Not enough server storage is available to process this command.
I receive this error whenever I try to connect to a windows 2000 cluster
using the cluster admin tool. I have the correct access and can bring it up
on other servers within the same domain. The error id is 1130. I modified
the IRPStackSize value without success. Any help would be appreciated.
RE: Not enough server storage is available to process this command.
I receive this error when trying to access from the command line:
C:\>cluster /cluster:xx-cl2 /prop
System error 1130 has occurred (0x0000046a).
Not enough server storage is available to process this command.
"holtitan" wrote:
>
> I receive this error whenever I try to connect to a windows 2000 cluster
> using the cluster admin tool. I have the correct access and can bring it up
> on other servers within the same domain. The error id is 1130. I modified
> the IRPStackSize value without success. Any help would be appreciated.
>
Re: Not enough server storage is available to process this command.
Can you administer the cluster when logged onto one of the cluster nodes
itself?
Your NTLM authentication settings are probably out of whack.
post the contents of the following registry key from the W2K cluster nodes.
MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
Post the contents of the following key from the system you use cluster
administrator on.
MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
--
Glenn LeCheminant
CCNA, MCSE 2000/2003 + Security
"holtitan" <holtitan@discussions.microsoft.com> wrote in message
news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
>I receive this error when trying to access from the command line:
>
> C:\>cluster /cluster:xx-cl2 /prop
>
> System error 1130 has occurred (0x0000046a).
> Not enough server storage is available to process this command.
>
> "holtitan" wrote:
>
>>
>> I receive this error whenever I try to connect to a windows 2000 cluster
>> using the cluster admin tool. I have the correct access and can bring it
>> up
>> on other servers within the same domain. The error id is 1130. I
>> modified
>> the IRPStackSize value without success. Any help would be appreciated.
>>
Re: Not enough server storage is available to process this command
"Glenn LeCheminant" wrote:
> Can you administer the cluster when logged onto one of the cluster nodes
> itself?
>
> Your NTLM authentication settings are probably out of whack.
> post the contents of the following registry key from the W2K cluster nodes.
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>
>
> Post the contents of the following key from the system you use cluster
> administrator on.
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>
>
>
>
> --
> Glenn LeCheminant
> CCNA, MCSE 2000/2003 + Security
>
> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
> >I receive this error when trying to access from the command line:
> >
> > C:\>cluster /cluster:xx-cl2 /prop
> >
> > System error 1130 has occurred (0x0000046a).
> > Not enough server storage is available to process this command.
> >
> > "holtitan" wrote:
> >
> >>
> >> I receive this error whenever I try to connect to a windows 2000 cluster
> >> using the cluster admin tool. I have the correct access and can bring it
> >> up
> >> on other servers within the same domain. The error id is 1130. I
> >> modified
> >> the IRPStackSize value without success. Any help would be appreciated.
> >>
>
>Yes, I can open cluster admin from the machine without a problem.
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
537395248
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec = 537395248
Any help that you can provide would be great.
Re: Not enough server storage is available to process this command
"holtitan" wrote:
>
>
> "Glenn LeCheminant" wrote:
>
> > Can you administer the cluster when logged onto one of the cluster nodes
> > itself?
> >
> > Your NTLM authentication settings are probably out of whack.
> > post the contents of the following registry key from the W2K cluster nodes.
> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >
> >
> > Post the contents of the following key from the system you use cluster
> > administrator on.
> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >
> >
> >
> >
> > --
> > Glenn LeCheminant
> > CCNA, MCSE 2000/2003 + Security
> >
> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
> > >I receive this error when trying to access from the command line:
> > >
> > > C:\>cluster /cluster:xx-cl2 /prop
> > >
> > > System error 1130 has occurred (0x0000046a).
> > > Not enough server storage is available to process this command.
> > >
> > > "holtitan" wrote:
> > >
> > >>
> > >> I receive this error whenever I try to connect to a windows 2000 cluster
> > >> using the cluster admin tool. I have the correct access and can bring it
> > >> up
> > >> on other servers within the same domain. The error id is 1130. I
> > >> modified
> > >> the IRPStackSize value without success. Any help would be appreciated.
> > >>
> >
> >Yes, I can open cluster admin from the cluster node without a problem.
>
> Cluster node settings
> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
>
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> 537395248
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec = 537395248
My machine (Windows XP)
MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
>
> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
>
> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec = 0
>
> Any help that you can provide would be great.
