Printable View
I used portforward.com guide to setup my static IP. But I am getting the following problem. When I run Ipconfig it show default gateway=192.168.1.1 but my router information page show it as 59.94.128.1. I had configure the static page using 192.168.1.1. Some more information:
Laptop: Intel core i7
OS: Windows XP service pack 2
Broadband Plan: Unlimited 750 plan
Modem:NOKIA SIEMENS SL2_141
Please help to get resolve this problem. Thank you in advance.
Modem configuration for type II modem-NOKIA SIEMENS SL2_141
1]In Internet Explorer type 192.168.1.1 and press enter
2]username as admin and password as admin and click Ok
3]select Advanced Setup
4]select Edit button against VPI -0 and VCI-35
5]Click next
6]Select PPP over Ethernet
7]type username and password as given by BSNL
8]In the PPPoE Service Name= “dataone”
9] Enable PPP Debug Mode and Bridge PPPoE Frames Between WAN and Local Ports
10]Clixk next
11]selectEnable NAT and click OK
12]click save
13]Click Save/Reboot
14] select Management and click Save/Reboot
15]select Save/Reboot button
Thank for your valuable suggestion. I followed all the steps step-by-step. The setting is done successfully and it is working fine. But the problem is that while searching on net I found that after doing this setting the ADSL wireless work in Unsecure mode which is not recommended. So can you provide any instruction so that it work in secured mode?Your effort will be appreciated.
Perform the following step by step and this is important otherwise the ADSL wireless works in an unsecured mode which is not recommended.
1} Follow the same step from 1-3 as given above.
2}From menu select Wireless
3}From menu select Security
4}In network authentication select WPA-PSK
5}Click Save and Apply
6}Select Management
7}Select Save/Reboot
8}Select Save/ Reboot
9}You are done with wireless security configuration.
I got the modem from BSNL Broadband was Siemens SL2-141. I had a static IP which I need to configure to my web browser and It was configured by BSNL people. But it is not helping to solve my issue as I was not able to use my static IP to connect to the Internet. Can you guide me further so that my issue get resolve. Please provide the detail information as I do not have detail knowledge about this setting. Thank you in Advance.
how to configure my dsl router nokia siemens sl2_141 for advance setting and DMZ option
http://forums.techarena.in/networkin...ty/1399839.htm Please refer this link it may you to configure your dsl router.Quote:
Originally Posted by suryakant