hasn't worked right since i downloaded windows sp2.i have
> > fixed it two times and each time i get a different code. the last code was
> > 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> > i went and switched it off and back on and now a error says it is up for
> > deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> > a error code for 0x80070430. can anyone help please.
Re: WINDOWS UPDATE NOT WORKING
well so far so good thanks
"Torgeir Bakken (MVP)" wrote:
> RICK wrote:
>
> > my auto update hasn't worked right since i downloaded windows sp2.i have
> > fixed it two times and each time i get a different code. the last code was
> > 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> > i went and switched it off and back on and now a error says it is up for
> > deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> > a error code for 0x80070430. can anyone help please.
> Hi
>
> Try this:
>
> Start regedit.exe and delete the following key (contains the WU
> service configuration):
>
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
>
> Do a reboot now!
>
> Then run this command line (from a command prompt of from Start/Run, it
> installs the AutoUpdate service (line will wrap in the newsreader!):
>
> %SystemRoot%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall
> 132 %SystemRoot%\inf\au.inf
>
> (it must be a space between DefaultInstall and 132)
>
> If it asks for your OS CD-ROM to get some files, just point it to the
> folder %windir%\System32 (%windir% is typically C:\Windows).
>
> Then run the following commands:
>
> regsvr32.exe wuaueng.dll
> regsvr32.exe wuapi.dll
> regsvr32.exe wups.dll
> regsvr32.exe wucltui.dll
>
> Do a reboot again.
>
> Then check if you can start and stop the Automatic Updates service
> successfully from services.msc
>
>
>
> --
> torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> Administration scripting examples and an ONLINE version of
> the 1328 page Scripting Guide:
> http://www.microsoft.com/technet/scr...r/default.mspx
>
Re: WINDOWS UPDATE NOT WORKING
When I start the PC the automatic updates is not available, then I check in
the services and it is disable, then when I click for enabling it I received
following message :
"Such service is ready to be deleted"
If I try to run : regsvr32.exe wuaueng.dll then the system returns :
Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
Then I re-start the PC and then service is disable but then I can change to
enable it.
Thks for your help
MIGUEL
"RICK" wrote:
> well so far so good thanks
>
> "Torgeir Bakken (MVP)" wrote:
>
> > RICK wrote:
> >
> > > my auto update hasn't worked right since i downloaded windows sp2.i have
> > > fixed it two times and each time i get a different code. the last code was
> > > 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> > > i went and switched it off and back on and now a error says it is up for
> > > deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> > > a error code for 0x80070430. can anyone help please.
> > Hi
> >
> > Try this:
> >
> > Start regedit.exe and delete the following key (contains the WU
> > service configuration):
> >
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
> >
> > Do a reboot now!
> >
> > Then run this command line (from a command prompt of from Start/Run, it
> > installs the AutoUpdate service (line will wrap in the newsreader!):
> >
> > %SystemRoot%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall
> > 132 %SystemRoot%\inf\au.inf
> >
> > (it must be a space between DefaultInstall and 132)
> >
> > If it asks for your OS CD-ROM to get some files, just point it to the
> > folder %windir%\System32 (%windir% is typically C:\Windows).
> >
> > Then run the following commands:
> >
> > regsvr32.exe wuaueng.dll
> > regsvr32.exe wuapi.dll
> > regsvr32.exe wups.dll
> > regsvr32.exe wucltui.dll
> >
> > Do a reboot again.
> >
> > Then check if you can start and stop the Automatic Updates service
> > successfully from services.msc
> >
> >
> >
> > --
> > torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> > Administration scripting examples and an ONLINE version of
> > the 1328 page Scripting Guide:
> > http://www.microsoft.com/technet/scr...r/default.mspx
> >
Re: WINDOWS UPDATE NOT WORKING
MIGUEL wrote:
> When I start the PC the automatic updates is not available, then I check in
> the services and it is disable, then when I click for enabling it I received
> following message :
>
> "Such service is ready to be deleted"
>
> If I try to run : regsvr32.exe wuaueng.dll then the system returns :
>
> Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
>
> Then I re-start the PC and then service is disable but then I can change to
> enable it.
