How to do Overclocking in MSI P41-C33?

Please help me as I am newer to Overclocking. This is my first time and I want to Overclock MSI P41-C33 to at least 3.6GHz. I have core 2 duo E7200. Since I am new, so I thought asking you experts. All your replies will be appreciated. Thank you in advance. The rest specifications are as follows:

• MSI P67A-C45 ; Core I3 @3.10GHz; Cooler Master Hyper 212 Plus;
• Kingston HyperX Blu 2x2GB DDR3 @1600GHz; Asus GTS 450 1GB;
• HDD Samsung 250GB 7200; DVD LG Lightscribe;
• Cooler Master Extreme Power Plus 550W;
• Cooler Master Elite 330.

Go to the BIOS, choose the menu cell, its memory-Z cek, set your memory latency in advance D-RAM configuration must be 6 early, the times at 6-9-9-9 -24 tray first step, increased the CPU clock. At the beginning let the CPU ratio to Auto, set CPU FSB to 220 manually, save and reboot back again adjusted to 240 = 3600hz (attached), save and reboot. in the windows of wait and see if the 5 minutes the system will crash / hang / blue screen, which should return to the BIOS and under the CPU clock.

I would like to notify you that do not forget to increase your CPU voltage, maximum of 1,390 volts, as E5700 can now run and stability in the Voltage Tweak. NOT easy to change the button OC, confusion. If you want to do more OC tray, disable Spread Spectrum CPU, my E5700 former can be up to 3785 GHz (36%), 880 MHz FSB CPU 460 and get raised, after changing the Multiplier CPU to 14x. so the memory switch to Auto, and find 8-8-8-20. after we checked into the Everest test 10 minutes Dirt2 game is well run. I think this board can do more OC if you understand their realy2 complicated men. is not easy as it gets, not easy and that the Biostar T-Series (my motherboard DDR2 old).

P41 motherboard can only support memory 1066 (1333 for the OC version), I think the proc finally 7GHz together again, and it's nice. u should tray to lower the CPU multiplier to 14x connection, disable Intel EIST + spread spectrum and more CPU FSB clock. Set the FSB ratio to 1:1.60 memory in my E5700 now 24% (virtualy 3.710Ghz in CPUZ and Everest), but 3.975Ghz CPU FSB is 265 and 424 Mem Bus, DRAM: FSB Ratio 16:10. So the question is, or up your CPU and memory voltage, however, on the Cell? Main CPU voltage should be intensified 5-6, 1.37/1.39 and increased the tension of the other at 5.6 step a. reset the BIOS.

I by myself tested with 4 hours of play F1 2010 and is running very well. Also, I think with this proc and motherboard can not be higher than 310 FSB at 12x mltp. To know the limitations of this motherboard P41, G41 based in CZ. Grin No P45 and the speed of DRAM support not only 1066 1333. I will soon, if possible will I go 320 FSB or higher, also still looking for the new formula for Overclocking with this motherboard, but will blow it.

If you ask me then I personally raised my CPU and memory voltage in the drop down box. My relationship maximum CPU multiplier is 9.5. So Know my cpu MHz to 3230 times MEM core voltage is 1.397V 6-7-7-20 FSB memory ratio of 1:1.60, bus speed 340 MHz CPU, when I try to lift the bus to 345 MHz OC warning is not then I have to go to the bios and lower it to 340 MHz Stabe test in OCCT as 9 hours. Since Intel EIST disable Spread Spectrum.

Memory expansion for MicrostarInt P41-C33 (DDR3-1333MHz) motherboard, the P41-C33 MicrostarInt (DDR3-1333MHz) Mother takes the PC3-10666 DDR3-1333 240pin SDRAM DIMM Memory Type, and comes installed with 1 GB memory. You can update your MicrostarInt P41-C33 (DDR3-1333MHz) Mother of up to 8GB of memory, the system has two (2 banks of 1) to install memory, already with standard memory of 1 GB installed. Hope the information that I have provided is enough.