>
Re: Not enough server storage is available to process this command
Please post the same three keys from a cluster (node) that you can access
from this XP system.
--
Glenn LeCheminant
CCNA, MCSE 2000/2003 + Security
"holtitan" <holtitan@discussions.microsoft.com> wrote in message
news:D7202052-A889-404E-9F6D-6E82C4C4DC54@microsoft.com...
>
>
> "holtitan" wrote:
>
>>
>>
>> "Glenn LeCheminant" wrote:
>>
>> > Can you administer the cluster when logged onto one of the cluster
>> > nodes
>> > itself?
>> >
>> > Your NTLM authentication settings are probably out of whack.
>> > post the contents of the following registry key from the W2K cluster
>> > nodes.
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>> >
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >
>> >
>> > Post the contents of the following key from the system you use cluster
>> > administrator on.
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>> >
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >
>> >
>> >
>> >
>> > --
>> > Glenn LeCheminant
>> > CCNA, MCSE 2000/2003 + Security
>> >
>> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
>> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
>> > >I receive this error when trying to access from the command line:
>> > >
>> > > C:\>cluster /cluster:xx-cl2 /prop
>> > >
>> > > System error 1130 has occurred (0x0000046a).
>> > > Not enough server storage is available to process this command.
>> > >
>> > > "holtitan" wrote:
>> > >
>> > >>
>> > >> I receive this error whenever I try to connect to a windows 2000
>> > >> cluster
>> > >> using the cluster admin tool. I have the correct access and can
>> > >> bring it
>> > >> up
>> > >> on other servers within the same domain. The error id is 1130. I
>> > >> modified
>> > >> the IRPStackSize value without success. Any help would be
>> > >> appreciated.
>> > >>
>> >
>> >Yes, I can open cluster admin from the cluster node without a problem.
>>
>> Cluster node settings
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
>> 537395248
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
>> > 537395248
>
> My machine (Windows XP)
>
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
>>
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
>> > 0
>
>>
>> Any help that you can provide would be great.
>>
Re: Not enough server storage is available to process this command
Glenn,
I cannot access the node from my XP Pro machine.
Registry settings:
> My machine (Windows XP)
>
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
>>
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =0
>> >
I can access it from within the cluster (either node)
Registry settings (both nodes have the same settings):
Cluster node(s) settings
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
>> 537395248
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
>> > 537395248
A machine that is not in the cluster (Windows 2003 member server) i can
access the cluster using Cluster Admin.
Registry settings:
W2K3 member server registry settings
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =0
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =0
This whole this has me stumped. Any help would be appreciated.
"Glenn LeCheminant" wrote:
> Please post the same three keys from a cluster (node) that you can access
> from this XP system.
>
>
> --
> Glenn LeCheminant
> CCNA, MCSE 2000/2003 + Security
>
> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> news:D7202052-A889-404E-9F6D-6E82C4C4DC54@microsoft.com...
> >
> >
> > "holtitan" wrote:
> >
> >>
> >>
> >> "Glenn LeCheminant" wrote:
> >>
> >> > Can you administer the cluster when logged onto one of the cluster
> >> > nodes
> >> > itself?
> >> >
> >> > Your NTLM authentication settings are probably out of whack.
> >> > post the contents of the following registry key from the W2K cluster
> >> > nodes.
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >> >
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >
> >> >
> >> > Post the contents of the following key from the system you use cluster
> >> > administrator on.
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >> >
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >
> >> >
> >> >
> >> >
> >> > --
> >> > Glenn LeCheminant
> >> > CCNA, MCSE 2000/2003 + Security
> >> >
> >> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> >> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
> >> > >I receive this error when trying to access from the command line:
> >> > >
> >> > > C:\>cluster /cluster:xx-cl2 /prop
> >> > >
> >> > > System error 1130 has occurred (0x0000046a).
> >> > > Not enough server storage is available to process this command.
> >> > >
> >> > > "holtitan" wrote:
> >> > >
> >> > >>
> >> > >> I receive this error whenever I try to connect to a windows 2000
> >> > >> cluster
> >> > >> using the cluster admin tool. I have the correct access and can
> >> > >> bring it
> >> > >> up
> >> > >> on other servers within the same domain. The error id is 1130. I
> >> > >> modified
> >> > >> the IRPStackSize value without success. Any help would be
> >> > >> appreciated.
