ntbackup returned code 0x1f when running from scheduler
when running from ntbackup it works but asks for prompts!
Evan Camilleri
Printable View
ntbackup returned code 0x1f when running from scheduler
when running from ntbackup it works but asks for prompts!
Evan Camilleri
Hi Evan,
this error usually means that destination folder can't be accessed (e.g. due
to permissions or destination folder does not exist).
Make sure that account that will run the backup has sufficient permissions
on the folder (write permissions on folder and e.g. share) where the backup
will be stored and make sure that destination folder (or share) actually
exists...
Mike
"Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
> ntbackup returned code 0x1f when running from scheduler
>
> when running from ntbackup it works but asks for prompts!
>
> Evan Camilleri
>
thanks, i found in the log file that ntbackup was trying to find backup
definition xyz.bkf, where the name was 'abc xyz.bkf'.
I think it is a bug in scheduler with backup where there is a space in bkf
name!!!
Evan Camilleri
"Miha Pihler" <mihap-news@atlantis.si> wrote in message
news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
> Hi Evan,
>
> this error usually means that destination folder can't be accessed (e.g.
> due to permissions or destination folder does not exist).
>
> Make sure that account that will run the backup has sufficient permissions
> on the folder (write permissions on folder and e.g. share) where the
> backup will be stored and make sure that destination folder (or share)
> actually exists...
>
> Mike
>
> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
>> ntbackup returned code 0x1f when running from scheduler
>>
>> when running from ntbackup it works but asks for prompts!
>>
>> Evan Camilleri
>>
>
>
Evan,
If you use spaces in names you have to put them in brackets. E.g. c:\My
Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
Backup\Friday BKF file". If you don't do it, system will look for location
c:\My
Mike
"Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
> thanks, i found in the log file that ntbackup was trying to find backup
> definition xyz.bkf, where the name was 'abc xyz.bkf'.
>
> I think it is a bug in scheduler with backup where there is a space in bkf
> name!!!
>
>
> Evan Camilleri
>
>
> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
>> Hi Evan,
>>
>> this error usually means that destination folder can't be accessed (e.g.
>> due to permissions or destination folder does not exist).
>>
>> Make sure that account that will run the backup has sufficient
>> permissions on the folder (write permissions on folder and e.g. share)
>> where the backup will be stored and make sure that destination folder (or
>> share) actually exists...
>>
>> Mike
>>
>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
>>> ntbackup returned code 0x1f when running from scheduler
>>>
>>> when running from ntbackup it works but asks for prompts!
>>>
>>> Evan Camilleri
>>>
>>
>>
>
>
i did, and it took the last part!
"Miha Pihler" <mihap-news@atlantis.si> wrote in message
news:uqPYi%23l0EHA.2568@TK2MSFTNGP10.phx.gbl...
> Evan,
>
> If you use spaces in names you have to put them in brackets. E.g. c:\My
> Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
> Backup\Friday BKF file". If you don't do it, system will look for location
> c:\My
>
> Mike
>
> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
>> thanks, i found in the log file that ntbackup was trying to find backup
>> definition xyz.bkf, where the name was 'abc xyz.bkf'.
>>
>> I think it is a bug in scheduler with backup where there is a space in
>> bkf name!!!
>>
>>
>> Evan Camilleri
>>
>>
>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
>> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
>>> Hi Evan,
>>>
>>> this error usually means that destination folder can't be accessed (e.g.
>>> due to permissions or destination folder does not exist).
>>>
>>> Make sure that account that will run the backup has sufficient
>>> permissions on the folder (write permissions on folder and e.g. share)
>>> where the backup will be stored and make sure that destination folder
>>> (or share) actually exists...
>>>
>>> Mike
>>>
>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
>>>> ntbackup returned code 0x1f when running from scheduler
>>>>
>>>> when running from ntbackup it works but asks for prompts!
>>>>
>>>> Evan Camilleri
>>>>
>>>
>>>
>>
>>
>
>
Evan,
If it doesn't work, can you post whole command that you use to perform
Backup...
Mike
"Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
news:%23MZ7cey0EHA.3408@tk2msftngp13.phx.gbl...
>i did, and it took the last part!
>
>
> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> news:uqPYi%23l0EHA.2568@TK2MSFTNGP10.phx.gbl...
