cant use binatone DT 845W wifi modem installed by airtel broadband for bsnl broadband?

well....in 2011 airtel installed binatone DT 845w modem at my place in noida.Now i got transferred to jammu & kashmir where i have bsnl broadband connection.I tried necessary settings ,but nothing seems working. Then i went through few threads and came to know that firmware needs to be downgraded to .2 version.My current firmware version is .8...... I tried to downgrade firmware to .2 version but it doesnt accept it...........kindly help so that i can use my binatone modem(supplied and installed by airtel) for my bsnl broadband connection....thanks

First of all download the DT4W-A1.002 firmware from the below attachment. After installing the firmware, you will need to do the below:

Tab: Interface Setup -> Internet
Select Virtual Circuit as PVC2
VPI = 0 and VCI = 35
Disable all other Virtual Circuits.

ATM QoS = UBR
PCR = 0

ISP = PPPoA/PPPoE

Servicename = blank
Username = username from BSNL
Password = password from BSNL

Connection = Always On
Get IP Address = Dynamic

NAT = Enable

Defaut Route = Yes

TCP MTU = 1454 or 1492

Dynamic Route = RIP2-B
Direction = Both
Multicast = Disabled
Mac Spoofing = Disabled

well i tried all and my internet settings are fine as internet blinks on my modem after putting in these settings but it doesnt work when i try to open page...this is what i get from diagonstics tab..................
> Testing Ethernet LAN connection ...
PASS

>> Testing ADSL Synchronization .
PASS

>> Testing ATM OAM segment ping ...
FAIL

>> Testing ATM OAM end to end ping ...
FAIL

>> Ping Primary Domain Name Server .
PASS

>> Ping yahoo
PASS

Testing ATM OAM segement and end to end ping fail...............please help

Did you try to downgrade the firmware to DT4W-A1.002? You can even watch the video on how to configure Binatone DT 845W for BSNL Broadband from this link - http://www.youtube.com/watch?v=BpYVQrsP_sI

showkat have you solve your problem ?

kindly help me I ma facing same problem

Quote:

---

Originally Posted by sukhsaini

showkat have you solve your problem ?

kindly help me I ma facing same problem

---

Can you please specify what is the problem you are facing in details? I think that you need to download the latest version of the firmware from the below link and then setup with the settings given above:

http://mywifi.airtelbroadband.in/air.../firmware.html

I had DT 845W wireless ADSL2+ Router of BINATONE company.

Simple setup worked for me with BSNL Modem used for Broadband connection:

1. Hard Reset.
2. Set Encapsulation to Dynamic IP Address under Internet. Did not change anything else in Internet setup. Not even any setup required for Dynamic IP. Kept it default to "1483 Bridged IP LLC"
3. Save changes.
4. LAN setup - Disable DHCP. Save.
5. Wireless setup - provide SSID name.
6. Choose Authentication Type as WPA-PSK/.... Provide password to login.
7. Save and restart.