> >> > >>
> >> >
> >> >Yes, I can open cluster admin from the cluster node without a problem.
> >>
> >> Cluster node settings
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
> >>
> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> >> 537395248
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
> >> > 537395248
> >
> > My machine (Windows XP)
> >
> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
> >>
> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
> >>
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
> >> > 0
> >
> >>
> >> Any help that you can provide would be great.
> >>
>
>
>
Re: Not enough server storage is available to process this command
Set your XP box to the following.
MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
Reboot your box.
go back into the registry, and verify it did not get set back to 0.
Then see if you can access the cluster through cluster admin.
"holtitan" <holtitan@discussions.microsoft.com> wrote in message
news:9553F222-7ACF-4A31-B599-A0B2AB362197@microsoft.com...
> Glenn,
> I cannot access the node from my XP Pro machine.
>
> Registry settings:
>> My machine (Windows XP)
>>
>> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
>>>
>>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
>>>
>>> >
>>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>>> > =0
>>> >
>
> I can access it from within the cluster (either node)
>
> Registry settings (both nodes have the same settings):
>
>
> Cluster node(s) settings
>>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
>>>
>>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
>>> 537395248
>>> >
>>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
>>> > 537395248
>
> A machine that is not in the cluster (Windows 2003 member server) i can
> access the cluster using Cluster Admin.
>
> Registry settings:
>
> W2K3 member server registry settings
>>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
>>>
>>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =0
>>> >
>>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>>> > =0
>
> This whole this has me stumped. Any help would be appreciated.
>
> "Glenn LeCheminant" wrote:
>
>> Please post the same three keys from a cluster (node) that you can access
>> from this XP system.
>>
>>
>> --
>> Glenn LeCheminant
>> CCNA, MCSE 2000/2003 + Security
>>
>> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
>> news:D7202052-A889-404E-9F6D-6E82C4C4DC54@microsoft.com...
>> >
>> >
>> > "holtitan" wrote:
>> >
>> >>
>> >>
>> >> "Glenn LeCheminant" wrote:
>> >>
>> >> > Can you administer the cluster when logged onto one of the cluster
>> >> > nodes
>> >> > itself?
>> >> >
>> >> > Your NTLM authentication settings are probably out of whack.
>> >> > post the contents of the following registry key from the W2K cluster
>> >> > nodes.
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>> >> >
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >> >
>> >> >
>> >> > Post the contents of the following key from the system you use
>> >> > cluster
>> >> > administrator on.
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
>> >> >
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > Glenn LeCheminant
>> >> > CCNA, MCSE 2000/2003 + Security
>> >> >
>> >> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
>> >> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
>> >> > >I receive this error when trying to access from the command line:
>> >> > >
>> >> > > C:\>cluster /cluster:xx-cl2 /prop
>> >> > >
>> >> > > System error 1130 has occurred (0x0000046a).
>> >> > > Not enough server storage is available to process this command.
>> >> > >
>> >> > > "holtitan" wrote:
>> >> > >
>> >> > >>
>> >> > >> I receive this error whenever I try to connect to a windows 2000
>> >> > >> cluster
>> >> > >> using the cluster admin tool. I have the correct access and can
>> >> > >> bring it
>> >> > >> up
>> >> > >> on other servers within the same domain. The error id is 1130.
>> >> > >> I
>> >> > >> modified
>> >> > >> the IRPStackSize value without success. Any help would be
>> >> > >> appreciated.
>> >> > >>
>> >> >
>> >> >Yes, I can open cluster admin from the cluster node without a
>> >> >problem.
>> >>
>> >> Cluster node settings
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel =
>> >> > 1
>> >>
>> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
>> >> 537395248
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >> > =
>> >> > 537395248
>> >
>> > My machine (Windows XP)
>> >
>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
>> >>
>> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
>> >> 0
>> >>
>> >> >
>> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
>> >> > =
>> >> > 0
>> >
>> >>
>> >> Any help that you can provide would be great.
>> >>
>>
>>
>>
Re: Not enough server storage is available to process this command
That didn't work. Same error occured. Any other ideas?
"Glenn L" wrote:
> Set your XP box to the following.
> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
> Reboot your box.
> go back into the registry, and verify it did not get set back to 0.