Hi
Start regedit.exe and locate the key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
If you find a DeleteFlag value there, delete the DeleteFlag value
and see if that helps.
You should also scan your computer for Spyware and Parasites
(might be the cause for the DeleteFlag value):
Dealing with Unwanted Spyware and Parasites
http://www.mvps.org/winhelp2002/unwanted.htm
The Parasite Fight Quick Fix Protocol
http://aumha.org/a/quickfix.htm
--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scr...r/default.mspx
Re: WINDOWS UPDATE NOT WORKING
I restarted the PC, then I checked wz Ad-Aware & Mcafee antivirus but I
didn't found anything wrong & bad. I checked with regedit and I didn't found
that line, then I run : regsvr32.exe wuaueng.dll and the line appeared. No
any delete flag inserted.
It is quite strange ... I will see next time I rstart the PC and I will
advise to you.
Thks a lot
Miguel
"Torgeir Bakken (MVP)" wrote:
> MIGUEL wrote:
>
> > When I start the PC the automatic updates is not available, then I check in
> > the services and it is disable, then when I click for enabling it I received
> > following message :
> >
> > "Such service is ready to be deleted"
> >
> > If I try to run : regsvr32.exe wuaueng.dll then the system returns :
> >
> > Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
> >
> > Then I re-start the PC and then service is disable but then I can change to
> > enable it.
> Hi
>
> Start regedit.exe and locate the key
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
>
>
> If you find a DeleteFlag value there, delete the DeleteFlag value
> and see if that helps.
>
> You should also scan your computer for Spyware and Parasites
> (might be the cause for the DeleteFlag value):
>
> Dealing with Unwanted Spyware and Parasites
> http://www.mvps.org/winhelp2002/unwanted.htm
>
> The Parasite Fight Quick Fix Protocol
> http://aumha.org/a/quickfix.htm
>
>
> --
> torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> Administration scripting examples and an ONLINE version of
> the 1328 page Scripting Guide:
> http://www.microsoft.com/technet/scr...r/default.mspx
>
Re: WINDOWS UPDATE NOT WORKING
I re-started the PC, then in regedit it appeared the DELETE FLAG .. then I
deleted it and I run regsvr32.exe wuaueng.dll. Then I re-started again then I
run regedit and the DELETE FLAG appeared again ... I don't know if it is or
not a error of SP2 because I haven't any virus or spyware on my PC ... I
don't know.
"Miguel" wrote:
> I restarted the PC, then I checked wz Ad-Aware & Mcafee antivirus but I
> didn't found anything wrong & bad. I checked with regedit and I didn't found
> that line, then I run : regsvr32.exe wuaueng.dll and the line appeared. No
> any delete flag inserted.
>
> It is quite strange ... I will see next time I rstart the PC and I will
> advise to you.
>
> Thks a lot
> Miguel
>
> "Torgeir Bakken (MVP)" wrote:
>
> > MIGUEL wrote:
> >
> > > When I start the PC the automatic updates is not available, then I check in
> > > the services and it is disable, then when I click for enabling it I received
> > > following message :
> > >
> > > "Such service is ready to be deleted"
> > >
> > > If I try to run : regsvr32.exe wuaueng.dll then the system returns :
> > >
> > > Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
> > >
> > > Then I re-start the PC and then service is disable but then I can change to
> > > enable it.
> > Hi
> >
> > Start regedit.exe and locate the key
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
> >
> >
> > If you find a DeleteFlag value there, delete the DeleteFlag value
> > and see if that helps.