>> Evan,
>>
>> If you use spaces in names you have to put them in brackets. E.g. c:\My
>> Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
>> Backup\Friday BKF file". If you don't do it, system will look for
>> location c:\My
>>
>> Mike
>>
>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>> news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
>>> thanks, i found in the log file that ntbackup was trying to find backup
>>> definition xyz.bkf, where the name was 'abc xyz.bkf'.
>>>
>>> I think it is a bug in scheduler with backup where there is a space in
>>> bkf name!!!
>>>
>>>
>>> Evan Camilleri
>>>
>>>
>>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
>>> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
>>>> Hi Evan,
>>>>
>>>> this error usually means that destination folder can't be accessed
>>>> (e.g. due to permissions or destination folder does not exist).
>>>>
>>>> Make sure that account that will run the backup has sufficient
>>>> permissions on the folder (write permissions on folder and e.g. share)
>>>> where the backup will be stored and make sure that destination folder
>>>> (or share) actually exists...
>>>>
>>>> Mike
>>>>
>>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>>>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
>>>>> ntbackup returned code 0x1f when running from scheduler
>>>>>
>>>>> when running from ntbackup it works but asks for prompts!
>>>>>
>>>>> Evan Camilleri
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
do not worry
i replaced space with _ and now it works
Thanks anyway for the help
Evan
"Miha Pihler" <mihap-news@atlantis.si> wrote in message
news:%23RYRKry0EHA.2016@TK2MSFTNGP15.phx.gbl...
> Evan,
>
> If it doesn't work, can you post whole command that you use to perform
> Backup...
>
> Mike
>
> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> news:%23MZ7cey0EHA.3408@tk2msftngp13.phx.gbl...
>>i did, and it took the last part!
>>
>>
>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
>> news:uqPYi%23l0EHA.2568@TK2MSFTNGP10.phx.gbl...
>>> Evan,
>>>
>>> If you use spaces in names you have to put them in brackets. E.g. c:\My
>>> Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
>>> Backup\Friday BKF file". If you don't do it, system will look for
>>> location c:\My
>>>
>>> Mike
>>>
>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>>> news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
>>>> thanks, i found in the log file that ntbackup was trying to find backup
>>>> definition xyz.bkf, where the name was 'abc xyz.bkf'.
>>>>
>>>> I think it is a bug in scheduler with backup where there is a space in
>>>> bkf name!!!
>>>>
>>>>
>>>> Evan Camilleri
>>>>
>>>>
>>>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
>>>> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
>>>>> Hi Evan,
>>>>>
>>>>> this error usually means that destination folder can't be accessed
>>>>> (e.g. due to permissions or destination folder does not exist).
>>>>>
>>>>> Make sure that account that will run the backup has sufficient
>>>>> permissions on the folder (write permissions on folder and e.g. share)
>>>>> where the backup will be stored and make sure that destination folder
>>>>> (or share) actually exists...
>>>>>
>>>>> Mike
>>>>>
>>>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
>>>>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
>>>>>> ntbackup returned code 0x1f when running from scheduler
>>>>>>
>>>>>> when running from ntbackup it works but asks for prompts!
>>>>>>
>>>>>> Evan Camilleri
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
OK, I'll supply my command line, in the hopes it will help me and others in
the future:
C:\WINDOWS\system32\ntbackup.exe backup "@d:\masters\usdewilco1r01.bks" /d
"DIFF tape #1 - Treasury cluster shared disk" /v:no /r:no /rs:no /hc:on /m
differential /j "DIFF shares backup" /l:s /a /t "DIFF tape #1 - Treasury
cluster shared disk"
Just to recap my similar situation. I have a backup job that I want to run
every morning. If I enter the above at the command line, the backup job
kicks off and runs no problem. I am a local admin on this box. When I try
to schedule this same job, using my account or another local administrator on
the box, I get the 0x1f last result.
Like you, I figure this is some sort of permissions issue, but it won't run
- even when I set the job to use my account credentials. I guess something
must be wrong with the scheduled job, but I cannot tell what.
Any ideas?
"Miha Pihler" wrote:
> Evan,
>
> If it doesn't work, can you post whole command that you use to perform
> Backup...
>
> Mike
>
> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> news:%23MZ7cey0EHA.3408@tk2msftngp13.phx.gbl...
> >i did, and it took the last part!
> >
> >
> > "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> > news:uqPYi%23l0EHA.2568@TK2MSFTNGP10.phx.gbl...