> Then see if you can access the cluster through cluster admin.
>
>
> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> news:9553F222-7ACF-4A31-B599-A0B2AB362197@microsoft.com...
> > Glenn,
> > I cannot access the node from my XP Pro machine.
> >
> > Registry settings:
> >> My machine (Windows XP)
> >>
> >> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
> >>>
> >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
> >>>
> >>> >
> >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >>> > =0
> >>> >
> >
> > I can access it from within the cluster (either node)
> >
> > Registry settings (both nodes have the same settings):
> >
> >
> > Cluster node(s) settings
> >>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
> >>>
> >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> >>> 537395248
> >>> >
> >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
> >>> > 537395248
> >
> > A machine that is not in the cluster (Windows 2003 member server) i can
> > access the cluster using Cluster Admin.
> >
> > Registry settings:
> >
> > W2K3 member server registry settings
> >>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
> >>>
> >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =0
> >>> >
> >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >>> > =0
> >
> > This whole this has me stumped. Any help would be appreciated.
> >
> > "Glenn LeCheminant" wrote:
> >
> >> Please post the same three keys from a cluster (node) that you can access
> >> from this XP system.
> >>
> >>
> >> --
> >> Glenn LeCheminant
> >> CCNA, MCSE 2000/2003 + Security
> >>
> >> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> >> news:D7202052-A889-404E-9F6D-6E82C4C4DC54@microsoft.com...
> >> >
> >> >
> >> > "holtitan" wrote:
> >> >
> >> >>
> >> >>
> >> >> "Glenn LeCheminant" wrote:
> >> >>
> >> >> > Can you administer the cluster when logged onto one of the cluster
> >> >> > nodes
> >> >> > itself?
> >> >> >
> >> >> > Your NTLM authentication settings are probably out of whack.
> >> >> > post the contents of the following registry key from the W2K cluster
> >> >> > nodes.
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >> >> >
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >> >
> >> >> >
> >> >> > Post the contents of the following key from the system you use
> >> >> > cluster
> >> >> > administrator on.
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> >> >> >
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Glenn LeCheminant
> >> >> > CCNA, MCSE 2000/2003 + Security
> >> >> >
> >> >> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> >> >> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
> >> >> > >I receive this error when trying to access from the command line:
> >> >> > >
> >> >> > > C:\>cluster /cluster:xx-cl2 /prop
> >> >> > >
> >> >> > > System error 1130 has occurred (0x0000046a).
> >> >> > > Not enough server storage is available to process this command.
> >> >> > >
> >> >> > > "holtitan" wrote:
> >> >> > >
> >> >> > >>
> >> >> > >> I receive this error whenever I try to connect to a windows 2000
> >> >> > >> cluster
> >> >> > >> using the cluster admin tool. I have the correct access and can
> >> >> > >> bring it
> >> >> > >> up
> >> >> > >> on other servers within the same domain. The error id is 1130.
> >> >> > >> I
> >> >> > >> modified
> >> >> > >> the IRPStackSize value without success. Any help would be
> >> >> > >> appreciated.
> >> >> > >>
> >> >> >
> >> >> >Yes, I can open cluster admin from the cluster node without a
> >> >> >problem.
> >> >>
> >> >> Cluster node settings
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel =
> >> >> > 1
> >> >>
> >> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> >> >> 537395248
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >> > =
> >> >> > 537395248
> >> >
> >> > My machine (Windows XP)
> >> >
> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
> >> >>
> >> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> >> >> 0
> >> >>
> >> >> >
> >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> >> >> > =
> >> >> > 0
> >> >
> >> >>
> >> >> Any help that you can provide would be great.
> >> >>
> >>
> >>
> >>
>
>
>
Re: Not enough server storage is available to process this command
Try installing SP1 for windows server 2003. i had the same issue on my dell
file and print server. i found a specific article from dell that said the
issue occurs on cluster servers. i struggled trying to fix this problem for
about 2 months but i installed SP1 over the weekend and my problem is gone.
Make sure you check to see if all your software is compatible with SP1 before
installing it.
"holtitan" wrote:
> That didn't work. Same error occured. Any other ideas?
>
> "Glenn L" wrote:
>
> > Set your XP box to the following.
> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
> > Reboot your box.
> > go back into the registry, and verify it did not get set back to 0.