> >
> > You should also scan your computer for Spyware and Parasites
> > (might be the cause for the DeleteFlag value):
> >
> > Dealing with Unwanted Spyware and Parasites
> > http://www.mvps.org/winhelp2002/unwanted.htm
> >
> > The Parasite Fight Quick Fix Protocol
> > http://aumha.org/a/quickfix.htm
> >
> >
> > --
> > torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> > Administration scripting examples and an ONLINE version of
> > the 1328 page Scripting Guide:
> > http://www.microsoft.com/technet/scr...r/default.mspx
> >
Re: WINDOWS UPDATE NOT WORKING
Now after enable and start wuaueng and after 15 min. the service was deleted
.... I don't understand.
I need any support
Thks
Miguel
"MIGUEL" wrote:
> I re-started the PC, then in regedit it appeared the DELETE FLAG .. then I
> deleted it and I run regsvr32.exe wuaueng.dll. Then I re-started again then I
> run regedit and the DELETE FLAG appeared again ... I don't know if it is or
> not a error of SP2 because I haven't any virus or spyware on my PC ... I
> don't know.
>
> "Miguel" wrote:
>
> > I restarted the PC, then I checked wz Ad-Aware & Mcafee antivirus but I
> > didn't found anything wrong & bad. I checked with regedit and I didn't found
> > that line, then I run : regsvr32.exe wuaueng.dll and the line appeared. No
> > any delete flag inserted.
> >
> > It is quite strange ... I will see next time I rstart the PC and I will
> > advise to you.
> >
> > Thks a lot
> > Miguel
> >
> > "Torgeir Bakken (MVP)" wrote:
> >
> > > MIGUEL wrote:
> > >
> > > > When I start the PC the automatic updates is not available, then I check in
> > > > the services and it is disable, then when I click for enabling it I received
> > > > following message :
> > > >
> > > > "Such service is ready to be deleted"
> > > >
> > > > If I try to run : regsvr32.exe wuaueng.dll then the system returns :
> > > >
> > > > Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
> > > >
> > > > Then I re-start the PC and then service is disable but then I can change to
> > > > enable it.
> > > Hi
> > >
> > > Start regedit.exe and locate the key
> > > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
> > >
> > >
> > > If you find a DeleteFlag value there, delete the DeleteFlag value
> > > and see if that helps.
> > >
> > > You should also scan your computer for Spyware and Parasites
> > > (might be the cause for the DeleteFlag value):
> > >
> > > Dealing with Unwanted Spyware and Parasites
> > > http://www.mvps.org/winhelp2002/unwanted.htm
> > >
> > > The Parasite Fight Quick Fix Protocol
> > > http://aumha.org/a/quickfix.htm
> > >
> > >
> > > --
> > > torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> > > Administration scripting examples and an ONLINE version of
> > > the 1328 page Scripting Guide:
> > > http://www.microsoft.com/technet/scr...r/default.mspx
> > >
Re: WINDOWS UPDATE NOT WORKING
I don't understand after each re-starting the system add DELETEFLAG to the
service : wuauserv
I don't know how to solve it ...
"MIGUEL" wrote:
> Now after enable and start wuaueng and after 15 min. the service was deleted
> ... I don't understand.
>
> I need any support
> Thks
> Miguel
>
> "MIGUEL" wrote:
>
> > I re-started the PC, then in regedit it appeared the DELETE FLAG .. then I
> > deleted it and I run regsvr32.exe wuaueng.dll. Then I re-started again then I
> > run regedit and the DELETE FLAG appeared again ... I don't know if it is or
> > not a error of SP2 because I haven't any virus or spyware on my PC ... I
> > don't know.
> >
> > "Miguel" wrote:
> >
> > > I restarted the PC, then I checked wz Ad-Aware & Mcafee antivirus but I
> > > didn't found anything wrong & bad. I checked with regedit and I didn't found
> > > that line, then I run : regsvr32.exe wuaueng.dll and the line appeared. No
> > > any delete flag inserted.
> > >
> > > It is quite strange ... I will see next time I rstart the PC and I will
> > > advise to you.