> >> Evan,
> >>
> >> If you use spaces in names you have to put them in brackets. E.g. c:\My
> >> Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
> >> Backup\Friday BKF file". If you don't do it, system will look for
> >> location c:\My
> >>
> >> Mike
> >>
> >> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> >> news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
> >>> thanks, i found in the log file that ntbackup was trying to find backup
> >>> definition xyz.bkf, where the name was 'abc xyz.bkf'.
> >>>
> >>> I think it is a bug in scheduler with backup where there is a space in
> >>> bkf name!!!
> >>>
> >>>
> >>> Evan Camilleri
> >>>
> >>>
> >>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> >>> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
> >>>> Hi Evan,
> >>>>
> >>>> this error usually means that destination folder can't be accessed
> >>>> (e.g. due to permissions or destination folder does not exist).
> >>>>
> >>>> Make sure that account that will run the backup has sufficient
> >>>> permissions on the folder (write permissions on folder and e.g. share)
> >>>> where the backup will be stored and make sure that destination folder
> >>>> (or share) actually exists...
> >>>>
> >>>> Mike
> >>>>
> >>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> >>>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
> >>>>> ntbackup returned code 0x1f when running from scheduler
> >>>>>
> >>>>> when running from ntbackup it works but asks for prompts!
> >>>>>
> >>>>> Evan Camilleri
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
>
OK, I'll supply my command line, in the hopes it will help me and others in
the future:
C:\WINDOWS\system32\ntbackup.exe backup "@d:\masters\usdewilco1r01.bks" /d
"DIFF tape #1 - Treasury cluster shared disk" /v:no /r:no /rs:no /hc:on /m
differential /j "DIFF shares backup" /l:s /a /t "DIFF tape #1 - Treasury
cluster shared disk"
Just to recap my similar situation. I have a backup job that I want to run
every morning. If I enter the above at the command line, the backup job
kicks off and runs no problem. I am a local admin on this box. When I try
to schedule this same job, using my account or another local administrator on
the box, I get the 0x1f last result.
Like you, I figure this is some sort of permissions issue, but it won't run
- even when I set the job to use my account credentials. I guess something
must be wrong with the scheduled job, but I cannot tell what.
Any ideas?
"Miha Pihler" wrote:
> Evan,
>
> If it doesn't work, can you post whole command that you use to perform
> Backup...
>
> Mike
>
> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> news:%23MZ7cey0EHA.3408@tk2msftngp13.phx.gbl...
> >i did, and it took the last part!
> >
> >
> > "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> > news:uqPYi%23l0EHA.2568@TK2MSFTNGP10.phx.gbl...
> >> Evan,
> >>
> >> If you use spaces in names you have to put them in brackets. E.g. c:\My
> >> Folder\Daily Backup\Friday BKF file would then be "c:\My Folder\Daily
> >> Backup\Friday BKF file". If you don't do it, system will look for
> >> location c:\My
> >>
> >> Mike
> >>
> >> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> >> news:%23g7xWUl0EHA.2012@TK2MSFTNGP15.phx.gbl...
> >>> thanks, i found in the log file that ntbackup was trying to find backup
> >>> definition xyz.bkf, where the name was 'abc xyz.bkf'.
> >>>
> >>> I think it is a bug in scheduler with backup where there is a space in
> >>> bkf name!!!
> >>>
> >>>
> >>> Evan Camilleri
> >>>
> >>>
> >>> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> >>> news:%23Ncx%23Hk0EHA.2804@TK2MSFTNGP15.phx.gbl...
> >>>> Hi Evan,
> >>>>
> >>>> this error usually means that destination folder can't be accessed
> >>>> (e.g. due to permissions or destination folder does not exist).
> >>>>
> >>>> Make sure that account that will run the backup has sufficient
> >>>> permissions on the folder (write permissions on folder and e.g. share)
> >>>> where the backup will be stored and make sure that destination folder
> >>>> (or share) actually exists...
> >>>>
> >>>> Mike
> >>>>
> >>>> "Evan Camilleri" <evan@holistic.com.mt.nospam> wrote in message
> >>>> news:%23tkd5Cj0EHA.1420@TK2MSFTNGP10.phx.gbl...
> >>>>> ntbackup returned code 0x1f when running from scheduler
> >>>>>
> >>>>> when running from ntbackup it works but asks for prompts!
> >>>>>
> >>>>> Evan Camilleri
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
>