> > Then see if you can access the cluster through cluster admin.
> >
> >
> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> > news:9553F222-7ACF-4A31-B599-A0B2AB362197@microsoft.com...
> > > Glenn,
> > > I cannot access the node from my XP Pro machine.
> > >
> > > Registry settings:
> > >> My machine (Windows XP)
> > >>
> > >> MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
> > >>>
> > >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec = 0
> > >>>
> > >>> >
> > >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >>> > =0
> > >>> >
> > >
> > > I can access it from within the cluster (either node)
> > >
> > > Registry settings (both nodes have the same settings):
> > >
> > >
> > > Cluster node(s) settings
> > >>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 1
> > >>>
> > >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> > >>> 537395248
> > >>> >
> > >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec =
> > >>> > 537395248
> > >
> > > A machine that is not in the cluster (Windows 2003 member server) i can
> > > access the cluster using Cluster Admin.
> > >
> > > Registry settings:
> > >
> > > W2K3 member server registry settings
> > >>> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 2
> > >>>
> > >>> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =0
> > >>> >
> > >>> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >>> > =0
> > >
> > > This whole this has me stumped. Any help would be appreciated.
> > >
> > > "Glenn LeCheminant" wrote:
> > >
> > >> Please post the same three keys from a cluster (node) that you can access
> > >> from this XP system.
> > >>
> > >>
> > >> --
> > >> Glenn LeCheminant
> > >> CCNA, MCSE 2000/2003 + Security
> > >>
> > >> "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> > >> news:D7202052-A889-404E-9F6D-6E82C4C4DC54@microsoft.com...
> > >> >
> > >> >
> > >> > "holtitan" wrote:
> > >> >
> > >> >>
> > >> >>
> > >> >> "Glenn LeCheminant" wrote:
> > >> >>
> > >> >> > Can you administer the cluster when logged onto one of the cluster
> > >> >> > nodes
> > >> >> > itself?
> > >> >> >
> > >> >> > Your NTLM authentication settings are probably out of whack.
> > >> >> > post the contents of the following registry key from the W2K cluster
> > >> >> > nodes.
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> > >> >> >
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >> >> >
> > >> >> >
> > >> >> > Post the contents of the following key from the system you use
> > >> >> > cluster
> > >> >> > administrator on.
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel
> > >> >> >
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> > --
> > >> >> > Glenn LeCheminant
> > >> >> > CCNA, MCSE 2000/2003 + Security
> > >> >> >
> > >> >> > "holtitan" <holtitan@discussions.microsoft.com> wrote in message
> > >> >> > news:13FFE65F-BD3B-4BEA-8906-E0236E340F49@microsoft.com...
> > >> >> > >I receive this error when trying to access from the command line:
> > >> >> > >
> > >> >> > > C:\>cluster /cluster:xx-cl2 /prop
> > >> >> > >
> > >> >> > > System error 1130 has occurred (0x0000046a).
> > >> >> > > Not enough server storage is available to process this command.
> > >> >> > >
> > >> >> > > "holtitan" wrote:
> > >> >> > >
> > >> >> > >>
> > >> >> > >> I receive this error whenever I try to connect to a windows 2000
> > >> >> > >> cluster
> > >> >> > >> using the cluster admin tool. I have the correct access and can
> > >> >> > >> bring it
> > >> >> > >> up
> > >> >> > >> on other servers within the same domain. The error id is 1130.
> > >> >> > >> I
> > >> >> > >> modified
> > >> >> > >> the IRPStackSize value without success. Any help would be
> > >> >> > >> appreciated.
> > >> >> > >>
> > >> >> >
> > >> >> >Yes, I can open cluster admin from the cluster node without a
> > >> >> >problem.
> > >> >>
> > >> >> Cluster node settings
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel =
> > >> >> > 1
> > >> >>
> > >> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> > >> >> 537395248
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >> >> > =
> > >> >> > 537395248
> > >> >
> > >> > My machine (Windows XP)
> > >> >
> > >> > MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel = 0
> > >> >>
> > >> >> MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec =
> > >> >> 0
> > >> >>
> > >> >> >
> > >> >> > MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec
> > >> >> > =
> > >> >> > 0
> > >> >
> > >> >>
> > >> >> Any help that you can provide would be great.
> > >> >>
> > >>
> > >>
> > >>
> >
> >
> >