> > >
> > > Thks a lot
> > > Miguel
> > >
> > > "Torgeir Bakken (MVP)" wrote:
> > >
> > > > MIGUEL wrote:
> > > >
> > > > > When I start the PC the automatic updates is not available, then I check in
> > > > > the services and it is disable, then when I click for enabling it I received
> > > > > following message :
> > > > >
> > > > > "Such service is ready to be deleted"
> > > > >
> > > > > If I try to run : regsvr32.exe wuaueng.dll then the system returns :
> > > > >
> > > > > Error of DllRegisterServer in wuaueng.dll. Error code : 0x80070430.
> > > > >
> > > > > Then I re-start the PC and then service is disable but then I can change to
> > > > > enable it.
> > > > Hi
> > > >
> > > > Start regedit.exe and locate the key
> > > > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
> > > >
> > > >
> > > > If you find a DeleteFlag value there, delete the DeleteFlag value
> > > > and see if that helps.
> > > >
> > > > You should also scan your computer for Spyware and Parasites
> > > > (might be the cause for the DeleteFlag value):
> > > >
> > > > Dealing with Unwanted Spyware and Parasites
> > > > http://www.mvps.org/winhelp2002/unwanted.htm
> > > >
> > > > The Parasite Fight Quick Fix Protocol
> > > > http://aumha.org/a/quickfix.htm
> > > >
> > > >
> > > > --
> > > > torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> > > > Administration scripting examples and an ONLINE version of
> > > > the 1328 page Scripting Guide:
> > > > http://www.microsoft.com/technet/scr...r/default.mspx
> > > >
Re: WINDOWS UPDATE NOT WORKING
I have the same trouble than Miguel, i follow each steps from Torgeir, each
time, reboot, and it still have the same error.. ( no spy or virus detected )
Somebody can help us ??
Re: WINDOWS UPDATE NOT WORKING
I had this same problem and recently found the answer in another section of
this user group. Go to "Windows Update General" and find the thread named
"Automatic Updates service keeps getting deleted". The problem is caused by
Trojan.Boxed.E which eludes virus and malware scans. The trojan places an
executable in C:\WINDOWS\system32 that marks Automatic Updates for deletion.
It also installs a Network Client service in services.msc. I disabled Network
Client service and AU no longer gets deleted on re-boot. To do a complete job
the executable should be deleted and the related key in the registry should
be deleted. The thread I cited has all the details.
"Maxoverfred" wrote:
> I have the same trouble than Miguel, i follow each steps from Torgeir, each
> time, reboot, and it still have the same error.. ( no spy or virus detected )
>
> Somebody can help us ??
RE: WINDOWS UPDATE NOT WORKING
Help!
When I try to change auto updates to automatic, and then click apply, the
status is stopped. So I change it to start and I gt an erro code 1058 and
the msg. The service cannot be started, either bcause it is disabled or
because it has no enabled devices associated with it.
--
V-Man
"Devil" wrote:
> Hi,
>
> The 0x8DDD0018 error occurs when there's a problem with the necessary
> services, Automatic Update and/or the Background Intelligent Transfer Service
> (BITS).
>
> Set Automatic Update service to Automatic and verify the Status is Started
> and verify the Background Intelligent Transfer Service (BITS) to Manual.
>
> Kindly try this & let me know.
>
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, right-click on Automatic Updates and then click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, right-click on Background Intelligent Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. Click OK.
>
> Regards
>
> DEVIL
>
> "RICK" wrote:
>
> > my auto update hasn't worked right since i downloaded windows sp2.i have
> > fixed it two times and each time i get a different code. the last code was
> > 0x8ddd0018.so i went to RUN put in services.msc. auto update was disabled.
> > i went and switched it off and back on and now a error says it is up for
> > deletion. so then i went to RUN put in regsvr32whaheng.dll . and now i get
> > a error code for 0x80070430. can anyone help please.